The Influence of Polyacid Molecular Weight on Some Properties of Glass-ionomer Cements

Abstract

The influence of the molecular weight of the poly(acrylic acid) component on some properties of glass-ionomer cement has been investigated. The results can be explained by treatment of glass-ionomer cements as thermoplastic composites. Many of the concepts of polymer science can be applied successfully in a qualitative way to these cements, including the ideas of entanglements and reptation. Molecular weight of the polyacid had a pronounced influence on setting rate, acid erosion rate, toughness, fracture toughness, and wear resistance. The chain length of the polyacid was found to be an important parameter in formulation of a cement, and the higher the molecular weight, the better the properties. However, in practice the molecular weight is limited by viscosity, and some balance has to be achieved among concentration, molecular weight, and viscosity.

Get full access to this article

View all access options for this article.

References

Alison, P.J. ; Stroud, M.F. ; and William, H. (1965): Lubrication and Wear, 3rd Convention, Proc Inst Mech Engrs 179 (3J):246-250.

Beham, G. (1976): Laboratory report: Versuchsbericht betr. in vitro Bestimmung der Säurelöslichkeit verschiedener Materialen. Vivadent, Liechtenstein.

Bovis, S.C. ; Harrington, E. ; and Wilson, H.J. (1971): Setting Characteristics of Composite Filling Materials , Br Dent J 131:352-356.

Brown, W.F. and Srawley, J.E. (1965): Plane Strain Crack Toughness Testing of High Strength Metallic Materials. In: ASTM STP, Vol. 13, Philadelphia: p. 410.

Crisp, S. ; Abel, G. ; and Wilson, A.D. (1971): Characterisation of Glass-ionomer Cements. 4. Effect of Molecular Weight on Physical Properties, J Dent 5:117-120.

DE GENNES, P.G. (1979 ): Scaling Concepts in Polymer Physics. Ithaca, New York: Cornell University Press.

Doi, M. and Edwards, S.F. (1978): Dynamics of Concentrated Polymer Systems. Part 1. Brownian Motion in the Equilibrium State , J Chem Soc Faraday Trans 2:1789-1801.

Edwards, S.F. (1967): Statistical Mechanics of Polymerized Material , Proc Phys Soc London 92:9-16.

Gonzalez, A.E. (1984): Viscoelasticity of Ionomer Gels. 2. The Elastic Moduli, Polymer 25:1469-1474.

10.

Harrison, A. and Lewis, T.T. (1975): The Development of an Abrasion Testing Machine for Testing Dental Materials, J Biomed Mater Res 9:341-353.

11.

Hill, R.G. ; Wilson, A.D. ; and Warrens, C.P. (1988): The Influence of Polyacrylic Acid Molecular Weight on the Fracture of Glass-ionomer Cements, J Mater Sci (in press).

12.

Hodd, K.A. and Reader, M.J. (1984): Interfacial Properties of lonomer Cements and their Effects Upon Mechanical Performance, Adhesion (London) 8:153-167.

13.

Kausch, H.H. and Jud, K. (1982): Molecular Aspects of Crack Formation and Healing in Glassy Polymers, Plast Rubber Proc Appl 2:265-268.

14.

Kies, J.A. and Clarke, B.J. (1969): Fracture. P.L. Pratt , Ed., London: Chapman and Hall, pp. 483-491.

15.

Klein, J. and Briscoe, B.J. (1977): Diffusion of Long Molecules Through Solid Polyethylene. II. Measurements and Results, J Polym Sci Polym Phys Ed 15 :2065-2074.

16.

Kragelskii, I.V. (1966): Friction and Wear of Materials. London: John Wiley and Sons.

17.

Prentice, P. (1985): The Influence of Molecular Weight on the Fracture of Thermoplastic Glassy Polymers, J Mat Sci 20:1445-1454.

18.

Prosser, H.J. ; Powis, D.R. ; and Wilson, A.D. (1986): Glass-ionomer Cements of Improved Flexural Strength , J Biomed Res 65:146-148.

19.

Read, M.J. (1981): The Mechanical and Other Properties of lonomer Cements, PhD Thesis. University of Brunel, London.

20.

Williams, D.P. and Evans, A.G. (1973): Method for Studying Slow Crack Growth, J Test Eval 264-270.

21.

Wilson, A.D. ; Crisp, S. ; and Ferner, A.J. (1976): Reactions in Glass-Ionomer Cements. IV. Effect of Chelating Comonomers on Setting Behaviour, J Dent Res 55:489-495.

22.

Wilson, A.D. ; Groffman, D.M. ; Powis, D.R. ; and Scott, R.P. (1986): An Evaluation of the Significance of the Impinging Jet Method for Measuring the Acid Erosion of Dental Cements, Biomaterials 7:55-60.

23.

Young, R.J. (1983): Introduction to Polymers. London: Chapman and Hall, p. 105.