Crack Propagation Directions in Unfilled Resins

Abstract

Posterior composite restorative materials undergo accelerated wear in the occlusal contact area, primarily through a fatigue mechanism. To facilitate the timely development of new and improved materials, a predictive wear model is desirable. The objective of this study was to develop a finite element model enabling investigators to predict crack propagation directions in resins used as the matrix material in composites, and to verify these predictions by observing cracks formed during the pin-on-disc wear of a 60:40 BISGMA:TEGDMA resin and an EBPADMA resin. Laser confocal scanning microscopy was used to measure crack locations. Finite element studies were done by means of ABAQUS software, modeling a cylinder sliding on a material with pre-existing surface-breaking cracks. Variables included modulus, cylinder/material friction coefficient, crack face friction, and yield behavior. Experimental results were surprising, since most crack directions were opposite previously published observations. The majority of surface cracks, though initially orthogonal to the surface, changed direction to run 20 to 30° from the horizontal in the direction of indenter movement. Finite element modeling established the importance of subsurface shear stresses, since calculations provided evidence that cracks propagate in the direction of maximum K_II(θ), in the same direction as the motion of the indenter, and at an angle of approximately 20°. These findings provide the foundation for a predictive model of sliding wear in unfilled glassy resins.

Keywords

cracks resins composites modeling finite element.

Get full access to this article

View all access options for this article.

References

Anderson TL (1995). Fracture mechanics. 2nd ed. Boca Raton, FL: CRC Press Inc.

Barsoum RS (1976). On the use of isoparametric finite elements in linear fracture mechanics. Int J Numer Meth Eng 10:25-37.

Drucker DC , Prager W. (1952). Soil mechanics and plastic analysis or limit design . Q Appl Math 10:157-165.

Dubourg MC , Villechaise B. (1992). Analysis of multiple fatigue cracks-Part I: Theory . J Tribology 114:455-461.

Dubourg MC , Godet M. , Villechaise B. (1992). Analysis of multiple fatigue cracks-Part II: Results . J Tribology 114:462-468.

Eberhardt AW , Peri S. ( 1995). A vertical surface breaking crack in normal and sliding joint contact. J Biomech Eng 117:153-155.

Ghosn LJ (1988). Analysis of crack propagation in roller bearings using the boundary integral equation -A mixed mode loading problem. Trans AIME J Tribology 110:408-413.

Hibbitt, Karlsson , Sorensen, Inc. (1994). ABAQUS v. 5.4. Providence, Rhode Island.

Johnson KL (1995). Contact mechanics and the wear of metals. Wear 190:162-170.

10.

Keer LM , Bryant MD , Haritos GK (1982). Subsurface and surface cracking due to Hertzian contact. ASME J Lubrication Tech 104:347-351.

11.

Lawn BR ( 1993). Fracture of brittle solids. 2nd ed. Cambridge, England: Cambridge University Press.

12.

Lawn BR , Wilshaw TR (1975). Indentation fracture: principles and applications . J Mater Sci 10:1049-1081.

13.

Lawn BR , Wiederhorn SM , Roberts DE (1984). Effect of sliding friction forces on the strength of brittle materials. J Mater Sci 19:2561-2569.

14.

Lutz F. , Phillips RW , Roulet JF , Setcos JC (1984). In vivo and in vitro wear of potential posterior composites. J Dent Res 63:914-920.

15.

McKinney JE , Wu W. (1982). Relationship between subsurface damage and wear of dental restorative composites. J Dent Res 61:1083-1088.

16.

Minitab, Inc. (1994). Minitab Release 10. State College, PA: Minitab, Inc.

17.

Mouginot R. (1987). Crack formation beneath sliding spherical punches . J Mater Sci 22:989-1000.

18.

Padture NP , Lawn BR ( 1994). Toughness properties of a silicon carbide with an in situ induced heterogeneous grain structure. J Am Ceram Soc 77:2518-2522.

19.

Roesler FC (1956). Brittle fractures near equilibrium. Proc Phys Soc Lond 69(B):981-992.

20.

Roulet JF (1987). Mechanisms of degradation. In: Degradation of dental polymers. Basel: Karger, pp. 60-90.

21.

Sadeghipour K. , Baran GR , Fu Z. , Jayaraman S. (1996). Finite element modeling of crack propagation in elastic-plastic media. Part 1: Vertical surface breaking cracks. J Mater Sci 31:3167-3172.

22.

Salehizadeh H. , Saka N. ( 1992). Crack propagation in rolling line contacts. Trans AIME J Tribology 114:690-697.

23.

Shin WS , Li XF , Schwartz B. , Wunder SL , Baran GR (1993). Determination of the degree of cure of dental resins using Raman and FT-Raman spectroscopy. J Dent Res 9:317-324.

24.

Taylor DF , Bayne SC , Leinfelder KF , Davis S. , Koch GG ( 1994). Pooling of long-term clinical wear data for posterior composites. Am J Dent 7:167-174.

25.

Truong VT , Tyas MJ ( 1988). Prediction of in vivo wear in posterior composite resins: a fracture mechanics approach. Dent Mater 4:318-327.

26.

Truong VT , Cock DJ , Padmanathan M. (1990). Fatigue crack propagation in posterior dental composites and prediction of clinical wear. J Appl Biomater 1:21-30.

27.

van der Varst Pgt , Lemmens Plm , Peters MC , Plasschaert AJ (1991). Estimation of the mechanical lifetime of dental restorations: method and preliminary results. J Biomechan 24:341-347.

28.

van der Varst Pgt , Brekelmans WA , de Vree JH , de Groot R. (1993). Mechanical performance of a dental composite: probabilistic failure prediction. J Dent Res 72:1249-1256.

29.

Willems G, Lambrechts P, Braem M, Vanherle G (1993). Three-year follow-up of five posterior composites: in vivo wear. J Dent 21:74-78. Zienkiewicz OC, Emsom C, Bettess P (1983). A novel boundary infinite element. Int J Numer Meth Eng 19:393-404.