Molecular dynamics simulation is used to study water molecular ejection through a 27.5-Å-diameter nozzle aperture under various system temperatures and pressing forces. In simulations, the effects of system temperature on the separation of water droplets from the nozzle plate surface are investigated. The results showed that the water nanojet did not separate from the nozzle plate surface at the system temperature of 310 K used to produce the nanoscale water droplets, regardless of the pressing forces. In addition, the impingement of nanoscale water droplets onto a fixed plate surface is also expressed. The contact angle, width of the spreading droplet, and average pressure of the droplets on the plate surface are discussed.
GansBJDDuiubertPCSchubertUS.Inkjet printing of polymers: state of the art and future developments. Adv Mater2004; 16: 203–213.
5.
KondicLDiezJARackPD. Nanoparticle assembly via the dewetting of patterned thin metal lines: Understanding the instability mechanisms. Phys Rev E2009; 79: 026302.
6.
SteinertCPGoutierIGutmannO. A highly parallel picoliter dispenser with an integrated, novel capillary channel structure. Sens Actuators A2004; 116: 171–177.
7.
IbrahimMOtsuboTNaraharaH. Inkjet printing resolution study for multi-material rapid prototyping. JSME Int J Ser C2006; 49: 353–360.
8.
ParkSMHuhYSCraigheadHG. A method for nanofluidic device prototyping using elastomeric collapse. Proc Natl Acad Sci PNAS2009; 106: 15549–15554.
9.
DuanCWangWXieQ.Fabrication of nanofluidic devices. Biomicrofluidics2013; 7: 026501.
10.
BiehlSDanzebrinkROliveiraP. Refractive microlens fabrication by ink-jet process. J Sol Gel Sci Technol1998; 13: 177–182.
11.
GopanNSathianSP.A Langevin dynamics study of nanojets. J Mol Liq2014; 200: 246–258.
12.
Droplet formation and breakup dynamics in microfluidic flow-focusing devices: from dripping to jetting. Chem Eng Sci2012; 84: 207–217.
13.
LinCTKuoJKYenTH.Three-dimensional molecular dynamics study of aperture shape effect on nanojet ejection. J Chin Inst Eng2011; 34: 1001–1011.
14.
EggersJ.Dynamics of liquid nanojets. Phys Rev Lett2002; 89: 084502.
15.
FangTHChangWJLinSL.Effects of temperature and velocity of droplet ejection process of simulated nanojets onto a moving plate’s surface. Appl Surf Sci2006; 253: 1649–1654.
16.
HwangCCJengYRHsuYL. Molecular dynamics simulation of microscopic droplet spread on rough surfaces. J Phys Soc Jpn2001; 70: 2626–2632.
17.
KumarAGuS.Modeling impingement of hollow metal droplets onto a flat surface. Int J Heat Fluid Flow2012; 37: 189–195.
18.
MuradSPuriIK.Dynamics of nanoscale jet formation and impingement on flat surfaces. Phys Fluids2007; 19: 128102.
19.
BalasubramanianGPuriIKRagabSA.Dynamics of impinging nanoscale jets. Chem Phys Lett2010; 491: 177–182.
20.
LiYYangGQZhangJP. Numerical studies of bubble formation dynamics in gas-liquid-solid fluidization at high pressures. Powder Technol2001; 116: 246–260.
21.
LiQLiuC.Molecular dynamics simulation of heat transfer with effects of fluid-lattice interactions. Int J Heat Mass Transfer2012; 55: 8088–8092.
22.
ManzelloSLYangJC.An experimental investigation of water droplet impingement on a heated wax surface. Int J Heat Mass Transfer2004; 47: 1701–1709.
23.
DaliliAChandraSMostaghimiJ. Formation of liquid sheets by deposition of droplets on a surface. J Colloid Interface Sci2014; 418: 292–299.
24.
LinJW.Studying on water nanojet ejection and the wetting phenomena on the nozzle surface. Microfluid Nanofluid2012; 13: 37–48.
25.
LevittMHirshbergMSharonR. Calibration and testing of a water model for simulation of the molecular dynamics of proteins and nucleic acids in solution. J Phys Chem. B1997; 101: 5051–5061.
26.
DaiCFChangRY.Molecular dynamics simulation of formation and control of nanodroplets in piezoelectric nanoejection systems. Mol Simul2010; 36: 847–855.
27.
FangTHChangWJLiaoSC.Effects of temperature and aperture size on nanojet ejection process by molecular dynamics simulation. Microelectron J2004; 35: 687–691.
28.
LinJWChuSX.Molecular dynamics simulation of nanoscale water jet. In: ASME 2008 first international conference on micro/nanoscale heat transfer, parts A and B Taiwan, Taiwan, 6–9 January 2008, paper No. MNHT2008-52044, pp.519–524.
29.
FangTHChangWJLiaoSC.Simulated nanojet ejection process by spreading droplets on a solid surface. J Phys Condens Matter2003; 15: 8263–8270.
