Diagnostic accuracies of CTs,X-rays and Lodox to detect blunt force trauma in adults,using a pig model

Abstract

The accurate radiological detection of skeletal trauma is crucial for the investigation of blunt force trauma (BFT) cases. The sensitivities of CTs, X-rays and Lodox in identifying BFT fractures and minimum number of impacts in pigs, used as proxies for adult humans, were assessed. Ten human sized pig carcasses were struck with a mallet and scanned, after which the number of fractures and minimum number of impacts detected radiologically were recorded. Pig carcasses were then macerated, and the defleshed, skeletonized remains were considered the gold standard as far as number and location of fractures were concerned. CTs were most sensitive in identifying fractures and impacts in all body regions, with overall sensitivities of 55.4% and 71.5% respectively, while X-rays and Lodox had sensitivities of 25.8% and 29.3% for fractures, and 43.5% and 41.1% for impacts, respectively. All modalities were highly specific for identifying fractures (CT: 99.1%; X-ray: 98.9%; Lodox: 99.4%). CTs should be used to analyze blunt force trauma when a radiological assessment is required, but an examination of the defleshed bones remains the gold standard for the deceased whenever feasible. X-rays and Lodox have limited diagnostic value in these cases and relying on them to detect fractures may compromise the accurate forensic investigation of blunt trauma victims. However, the use of Lodox for initial screening of major trauma is still of value. Sensitivities are generally higher for detecting fractures in pigs compared to piglets, indicating that increased diagnostic value is achieved when imaging pigs compared to piglets.