The physical and chemical characteristics of fibers after biological, chemical, and enzymatic retting were studied for kenaf cultivated in Jeju, Korea. Retting removes non-fibrous materials leaving separated fibers. Quantitative chemical analyses of kenaf fibers after retting were conducted using gas chromatography—mass spectrometry (GC— MS). Before retting, the syringyl lignin content was 16 mg/g and guaiacyl lignin content was 2.9 mg/g. The syringyl content was reduced by all three retting treatments: bio-retting, chemical retting with NaOH and enzymatic retting with pectinase. Treatment with 3% pectinase decreased the syringyl lignin content to almost one-half that observed in the unretted kenaf and also decreased the guaiacyl lignin content. The ratio of syringyl type lignin/guaiacyl type lignin ranged from 5.8 down to 2.4. Thermogravimetric analysis and differential scanning calorimetry also demonstrated the reduction in non-cellulose content. Viscosity measurements show that the retting processes did not degrade the cellulose polymers of the kenaf fibers.
Cho, N.-S., and Choi, T.-H., Manufacturing of Korean Traditional Paper (Hanji) from Fast-Growing New Fiber Plant: Kenaf, J. KoreaTappi28(4), 7—16 (1996).
2.
Cho, N.-S., and Tan, G.-M., Optical Property of Chemiemechanical Pulp Sheet from Fast-Growing Kenaf, J. KoreaTappi29(2), 25—35 (1997).
3.
Lee, H.-J., Ahn, C.-S., Kim, J.-H., Yoo, H.-J., Han, Y.-S., and Song, K.-H., Effect of Enzyme Retting on the Fiber Separation of Kenaf Bast: Influence of Chelator, J. Korean Soc. ClothingTextiles, 28(7), 873—881 (2004).
4.
Lee, H.-J., Han, Y.-S., Yoo, H.-J., Kim, J.-H., Song, K.-H., and Ahn, C.-S., Effect of Chemical Retting on the Fiber Separation of Kenaf Bast, J. Korean Soc. ClothingTextiles, 27(9/10), 1144—1152 (2003).
5.
Morrision, W.H. III, Akin, D.E., Ramaswamy, G., and Bald-win, B., Evaluating Chemically Retted Kenaf Using Chemical, Histochemical, and Microspectrophotometric Analyses, Textile Res. J.66(10), 651—656 (1996).
6.
Parikh, D.V. , Calamari, T.A., Sawhney, A.P.S., Blanchard, E.J., Screen, F.J., Warnock, M., Muller, D.H., and Stryjewski , D.D., Improved Chemical Retting of Kenaf Fibers, Textile Res. J.72(7), 618—624 (2002).
7.
Wang, J., and Ramaswamy, G.N., Physical and Chemical Properties of Wet Processed Hemp and Kenaf, AATCC Review, June, 22—26 (2005),
8.
Tao, W., Calamari, T.A., and Crook, L., CardingKenaf for Nonwovens , Textile Res. J.68(6), 402—406 (1998).
9.
Wang., J., and Ramaswamy, G.N., One-Step Processing and Bleaching of Mechanically Separated Kenaf Fibers: Effects on Physical and Chemical Properties, Textile Res. J.73(4), 339— 344 ( 2003).
10.
Ramaswamy, G.N. , Body, C.R., Bel-Burger, P., and Kimmel, L., Kenaf / Cotton Blends for Textiles, Family Consumer Sci. Res. J.24(2), 180—190 (1996).
11.
Ramaswamy, G.N. , and Easter, E.P., Durability andAesthetic Properties of Kenaf/Cotton Blend Fabrics, Textile Res. J.67(11), 803—808 (1997).
12.
Lee, H.-J., Ahn, C.-S., Kim, G.-H., Yoo, H.-J., Han, Y.-S., and Song, K.-H., Characteristics of Kenaf/ Rayon Fabrics, J. Korean Soc. ClothingTextiles28(9/10), 1282—1291 (2004).
Morrision, W.H. Iii, Akin, D.E., Archibald, D.D., Dodd R.B., and Raymer, P.L., Chemical and Instrumental Characterization of Maturing Kenaf Core and Bast, Indust. Crops Products10(1), 21—34 (1999).
15.
Nishimura, N., Izumi, A., and Kuroda, K., Structural Characterization of Kenaf Lignin: Differences among Kenaf Varieties, Indust. Crops Products15(2), 115—122 ( 2002).
16.
Haigler, C.H. , The Functions and Biogenesis of Native Cellulose, in Cellulose Chemistry and Its Application, T. P. Nevell, and H. S. Zeronian, eds, Ellis Horwood, Chichester, West Sussex, England, pp. 30—81, 1985.
17.
Wardrop, A.B. , Xylem Cell Development, J. R. Barnett, ed., Academic Press, London, pp. 115-152,1981.
18.
Kuroda, K., lzumi, A., .Mazumder, B.B., Ohtani, Y., and Sameshima, K., Characterization of Kenaf (Hibiscus cannabinus) Lignin by Pyrolysis-Gas Chromatography-Mass Spectrometry in the Presence of Tetramethylammonium Hydroxide, J. Anal. Appl. Pyrolysis64(2), 453—463 (2002).
19.
Sewalt, V.J.H. , de Oliveira, W., Glasser, W.G., and Fontenot , J.P., Lignin Impact on Fibre Degradation: 2. A Model Study Using Cellulosic Hydrogels, J. Sci. Food Agric.71(2), 204—208 (1996).
20.
Han, Y.-S., Yoo, H.-J., Lee, H.-J., Rhie, J.-S., Kim, J.-H., Song, K.-H., and Ahn, C.-S., Research for Kenaf Fiber Production in Korea, J. Korean Soc. ClothingTextiles27(7), 862— 871 (2003).
21.
Lindsley, C.H. , Rapid Dispersion of Cellulose in Cupriethylerediamine , Textile Res. J.21, 286 (1951).
22.
Baeza, J., and Freer, J., Chemical Characterization of Wood and Its Components, in Wood and Cellulosic Chemistry, second edition, D.N.-S. Hon, and N. Shiraishi, eds, Marcel Dekker, New York, NY, pp. 275—384, 2001.
23.
Pappas, C., Tarantilis, P.A., and Polissiou, M., Determination of Kenaf (Hibiscus cannabinus L.) Lignin in Crude Plant Material Using Diffuse Reflectance Infrared Fourier Transform Spectroscopy, Appl. Spectrosc.52(11), 1399—1402 (1998).
24.
Sarkanen, K.V. , Change, H.-M., and Ericsson , B., Species Variation in Lignin, Tappi, 50, 572—575 ( 1967).
