This paper presents a theoretical analysis of the tensile properties of plain weft-knitted fabric. Load-extension curves in the coursewise and walewise directions for fabrics made from glass fibers are theoretically calculated and compared with experimental results, and good agreement is obtained between them.
Get full access to this article
View all access options for this article.
References
1.
Araújo, M.D. , Hong, H., and Fangueiro, R., A Multiaxial Weft Knitted Technology for the Industrial Textiles, ITB Nonwovens Ind. Textiles1, 44 ( 1995).
2.
Chou, T.W., and Ko, Frank K. , "Textile StructuralComposites ," Elsevier Science Publishing Company, Inc., NY, 1989.
3.
Hepworth, B. , TheBiaxial Load-Extension Behaviour of a Model of Plain Weft Knitting, Part I , J. Textile Inst.4, 101 ( 1978).
4.
Hong, H., de Araújo, M.D., Fangueiro, R., Modeling of the Mechanical Behavior of Weft Knitted Fabrics for Composite Reinforcement, in "Proc. ICCE/7," July 2-8, Denver, CO, 2000, p. 335.
5.
Kawabata, S., Nonlinear Mechanics of Woven and Knitted Materials, ch. 3 in " Textile Structural Composites," T. W. Chou and F. K. Ko, Eds., Elsevier Science Publishing Company, Inc., NY, 1989, p. 359.
6.
Kawabata, S. , Theoretical Study on the Biaxial Tensile Properties of Knitted Fabrics, J. Textile Mach. Soc. Jpn.16, 216 (1970).
7.
Lau, K.W., and Dias, T., Knittability of High-modulus Yarns, J. Textile Inst.85, 173 (1994).
MacRory, B.M. , and McNamara, A.B., Knitted Fabrics Subjected to Biaxial Stress—An Experimental Study, Textile Res. J.37, 908 (1967).
10.
Mayer, J., et al., Weft Knitted Fabrics from Carbon Fibers: Reinforcement Structures for a New Class of Thermoplastic Composites, Melliand Eng.3, E39 (1995).
11.
Niwa, M., Kawabata, S., Nanashima, Y., and Kawai, K., Thoretical Study on the Biaxial Tensile Properties of Weft Knitted Fabrics , J. Textile Mach. Soc. Jpn.23, T120 ( 1970).
12.
Popper, P., TheTheoretical Behavior of a Knitted Fabric Subjected to Biaxial Stresses, Textile Res. J.36, 148 (1966).
13.
Postle, R., and Munden, D.L., Analysis of the Dry-Relaxed Knitted-Loop Configuration, Part I: Two-Dimensional Analysis, J. Textile Inst.58, 329 (1967).
14.
Ramarkrishana, S., and Hull, D., TensileBehaviour of Knitted Carbon-Fibre-Fabric/Epoxy Laminates, Part I: Experimental , Compos. Sci. Technol.50, 237, 247, 249-258 (1994).
15.
Raz, S., "The Karl Mayer Guide to TechnicalTextiles," Karl Mayer Textilmaschinenfabrik GmbH, Germany, 1988.
16.
Shanahan, W.J. , and Postle, R., A Theoretical Analysis of the Tensile Properties of Plain-Knitted Fabrics, Part I: The Load-Extension Curve for Fabric Extension Parallel to the Courses, Textile Res. J.65, 200 (1974).
17.
Whitney, J.M. , and Epting, J.L., Three-Dimensional Analysis of a Plain Knitted Fabric Subjected to Biaxial Stresses, Textile Res. J.36, 143 (1966).
18.
Wu, W.L. , Hamada, H., and Maekava, Z.I., Computer Simulation of the Deformation of Weft Knitted Fabrics for Composite Materials , J. Textile Inst.85, 199 (1994).
