Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Abstract

Stitched multilayer fabrics have drawn increasing attention as reinforcing materials for high performance composites due to their integrity and wide variety. In this paper, the focus is on the effect of stitches on the equivalent permeability of interbundle channels, which is inves tigated systematically through numerical simulation of Navier-Stokes equations and expressed as the value of K/K ₀. The results show that stitches may dramatically affect the permeability of interbundle channels, even if stitch size is relatively small. Thus, this effect has to be considered when establishing an effective permeability model for stitched fabrics. The nu merical simulation results also suggest that the effect of stitches is quite different for a different stitch size, off-center position, slope, array, distribution density, and average Darcy velocity in fiber bundles. Changes in K/K ₀ with these parameters are discussed.

Get full access to this article

View all access options for this article.

References

Berdichevsky. A.L. , and Cai, Z. , Preform Permeability Predictions by Self-Consistent Method and Finite Element Simulation, Polym. Compos. 14(2), 132-143 (1993).

Bruschke, M.V. , and Advani, S.G. , Flow of Generalized Newtonian Fluids Across a Periodic Array of Cylinders, J. Rheol. 37, 479-498 (1992).

Carirns, D.S. , Humbert, D.R. , and Mandell, J.F. , Modeling of Resin Transfer Molding of Composite Materials with Oriented Unidirectional Plies, Compos. Part A Appl. Sci. Manuf. 30, 375-382 (1999).

Carman, P.C. , Fluid Flow through Granular Beds. Trans. Int. Chem. Eng. 15, 150-1156 (1937).

Darcy, H.P.G. , "Les Fontaines Bibliques de la Ville de Dijon," Victor Dalmont, Paris, 1856.

Gebart, B.R. , Permeability of Unidirectional Reinforcements for RTM, J. Compos. Mater. 26(8), 1100-1133 (1992).

Gutowski, T.G. , Mohgaki, T. , and Cai, Z. , The Catsolidation of Laminate Composites , J. Compos. Mater. 21, 172-188 (1987).

Kolodziej, J.A. , Dziecilak. R. , and Konczak, Z. , Permeability Tensor for Heterogeneous Porous Medium of Fibre Type, Trans. Por. Media 32, 1-99 (1998).

Lee, L.J. , Liquid Composite Molding. "Advanced Composites Manufacturing ," Timothy G. Gutowsiki , Ed., 1997, p. 393.

10.

Lundström. T.S. , The Permeability of Non-crimp Stitched Fabrics, Compos. Part A Appl. Sci. Manuf. 31, 1345-1353 (2000).

11.

Nakayama, A. , "PC-Aided Numerical Heat Transfer and Convective Flow," CRC Press. Boca Raton, FL , 1995.

12.

Panton, R.L. , "Incompressible Flow," John Wiley & Sons. NY, 1984 .

13.

Patankar, S.V. , "Numerical Heat Transfer and Fluid Flow," Hemisphere, London, 1980.

14.

Phelan, F.R. , "Proc. Advanced Composite Materials: New Developments and Application ," Detroit. MI, 1991 , p. 175.

15.

Shih, C.H. , and Lee, L.J. , Effect of Fibre Architecture on Permeability in Liquid Composite Molding , Polym. Compos. 19(5), 629-639 (1998).