Edge-losses occur during reflectance measurements of pigmented maxillofacial elastomer when light is scattered within a sample beyond that part of the surface exposed to the observation system of the optical device. A custom sample-holder is presented which redirects light that would not be measured during conventional reflectance measurement back into the sample. The amount of edge-loss occurring within thin layers of maxillofacial elastomer with tan pigment on black-and-white backings was found to depend on sample thickness, the backing, the beam size used during conventional reflectance measurement, and the optical term bS = (2KS + K2)1/2. Data analysis revealed a significant interaction among these four factors. Additionally, the edge-loss occurring during the tristimulus reflectance measurement of thick samples of maxillofacial elastomer with various concentrations of tan and black pigment was found to be linearly related to bS up to a limiting value, with no additional edge-loss occurring for bS values above this limiting value. Edge-loss is an important consideration during the matching of the optical characteristics of pigmented maxillofacial material to those of human skin.
Beumer J., Zlotolow I. (1979). Restoration of facial defects: etiology, disability, and rehabilitation. In: Maxillofacial rehabilitation: prosthodontic and surgical considerations. Beumer J, Curtis TA, Firtell DN , editors. St. Louis: C.V. Mosby , pp. 328-340.
2.
Bolt RA, ten Bosch JJ, Coops JC (1994). Influence of window size in small-window color measurement, particularly of teeth.
3.
Phys Med Biol39:1133-1142.
4.
Commission Internationale de l'Eclairage ( 1971). Colorimetry, official recommendations of the International Commission on Illumination. Publication CIE No. 15 (E-1.3.1). Paris, France: Bureau Central de la CIE.
5.
Davis BK, Johnston WM, Saba RF ( 1994). Kubelka-Munk reflectance theory applied to porcelain veneer systems using a colorimeter. Int J Prosthodont7:227-233.
6.
Dawson JB, Barker DJ, Ellis DJ, Grassam E., Cotterill JA, Fisher GW, et al. (1980). A theoretical and experimental study of light absorption and scattering by in vivo skin. Phys Med Biol25:695-709.
7.
Duntley SQ (1942). The optical properties of diffusing materials . J Optic Soc Am32:61-70.
8.
Fine L. ( 1978). Color and its application in maxillofacial prosthetics . J Prosthet Dent39:188-192.
9.
Hesse NS (1993). Concentration additivity of optical coefficients for pigment mixtures in maxillofacial elastomer (thesis). Columbus, OH: Ohio State University.
10.
Hesse NS, Johnston WM, Kienle BH (1993). Additivity of optical coefficients for pigment mixtures in maxillofacial elastomer (abstract). J Dent Res72:198.
11.
Hsia JJ ( 1976). The translucent blurring effect-Method of evaluation and estimation. NBS Technical Note 594-12. Washington, DC: US Dept. of Commerce, National Bureau of Standards .
12.
Ishikawa-Nagai S., Sato R., Furukawa K., Ishibashi K. (1992). Using a computer color-matching system in color reproduction of porcelain restorations. Part 1: Application of CCM to the opaque layer. Int J Prosthodont5:495-502. Ishikawa-Nagai S., Sawafuji F., Tsuchitoi H., Sato RR, Ishibashi K. (1993). Using a computer color-matching system in color reproduction of porcelain restorations, Part 2: Color reproduction of stratiform-layered porcelain samples. Int J Prosthodont6:522-527.
13.
Johnston WM, Hesse NS (1990). Limitations of Kubelka-Munk theory applied to pigmented maxillofacial elastomer (abstract). J Dent Res69:364.
14.
Johnston WM, Kao EC (1989). Assessment of appearance match by visual observations and clinical colorimetry. J Dent Res68:819-822.
15.
Johnston WM, O'Brien WJ, Tien T.-Y (1986a). The determination of optical absorption and scattering in translucent porcelain. Color Res Appl11:125-130.
16.
Johnston WM, O'Brien WJ, Tien T.-Y (1986b). Concentration additivity of Kubelka-Munk optical coefficients of porcelain mixtures. Color Res Appl11:131-137.
17.
Johnston WM, Hesse NS, Weng C.-S (1991). Improvement in accuracy of Kubelka-Munk theory for polymeric prosthetic materials (abstract). J Dent Res70:569.
18.
Johnston WM, Hesse NS, Kienle BH (1992). Predicting spectral reflectance of human skin from colorimetric measurements (abstract). J Dent Res71:302.
19.
Johnston WM, Hesse NS, Kienle BH (1994). Colorant formulation of maxillofacial elastomer (abstract). J Dent Res73:389. Judd DB (1942). Fresnel reflection of diffuse incident light. Natl Bur Stds J Res29:329-332.
20.
Judd DB, Wyszecki G. (1975). Color in business, science and industry. 3rd ed. New York: John Wiley & Sons.
21.
Kienle BH, Johnston WM, Hesse NS (1994). Human visual
22.
evaluation of colorant-formulated maxillofacial material (abstract). J Dent Res73:124.
23.
Kubelka P. (1948). New contributions to the optics of intensely light-scattering materials. Part I. J Opt Soc Am38:488-457. Kuehni RG (1975). Computer colorant formulation. Lexington, MA: Lexington Books, pp. 1-39.
24.
Ma T. (1992). Clinical overview of materials for extraoral maxillofacial prosthetics. In: Proceedings of the conference on materials research in maxillofacial prosthetics. Setcos JC, editor. Trans Acad Dent Mater5:9-24.
25.
Ma T., Johnston WM, Koran A. III (1987). The color accuracy of the Kubelka-Munk theory for various colorants in maxillofacial prosthetic material. J Dent Res66:1438-1444. Ma T., Hicken SC, Buchanan CR, DeBoie RG (1988). Chairside color verification for facial prosthesesJ Prosthet Dent60:219-221.
26.
Rommerdale EH (1992). Innovation needed in extra oral maxillofacial materials. In: Proceedings of the conference on materials research in maxillofacial prosthetics. Setcos JC , editor. Trans Acad Dent Mater5:41-62.
27.
Rugh ER, Johnston WM, Hesse NS (1991). The relationship between elastomer opacity, colorimeter beam size and measured colorimetric response. Int J Prosthodont4:569-576. Saunderson JL (1942). Calculation of the color of pigmented plastics. J Optic Soc Am32:727-736.
28.
Seghi RR, Johnston WM, O'Brien WJ (1989). Performance assessment of colorimetric devices on dental porcelains. J Dent Res68:1755-1759.
29.
Woolsey GD, Johnston WM, O'Brien WJ (1984). Masking power of dental opaque porcelains (erratum in J Dent Res63:1115, 1984). J Dent Res63:936-939.
