Abstract
A gas-liquid chromatography assay has been developed for the estimation of methyl methacrylate monomer (MMA) in whole saliva, with a lower limit of detection in the order of 1μg/mL. Healthy human dentate subjects wore recently made autopolymerized or heat-polymerized polymethyl methacrylate (PMMA) palatal appliances. MMA released into saliva was detected for up to one week after insertion of autopolymerized appliances, with a maximum concentration of 45 μg/mL in whole saliva or 180 μg/mL in the salivary film on the fitting surface. The MMA was not detected in blood or urine. MMA was also present in the saliva of volunteers wearing appliances which had been heat-polymerized at 70°C for one hr but not cured at 70°C for three hr. The maximum amount of monomer released by an autopolymerized base plate was 29.5 μg in the first hour, which, while not a toxic or primary irritant dose, could possibly sensitize patients or elicit an allergic reaction. For minimization of monomer release, autopolymerized appliances should be immersed for 24 hr in water before being worn.
Get full access to this article
View all access options for this article.