A new testing method using a mini split Hopkinson tensile bar was employed in the impact tests of Lincoln wool fibers. Stress-strain curves of Lincoln wool fibers subjected to impact loadings at strain rates in the order of 102s—1 were obtained, which fill the gap in the impact data for Lincoln wool fibers. For comparison, quasi-static tests were also carried out with a single Lincoln wool fiber using a Micro-Tester. Stress level was observed to increase with increasing strain rates.
Feughelman, M. , "Mechanical Properties and Structure of Alpha-keratin Fibers,"UNSW Press, Sydney, Australia (1997).
2.
Simpson, W. S., and Crawshaw, G. H., (Eds.), "Wool: Science and Technology,"Woodhead Publishing Limited, Cambridge , England (2000).
3.
Wang, X., Predicting the Strength Variation of Wool from Its Diameter Variation , Textile Res. J. 70, 191-194 (2000).
4.
Yu, W., Postle, R., and Yan, H., Characterization of the Weak Link of Wool Fibers, J. Appl. Polym. Sci. 90, 1206-1212 (2003 ).
5.
Hearle, J.W.S. , A Critical Review of the Structural Mechanics of Wool and Hair Fibers, Int. J. Biol. Macromol. 27, 123- 138 (2000).
6.
Feughelman, M., A Model for the Mechanical Properties of the α-Keratin Cortex, Textile Res. J. 64, 236-239 (1994).
7.
Wortmann, F.-J. , and Zahn, H., The Stress-strain Curve of α-Keratin Fibers and the Structure of the Intermediate Filament, Textile Res. J. 64, 737-743 (1994).
8.
Chapman, B.M. , A Mechanical Model for Wool and Other Keratin Fibers, Textile Res. J. 39, 1102-1109 (1969 ).
9.
Tao, X., and Postle, R., A Viscoelastic Analysis of the Keratin Composite, Part I: Longitudinal and Transverse Mechanical Properties, Textile Res. J. 59, 123-138 (1989).
10.
Lyons, W.J. , "Impact Phenomena in Textiles,"M.I.T. Press, Cambridge, Massachusetts, USA (1963).
11.
Hall, I.H., The Effect of Temperature and Strain Rate on the Stress-strain Curve of the Oriented Isotactic Polypropylene, J. Polym. Sci. 54, 505-522 (1961).
12.
Hopkinson, B., A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets, Philos. Trans. R. Soc. Lond. A213, 437-456 (1914).
13.
Davies, R.M. , A Critical Study of the Hopkinson Pressure Bar, Philos. Trans. R. Soc. Lond. A240, 375-457 (1948).
14.
Kolsky, H., An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading, Proc. Phys. Soc. Lond. 62B, 676-700 (1949).
15.
Harding, J. , Wood, E.D., and Campbell , J.D., Tensile Testing of Materials at Impact Rate of Strain, J. Mech. Eng. Sci. 2, 88- 96 (1960).
16.
Nicholas, T. , Tensile Testing of Materials at High Rates of Strain, Exp. Mech. 6, 395-402 (1966).
17.
Staab, G.H. , and Gilat, A., A Direct Tension Split Hopkinson Bar for High Strain Rate Testing, Exp. Mech. 31, 232-235 (1991).
18.
Zhao, H., Elnasri, I., and Girard, Y., Perforation of Aluminium Foam Core Sandwich Panels Under Impact Loading - an Experimental Study, Int. J. Impact Eng. 34(7), 1246-1257 (2007).
19.
Dai, L.H. , Liu, L.F., and Bai , Y.L., Formation of Adiabatic Shear Band in Metal Matrix Composites, Int. J. Solids Struct . 41, 5979-5993 (2004).
20.
Gilat, A., and Cheng, C.-S., Modeling Torsional Split Hopkinson Bar Tests at Strain Rates Above 10,000 s-1, Int. J. Plasticity18, 787-799 (2002).
21.
Lewis, J.L. , and Goldsmith, W., The Dynamic Fracture and Prefracture Response of Compact Bone by Split Hopkinson Bar Methods, J. Biomech . 8, 27-40 (1975).
22.
Lewis, J.L. , and Goldsmith, W., Biaxial Split Hopkinson Bar for Simultaneous Torsion and Compression, Rev. Sci. Instrum. 44, 811-813 (1973).
23.
Dong, X.L., Leung, M.Y., and Yu, T.X., Characteristics Method for Viscoelastic Analysis in a Mini Hopkinson Tensile Bar, Int. J. Mod. Phys. B (in Press).
24.
Leung, M.Y. , and Yu, T.X., Dynamic Characterization of Micro-scale Samples Using Hopkinson Tensile Bar Technique, J. Strain Anal . 43, 595-607 (2008).
25.
Khodier, S.A. , Measurement of Wire Diameter by Optical Diffraction , Opt. Laser Technol. 36, 63-67 (2004).
26.
Lu, G., and Yu, T.X., "Energy Absorption of Structures and Materials,"Woodhead Publishing Limited, Cambridge, England (2003).
