Numerical Drape Behavior of Circular Fabric Sheets Over Circular Pedestals

Abstract

Draping of circular fabric sheets over a circular pedestal is a typical large displacement/ rotation post-buckling deformation problem. Different deformed shapes or drape patterns may appear when repeating the same draping experiment for the same piece of fabric. This paper explores the possibility of using numerical techniques to reproduce this complicated but interesting fabric drape behavior. A recently developed geometrically nonlinear finite-volume method is deployed here in the numerical simulation. An initially flat circular fabric sheet is first subdivided into a number of structured finite volumes (or control volumes) by mesh lines along the warp and weft directions, resulting in rectan gular internal volumes and triangular or quadrilateral boundary volumes. Each control volume contains one grid node. The strains and curvatures and hence the out-of-plane bending and in-plane membrane strain energies of a typical volume can be evaluated using the global coordinates of its grid node and several neighbors surrounding it. The equi librium equations of the fabric sheet are derived by employing the principle of stationary total potential energy. The full Newton-Raphson iteration method with line searches is used to solve the nonlinear algebraic equations resulting from the formulation. Numerical results of two circular fabric pieces of different sizes and materials are presented. The predicted symmetrically deformed shape of the first fabric sheet is compared with existing experimental results, demonstrating good agreement between the two approaches. Several other asymmetrical drape patterns for each fabric sheet are presented, demonstrating that the proposed finite-volume method is capable of predicting not only the basic deformed shape of a circular fabric sheet, but also other possible drape patterns in a real experiment.

Get full access to this article

View all access options for this article.

References

Bathe, K.J. , "Finite Element Procedures," Prentice Hall, NJ , 1996.

Breen, D.E. , House, D.H. , and Wozny, M.J. , A Particle-Based Model for Simulating the Draping Behavior of Woven Cloth , Textile Res. J. 64 (11), 663-685 (1994).

Collier, R. , Collier, B.J. , Toole, G.O. , and Sargand, S.M. , Drape Prediction by Means of Finite-element Analysis, J. Textile Inst. 82 (1), 96-107 (1991).

Crisfield, M.A. , "Non-linear Finite Element Analysis of Solids and Structures, Vol. 1: Essentials," John Wiley & Sons, Chichester, U.K., 1991.

Gan, L. , Ly, N.G. , and Steven, G.P. , A Study of Fabric Deformation Using Nonlinear Finite Elements, Textile Res. J. 65 (11), 660-668 (1995).

Kang, T.J. , and Yu, W.R. , Drape Simulation of Woven Fabric by Using the Finite-element Method , J. Textile Inst. 86 (4), 635-648 (1995).

Kim, J. , Fabric Mechanics Analysis Using Large Deformation Orthotropic Shell Theory, Doctoral dissertation, North Carolina State University , Raleigh, NC, 1991.

Schnobrich, W.C. , and Pecknold , D.A. , The Lumped-parameter or Bar-node Model Approach to Thin Shell Analysis, in "Numerical and Computer Methods in Structural Mechanics," F. Perrone and R. Schnobrich, Eds., Academic Press, London, 1973, pp. 337-402.

Simo, J.C. , and Fox, D.D. , On a Stress Resultant Geometrically Exact Shell Model, Part I : Formulation and Parameterization, Comp. Methods-Appl. Mech. Eng . 72, 267-304 ( 1989).

10.

Simo, J.C. , Fox, D.D. , and Rifai, M.S. , On a Stress Resultant Geometrically Exact Shell Model, Part III: Aspects of Nonlinear Theory, Comp. Methods Appl. Mech. Eng. 79, 21-70 (1990).

11.

Stylios, G. , Wan, T.R. , and Powell, N.J. , Modeling the Dynamic Drape of Fabrics on Synthetic Humans, A Physical, Lumped-parameter Model, Int. J. Clothing Sci. Tech. 7(5), 10-25 (1995).

12.

Teng, J.G. , Buckling of Thin Shells: Recent Advances and Trends, Appl. Mech. Rev. ASME 49 (4), 263-274 (1996).

13.

Teng, J.G. , Chen, S.F. , and Hu, J.L. , A Finite-volume Method for Deformation Analysis of Woven Fabrics, Part I: Formulation, Int. J. Numer. Methods Eng. 46, 2061-2098 ( 1999).

14.

Teng, J.G. , and Rotter, J.M. Non-symmetric Bifurcation of Geometrically Non-linear Elastic-plastic Axisymmetric Shells Subject to Combined Loads Including Torsion, Computers Struct.32 (2). 453-477 (1989).

15.

Teng, J.G. , and Rotter, J.M. , Non-symmetric Buckling of Plate-end Pressure Vessels, J. Press. Vessel Technol. ASME 111 (3), 304-311 (1989).

16.

Terzopoulos, D. , Platt, J. , Barr , A. , and Fleischer, K. , Elastically Deformable Models, Computer Graph. 21 (4), 205-214 (1987).

17.

Weil, J. , The Synthesis of Cloth Objects, SIGGRAPH'86 ACM 20 (4), 49-54 (1986).