Evaluating a One-Bath Process for Imparting Antimicrobial Activity and Repellency to Nonwoven Surgical Gown Fabrics

Abstract

A one-bath process to apply both antimicrobial and fluorochemical repellent finishes to nonwoven surgical gown fabrics is investigated in this study. The finishes are applied to two nonwovens: a polypropylene spunbonded/meltblown/spunbonded fabric and a wood pulp/polyester spunlaced fabric. Four different add-on levels of the finishes are applied to each fabric, resulting in sixteen finish combinations per fabric. Results show that both finishes are compatible for application in a one-bath process, and the antimicrobial and repellent properties are adequate with this process. Minimum chemical add-on levels of the antimicrobial and oil repellent finishes to achieve acceptable antimicrobial and repellent properties are determined for each fabric. The effectiveness of the antimicrobial finish is not affected by the repellent finish, but the effectiveness of the repellent finish varies with the add-on level of the antimicrobial finish.

Get full access to this article

View all access options for this article.

References

AATCC Technical Manual, American Association of Textile Chemists and Colorists , vol. 73, Research Triangle Park, NC, pp. 253-254, 186-188, 206-207, 1998.

Batra, S.K. , "The Nonwoven Fabrics Handbook," INDA, Cary, NC, 1992, pp. 19-22.

Brook, T.D. , Madigan, M.T. , Martinko, J.M. and Parker, J. , "Biology of Microorganisms," Prentice Hall, Englewood Cliffs, NJ, 1994, pp. 517-519.

Cho, J. , and Cho, G. , Effect of a Dual Function Finish Containing an Antibiotic and a Fluorochemical on the Antimicrobial Properties and Blood Repellency of Surgical Gown Materials , Textile Res. J., 67, 875-880 (1997).

Inda Standard Test Methods, Association of the Nonwoven Fabrics Industry, Cary, NC, pp. 73-74, 1995.

Ingraham, J. and Ingraham, C. , "Introduction to Microbiology," Wadsworth, Belmont, CA, 1995, pp. 220-223.

Lewin, M. , and Sello, S.B. , Handbook of Fiber Science and Technology: Chemical Processing of Fibers and Fabrics, Functional Finishes, vol. II, Part B, Marcel Decker , NY, 1984, pp. 144-210.

Olderman, J. , Surgical Nonwovens: Where Do We Go from Here , Nonwoven Ind. (10) 38-43 (1997).

Payne, J.D. , and Kudner, D.W. , A New Durable Antimicrobial Finish for Cotton Textiles, Am. Dyest. Rep. 85, 26-30, (1996).

10.

Potnis, P.S. , and Wadsworth, L.C. , A Comparison of Low Wet Pickup Techniques in the Repellent Finishing of Spunlaced nonwovens, Textile Chem. Color. 18 (11), 17-23 (1986).

11.

Timmons, T. , Kobylivke, P. , and Woon, L. , Microporous Melt Blown as Barrier Layer in SMS Composite, Int. Nonwoven J. 6 (1) 21-22 (1994).

12.

Tomasino, C. , "Finishing Technology and Chemistry of Textile Fabrics," North Carolina State University, Rayleigh, NC, 1992, pp. 164-171.