Loading of a Unilateral Temporomandibular Joint Prosthesis: A Three-dimensional Mathematical Study

Abstract

The load on the prosthetic side and the influence of the design on the remaining natural contralateral TMJ must be known before a unilateral temporomandibular joint (TMJ) prosthesis can be developed. The aim of the present study was to determine the maximum loading of the TMJ prosthetic side and the natural contralateral TMJ and to investigate the influence of the location of the center of rotation of the prosthesis on the maximum loading. For this purpose, a mathematical model of the mandible with a unilateral TMJ prosthesis with a fixed center of rotation (CR) was developed. The location of the CR of the TMJ prosthesis was varied from the middle of the natural mandibular condyle to 15 mm inferior to this location. Although the maximum joint reaction forces changed as a result of a unilateral TMJ prosthesis, the trend of the loading curves was similar to that of an intact mandible. A unilateral TMJ prosthesis resulted in a 50% higher loading of the prosthetic side, while the load on the natural contralateral TMJ remained within normal limits. The maximum load on the prosthetic side occurred during molar bites and could reach 100 N in the cranial direction, 30 N in the ventral direction, and 25 N in the medio-lateral direction. The location of the CR did not have a significant influence on the loading of the TMJ prosthesis and the natural contralateral TMJ. Key words: temporomandibular joint, temporomandibular joint prosthesis, models, biomechanics, bite force, computer simulation.

Get full access to this article

View all access options for this article.

References

Ahlgren J. , Owall B. (1970). The muscular activity and chewing force: a polygraphic study of human mandibular movements. Arch Oral Biol 15:271-280.

Baragar FA , Osborn JW (1987). Efficiency as predictor of human jaw design in the sagittal plane. J Biomechanics 20:447-457.

Craig RG (1985). Restorative dental materials. 7th ed. St Louis: C.V. Mosby.

Gibbs CH , Mahan PE , Lundeen HC , Brehnan K. , Walsh EK , Sinkewiz SL , et al. (1981). Occlusal forces during chewing-influences of biting strength and food consistency. J Prosthet Dent 46:561-567.

Hylander WL (1975). The human mandible: lever or link? Am J Phys Anthropol 43:227-242.

Koolstra JH, van Eijden TM (1992). Application and validation of a three-dimensional mathematical model of the human masticatory system in vivo. J Biomechanics 25:175-187. Koolstra JH, van Eijden TM, Weijs WA, Naeije M (1988). A three-dimensional mathematical model of the human masticatory system predicting maximum possible bite forces. J Biomechanics 21:563-576.

Mansour RM , Reynik RJ (1975). In vivo occlusal forces and moments: I. Forces measured in terminal hinge position and associated moments. J Dent Res 54:114-120.

McMinn Rmh , Hutchings RT (1977). Color atlas of human anatomy. 1sted. Chicago: Year Book Medical Publishers, Inc.

Møller E. (1966). The chewing apparatus: an electromyographic study of the action of the muscles of mastication and its correlation to facial morphology. Acta Physiol Scand 69(Suppl):1-150.

10.

Osborn JW , Baragar FA (1985). Predicted pattern of human muscle activity during clenching derived from a computer assisted model: symmetric vertical bite forces. J Biomechanics 18:599-612.

11.

Ow RK , Carlsson GE , Jemt T. ( 1989). Biting forces in patients with craniomandibular disorders . Cranio 7:119-125.

12.

Proffit WR, Fields HW, Nixon WL (1983). Occlusal forces in normal and long-faced adults. J Dent Res 62:566-571. Pruim GJ, ten Bosch JJ, de Jongh HJ (1978). Jaw muscle EMGactivity and static loading of the mandible. J Biomechanics 11:389-395.

13.

Pruim GJ , ten Bosch JJ , de Jongh HJ (1980). Forces acting on the mandible during bilateral static bite at different force levels. J Biomechanics 13:755-763.

14.

Rozema FR , Otten E. , Bos RR , Boering G. , van Willigen JD (1992). Computer aided optimization of choice and positioning of bone plates and screws used for internal fixation of mandibular fractures . Int J Oral Maxillofac Surg 21:373-377.

15.

Smith DM , McLachlan KR , McCall WD Jr (1986). A numerical model of temporomandibular joint loading . J Dent Res 65:1046-1052.

16.

Throckmorton GS (1985). Quantitative calculations of temporomandibular joint reaction forces. II: The importance of the direction of the jaw muscle forces. J Biomechanics 18:453-461.

17.

van Eijden TM , Koolstra JH , Brugman P. , Weijs WA (1988). A feedback method to determine the three-dimensional bite-force capabilities of the human masticatory system. J Dent Res 67:450-454.

18.

van Loon J. -P, de Bont GM , Boering G. (1995). Evaluation of temporomandibular joint prostheses. Review of the literature from 1946 to 1994 and implications for future prosthesis designs. J Oral Maxillofac Surg 53:984-996.

19.

van Loon J-P, Falkenstrom CH, de Bont LGM, Verkerke GJ, Stein AC, Stegenga B (1998). The optimal center of rotation for a temporomandibular joint prosthesis. A three-dimensional kinematical study. J Dent Res (accepted). Weijs WA, Hillen B (1985). Cross-sectional areas and estimated intrinsic strength of the human jaw muscles. Acta Morphol Neerl Scand 23:267-274.