Detailed simulation of a real world job shop with subassembly requirements

Abstract

A highly-detailed model of a furniture manufacturing plant was constructed to evaluate the effects of various proposed changes and as a long term planning tool. As it turns out, this plant and model have many features of the general class of low- technology job shops with extensive subassembly: poor scheduling, bottlenecks, which are expensive to cure, and an inadequate knowledge of automation. Salient features of this study are the large size and complexity of the model and the diversity it contains. The plant seems to be typical of a low-technology job shop, and the model has the attribute of being about as realistic as can be expected of a simulation.

This paper presents the results of validat ing (matching) the plant and the simulation. Extensive studies which quantify the scheduling priorities are then presented, and some new measures of performance are suggested and evaluated. Further studies on bottleneck removal and adding automation clearly indicate the costs and benefits to the plant. All of these studies would seem to be quite typical of such plants.

Get full access to this article

View all access options for this article.

References

Townsend, M.A. , Lamb, T.W. , and Sheth, P.N. , "Creation of a Factory Simulation for a Low-Technology Industry," Manufacturing Review, Vol.1, No. 4, December 1988 , pp. 265- 274.

Lamb, T.W. , "Creation and Use of a Computer Simulation for a Manufacturing Facility in a Low-Technology Industry," M. Sc. Thesis, University of Virginia, 1989.

. Pegden, C.D. , "Introduction to Siman" Systems Modeling Corporation , State College, PA, 1983.

. Arumugam, V. , "Priority Sequencing in a Real World Job Shop ," SIMULATION, October 1985, pp. 176-186.

. Ashour, S. , and Vaswani, S.D. , "A GASP Simulation Study of Job-Shop Scheduling," SIMULATION, January 1972, pp. 1-7.

. Conway, R.W. , "Priority Dispatching and Work-in-Process Inventory in a Job Shop," Journal of Industrial Engineering, March-April 1965, pp. 123-130.

. Conway, R.W. , "Priority Dispatching and Job Lateness in a Job Shop," Journal of Industrial Engineering, July-August 1965, pp. 228-237.

. Cox, J.F. , Ledbetter, W.N. , and Smith, J.M. , "Simulation as an Aid to Corporate Decision-Making" SIMULATION, September 1977, pp.117-120.

. Eilon, S. , and Chowdhury, I.G. , and Serghiou, S.S. , "Experiments with the SI(X) Rule in Job-Shop Scheduling" SIMULATION, February 1975, pp. 45-48.

10.

Hood, G.A. , "Computer Simulation Applied to Shop Floor Scheduling and Control," ORSA/TIMS National Meeting, April 19-22, 1982.

11.

. Irastorza, J.C. , and Deane, R.H. , "A Loading and Balancing Methodology for Job Shop Control" AIIE Transactions, December 1974, pp. 302-307.

12.

. Kuzdrall, P.J. , Kwak, N.K. , and Schmitz, H.H. , "Simulating Space Requirements and Scheduling Policies in a Hospital Surgical Suite" SIMULATION, May 1981, pp. 163-171.

13.

LeGrande, E. , "The Development of a Factory Simulation Using Actual Operating Data," Management Technology, Vol. 13, No.1, 1963, pp. 1-19.

14.

Moodie, C.L. , and Roberts, S.D. , "Experiments with Priority Dispatching Rules in a Parallel Processor Shop," International Journal of Production Research, Vol. 6, No. 4,1968, pp. 303- 312.

15.

. Surh, D.S. , and Talavage, J.J. , "A GASP IV Model of Steel Ingot Processing ," SIMULATION, August 1977, pp. 49-55.

16.

. Law, A.M. , "Introduction to Simulation: A Powerful Tool for Analyzing Complex Manufacturing Systems" Industrial Engineering, Vol. 18, July 1986, pp. 46-63.