The Receiver Design Modeling (RDM) simulator can construct a model to simulate receiver architecture. It has been used to model receivers such as the crystal video, superheterodyne, chan nelized, compressive microscan, instantaneous frequency mea surement (IFM), and Bragg cell. Example receiver simulation re sults are presented for the first four of these types.
RDM is implemented on a VAX 11/780 and written in FOR TRAN 77 using the VMS operating system.
Allen, K.J. and J.B. Tsui.1985."Automated Testing Speeds EW Receiver Evolution." Microwaves BRF Journal (March): 113-118.
2.
Blackman, N.M.1976. "The Effects of Noise Upon Polar-Display Instantaneous Frequency Measurement." IEEE Transactions on Instrumentation and MeasurementIM-25, no. 3 (September): 214-221.
3.
Fox, R.L. and PA Neyens.1986a. "The Development of a Microwave Receiver Design Modeling Simulator." In Supplementary Proceedings of the Eastern Simulation Conference (Norfolk, Va., March 10-12). SCS, San Diego, Calif., 125-128.
4.
Fox, R.F. and P.A. Neyens.1986b. "The Modeling of a Bragg Cell Device and Its Application in an Acousto-Optic Microwave Receiver." In Proceedings of the 1986 Summer Simulation Conference ( Reno, Nev., July 23-30). SCS, San Diego, Calif., 259-262.
5.
Harms, B.K. and D.R. Hummels.1985. "Calculation of Detection Probability for Frequency Compressive Receivers." IEEE Transactions on Aerospace and Electronic SystemsAES-21, no. 1 (January): 106-116.
6.
Nauda, A. and S.R. Holderman.1984."An Interactive Simulator for Signal Processing System Design." In Proceedings of the 1984 Summer Simulation Conference, Vol. 1 (Boston, Mass., July 23-25). SCS, San Diego, Calif., 386-390.
7.
Tsui, J.B.1981."Tangential Sensitivity of EW Receivers." Microwave Journal (October) : 99-102.
8.
Tsui, J.B.1983. "Microwave Receivers and Related Components."Technical Report PB84-108711. National Technical Information Service, Springfield, Va.
