Sage Journals: Discover world-class research

Abstract

A radiotracer technique was used to study silver and gold diffusion into dental porcelain under experimental conditions close to the real conditions in prosthetic laboratories for porcelain bakes. It was clearly shown that these non-oxidizable elements were able to diffuse into the ceramic as well as oxidizable ones. The penetration depth varied widely according to the element. The ratio D_Ag/D_A _u was about 10³ around 850°C. In contrast to gold, the silver diffusion rate was high enough to allow silver, from the metallic alloy, to be present at the external ceramic surface after diffusion into the ceramic. Hence, the greening of dental porcelains baked on silver-rich alloys could be explained mainly by a solid-state diffusion mechanism.

Get full access to this article

View all access options for this article.

References

Adda, J. and Philibert, J. (1966): La Diffusion dans les Sol-ides, Instn , Ed., Paris: Presses Universitaires de France, pp. 135-231.

Anusavice, K.J. ; Horner, J.A. ; and Fairhurst, C.W. (1977a): Adherence Controlling Elements in Ceramic-Metal Systems. I-Precious Alloys, J Dent Res 56:1045-1052.

Anusavice, K.J. ; Ringle, R.D. ; and Fairhurst, C.W. (1977b): Adherence Controlling Elements in Ceramic Metal Systems. II-Non Precious Alloys, J Dent Res 56:1053-1061.

Badrour, L. ; Moya, E.G. ; Bernardini, J. ; and Moya, F. (1986): Bulk Diffusion of 110Ag Tracer in Al203, Scripta Met 20:1217-1222.

Doremus, R.H. (1965): Optical Properties of Small Silver Particles, J Chem Phys 42:414--417.

Lautenschlager, E.P. ; Greener, E.H. ; and Elkington, W.E. (1969): Microprobe Analyses of Gold-Porcelain Bonding , J Dent Res 48:1206-1210.

Leymonie, C. and Lacombe, P. (1959): Methodes d'Etude de l'Autodiffusion dans les Metaux a l'Aide des Radioisotopes, Int J Appl Radiat Isot 5:175-196.

Nally, J.N. and Meyer, J.-M. (1970): Recherche Experimentale sur la Nature de la Liaison Ceramo-Metallique, Rev Mens Suisse Odonto-Stomatol 80:250-278.

Nally, J.N. ; Monnier, D. ; and Meyer, J.-M. (1968): Distribution Topographique de Certains Elements de l'Alliage et de la Porcelaine au Niveau de la Liaison Ceramo-Metallique , Rev Mens Suisse Odonto-Stomatol 78:868-878.

10.

Moya, E.G. and Moya, F. (1986): Contribution to the Analysis of Penetration Curves for Slightly Soluble Elements: Bulk and Grain-Boundary Diffusion, Acta Met 34:73-78.

11.

Ohno, H. ; Ichikawa, T. ; Shiokawa, N. ; Ino, S. ; and Iwa-Saki, H. (1981): ESCA Study on the Mechanism of Adherence of Metal to Silica Glass, J Mater Sci 16:1381-1390.

12.

Payan, J. ; Moya, E.G. ; Meyer, J.-M. ; and Moya, F. (1986): Changes in Physical and Chemical Properties of a Dental Palladium-Silver Alloy during Metal-Porcelain Bonding, J Oral Rehabil 13:329-338.

13.

Tuccillo, J.J. and Cascone, P.J. (1983): The Evolution of Porcelain-Fused-to-Metal (PFM) Alloy Systems. In: Dental Ceram Proc Int Symp Ceram, J. McLean , Ed., Chicago: Quintessence, pp. 347-370.

Experimental Observation of Silver and Gold Penetration into Dental Ceramic by Means of a Radiotracer Technique

Abstract

Get full access to this article

References