This paper presents a structured approach to modeling manufac turing systems. The structured approach is accomplished through a simulation assistant consisting of a set of predefined GPSS simulation macros, a user interface, and an automatic code generator.
" Addendum to the Simulation Software Catalog," 1987. Simulation, Vol. 48, No. 2, February, pp. 69-73.
2.
Brazier, M.K. and R.E. Shannon.1987. "Automatic Programming of AGVS Simulation Models," 1987 Winter Simulation Conference, Atlanta, GA, December, pp. 703 - 708.
3.
" Catalog of Simulation Software," 1986. Simulation , Vol. 47, No. 4, October, pp. 152-165.
4.
Church, J.1982. "Simulation Aspects of Flexible Manufacturing Systems Designs and Analysis," Proceedings of 1982 Fall Industrial Engineering Conference, Atlanta, GA, pp. 426-431.
5.
Conway, R. and W. Maxwell.1986. "XCELL: A Cellular, Graphical Factory Modeling System," 1986 W inter Simulation Conference , Washington D.C., December, pp. 160-163.
6.
Endesfelder, T. and H. Tempelmeier.1987. "A Flexible Software Tool for the Generation of SIMAN Simulation Models", Proceedings of the European Simulation Multiconference, Vienna, Austria, July.
7.
Ford, D.R. and B.J. Schroer.1987. "An Expert Manufacturing Simulation System." Simulation, Vol. 48, No. 5, pp. 193-200.
Haddock, J. and R.P. Davis.1985. "Building a Simulation Generator for Manufacturing Cell Design and Control." Annual International Industrial Engineering Spring Conference Proceedings, Los Angeles, CA, May, pp. 237-244.
10.
Heidorn, G.E.1974. "English as a Very High Level Language for Simulation Programming." SIGPLAN Notices, Vol. 9, No. 4, pp. 91-100.
11.
Khoshnevis, B. and A.P. Chen.1986. "An Expert Simulation Model Builder." Intelligent Simulation Environment, Society for Computer Simulation, Vol. 17, No. 1, pp. 129-132.
12.
Pedgen, C. Dennis.1985. Introduction to SIMAN, Systems Modeling Corp., College Station, PA.
13.
Schroer, B.J., F.T. Tseng and W.S. Dwan.1988. A Simulation Assistant for Modeling Manufacturing Systems, University of Alabama in Huntsville , Research Report No. 659, January.
14.
Schroer, B.J.1988. A Simulation Model of a Manufacturing Cell, University of Alabama in Huntsville, Report No. 676, April.
15.
Schroer, B.J.1988. A Simulation Model of an Assembly Line, University of Alabama in Huntsville, Report No. 696, June.
16.
Shannon, R.E., R. Mayer and H.H. Adelsberger .1985. "Expert Systems and Simulation ." Simulation, Vol. 44, No. 6, pp. 257-284.
17.
SIMPLE-1 User's Guide and Reference Manual, 1985. Sierra Simulations and Software, Campbell, CA.
