Influence of Repellent Finishing on the Surface Free Energy of Cellulosic Textile Substrates

Abstract

The aim of this research is to investigate the influence of a fluorochemical repellent treatment with and without an added durable press finish on the surface free energy changes of a cellulosic textile substrate as well as the durability of the finishing agents. For this purpose, contact angles are measured based on the goniometric-sessile drop tech nique. Different theoretical models are chosen to calculate the solid surface free energy and its dispersive and polar components. A statistical evaluation of the results with ANOVA (P < 0.01 ) shows that the values of the surface free energy components of the finished textile substrate depend on a theoretical model as well as the chosen liquid combinations. Coating the textile substrate with fluoropolymer repellents alone and in combination with the durable press finish changes the highly hydrophilic polar cellulosic fabric into an almost apolar low energy solid. Laundering of the finished substrate in a surfactant aqueous solution decreases oil repellency, and a full rearrangement of the fluorocarbon polymer film on the textile surface is achieved after the heat treatment. What is also achieved is excellent durability of the fluoropolymer film on the textile substrate.

Get full access to this article

View all access options for this article.

References

Adamson, A.W. , "Physical Chemistry of Surfaces," ch. X. 5th ed., John Wiley and Sons, NY, 1990. pp. 379-420.

Chibowski, E. , and González-Caballero , F. , Theory and Practice of Thin-Layer Wicking. Langmuir 9, 330-340 (1993).

Chibowski, E. , and Hołysz , L. , Use of the Washburn Equation for Surface Free Energy Determination, Langmuir 8, 710-716 (1992).

Chibowski, E. , Ontiveros-Ortega , A. , and Perea-Caprio. R. , On the Interpretation of Contact Angle Hysteresis, J. Adhes. Sci. Technol. 16(10), 1367-1404 (2002 ).

Corpat, J.M. , and Dessaint, A. , Fluorine-based Textile Finishes , Melliand Textilber. Eng. 78(9), E135-E137 ( 1997).

Di, J. , Perwuelz, A. , and Gueguen, V. , The Surface Energy of PET Fabrics Coated with Silicone, J. Textile Inst. 92, 184-192 (2001).

Ellison, A.H. , Fox, H.W. , and Zisman, W.A. , Wetting of Fluorinated Solids by Hydrogen-bonding Liquids, J. Phys. Chem. 57, 622-627 (1953).

Fox, H.W. , and Zisman, W.A. , The Spreading of Liquids on Low-Energy Surfaces, II: Modified Tetrafluoroethylene Polymers, J. Colloid Interface Sci. 7, 109-121 (1952).

Fowkes, F.M. , Attractive Forces at Interfaces, Ind. Eng. Chem. 56(12), 40-52 (1964).

10.

Fowkes, F.M. , McCarthy, D.C. , and Mostafa, M.A. , Contact Angles and the Equilibrium Spreading Pressures of Liquids on Hydrophobic Solids , J. Colloid Interface Sci. 78(1), 200-206 (1980).

11.

Gindl, M. , Sinn, G. , Gindl, W. , Reiterer, A. , and Tschegg, S. , A Comparison of Different Methods to Calculate the Surface Free Energy of Wood Using Contact Angle Measurements, Colloids Surfaces A: Physicochem . Eng. Aspects 181, 279-287 (2001).

12.

Good, R.J. , Contact Angle, Wetting, and Adhesion: A Critical Review, J. Adhes. Sci. Technol. 6(12), 1269-1302 (1992).

13.

Grancarić, A.M. , Chibowski, E. , Pušić , T. , Soljačić, I. , and Plantić, L. , Surface Free Energy of Conventional and Enzymatically Scoured Cotton Fabrics , in "Proc. 1st International Textile, Clothing and Design Conference—Magic World Textiles," October, 6 to 9, 2002, Dubrovnik, Croatia, 2002, pp. 267-273.

14.

Grottenmüller, R. , Fluorocarbons—An Innovative Aid to the Finishing of Textiles, Melliand Int. 4, 278-281 (1998).

15.

Ho, C.C. , and Khew, M.C. , Surface Free Energy Analysis of Natural and Modified Natural Rubber Latex Films by Contact Angle Method , Langmuir 16, 1407-1414 (2000 ).

16.

Holme, I. , New Developments in the Chemical Finishing of Textiles, J. Textile Inst. 84, 520-533 (1993).

17.

Höpken, J. , and Möller, M. , Low Surface Energy Polystyrene, Macromolecules 25(5), 1461-1467 (1992).

18.

Kaelble, D.H. , Dispersion-Polar Surface Tension Properties of Organic Solids, J. Adhesion 2, 50 (1970).

19.

Kissa, E. , Repellent Finishes, in "Handbook of Fiber Science and Technology: Chemical Processing of Fibers and Fabrics: Volume II, Functional Finishes, Part B," International Fiber Science and Technology Series/2 , M. Lewin , and S. B. Sello , Eds., Marcel Dekker, Inc. , NY, 1984, pp. 141-210.

20.

Lämmermann, D. , Fluorocarbons in Textile Finishing— Properties and Applications, Melliand Textilber. Eng. 72(11), E380-E383 (1991).

21.

"Modem Approaches to Wettability, Theory and Applications," M. E. Schrader, and G. I. Loeb, Eds., Plenum Press, NY, 1992.

22.

Owens, D.K. , and Wendt, R.C. , Estimation of the Surface Free Energy of Polymers, J. Appl. Polym. Sci. 13, 1741-1747 (1969).

23.

Simončič, B. , and Černe , L. , The Use of Fluorocarbon Polymers in Modem Oil- and Water-repellent Finishes, Tekstilec 44(9-10), 263-270 (2001).

24.

van Oss, C.J. , Use of Combined Lifshitz-van der Waals and Lewis Acid-Base Approaches in Determining the Apolar and Polar Contributions to Surface and Interface Tensions and Free Energies, J. Adhes. Sci. Technol. 16(6), 669-677 (2002).

25.

van Oss, C.J. , Chaudhury, M.K. , and Good, R.J. , Interfacial Lifshitz-van der Waals and Polar Interactions in Macroscopic Systems, Chem. Rev. 88, 927-941 (1988).

26.

van Oss, C.J. , Good, R.J. , and Chaudhury , M.K. , Additive and Nonadditive Surface Tension Components and the Interpretation of Contact Angles, Langmuir 4, 884-891 (1988).

27.

Wu, S. , Calculation of Interfacial Tension in Polymer Systems, J. Polym. Sci., Part C 34, 19-30 (1971).

28.

Wu, W. , and Nancollas, G.H. , Determination of Interfacial Tension from Crystallization and Dissolution Data: A Comparison with Other Methods, Advan. Colloid Interface Sci. 79, 229-279 (1999).