The effect of aging four commercially-available dental composites in water or ethanol at 37°C for periods of up to 28 days was assessed by measuring changes in the materials' plane-strain fracture toughness (KIC). The results, obtained by means of a mini Short Rod Fracture Toughness Test specimen design, suggest that while water aging does not produce significant changes in KIC, aging in ethanol does cause significant increases in fracture toughness for three of the four dental composites studied. In view of previously-reported loss of wear resistance for dental composites aged in ethanol solutions, the present study emphasizes the difficulties in using fracture toughness to predict wear properties.
Get full access to this article
View all access options for this article.
References
1.
Andrews, E.H. and Bevan, L. (1972): Mechanics and Mechanism of Environmental Crazing in a Polymeric Glass, Polymer13:337-346.
2.
Asmussen, E. (1984): Softening of BIS-GMA-Based Polymers by Ethanol and by Organic Acids of Plaque, Scand J Dent Res92 :257-261.
3.
Barker, L.M. (1977): A Simplified Method for Measuring Plane Strain Fracture Toughness, Eng Fract Mech9:361-369.
4.
Barker, L.M. (1981): Short Rod and Short Bar Fracture Toughness Specimen Geometries and Test Methods for Metallic Materials. In: Proceedings, Thirteenth National Symp. of Fracture Mechanics, Fracture Mechanics, R. Roberts, Ed., Philadelphia, PA: American Society for Testing and Materials, STP743, pp. 456-475.
5.
Barker, L.M. (1983): Compliance Calibration of a Family of Short Rod and Short Bar Fracture Toughness Specimens, Eng Fract Mech17:289-312.
6.
Bubsey, R.T.; Munz, D.:; Pierce, W.S.; and Shannon, J.L., Jr. (1982): Compliance Calibration of the Short Rod Chevron-Notch Specimen for Fracture Toughness Testing of Brittle Materials , Int J Fract18:125-133.
7.
De Lange, K. and Davidson, C.L. (1985): Current Status of Posterior Composite Resins in Europe. In: Posterior Composite Resin Dental Restorative Materials , G. Vanherle and D.C. Smith, Eds., The Netherlands: Peter Szulc Publ. Co. , pp. 173-184.
8.
Donald, A.M. and Kramer, E.J. (1981): The Mechanism for Craze-Tip Advance in Glassy Polymers, Phil Mag A43:857-870.
9.
Fisher, R.A. (1970): Statistical Methods for Research Workers, 14th ed. Edinburgh: Oliver and Boyd, pp. 99-101.
10.
Goldman, M. (1985): Fracture Properties of Composite and Glass Ionomer Dental Restorative Materials, J Biomed Mater Res19 :771-783.
11.
Hargreaves, A.S. (1981): The Effect of Environment on Crack Initiation Toughness of Dental Poly(Methyl Methacrylate), J Biomed Mater Res15:757-768.
12.
Lloyd, C.H. (1982): The Fracture Toughness of Dental Composites. II. The Environmental and Temperature Dependence of the Stress Intensification Factor (KIC), J Oral Rehabil9:133-138.
13.
Lloyd, C.H. (1984): The Fracture Toughness of Dental Composites. III. The Effect of Environment Upon the Stress Intensification Factor (KIC) After Extended Storage, J Oral Rehabil11:393-398.
14.
Lloyd, C.H. and Iannetta, R.V. (1982): The Fracture Toughness of Dental Composites I. The Development of Strength and Fracture Toughness, J Oral Rehabil9:55-66.
15.
Lloyd, C.H. and Mitchell, L. (1984): The Fracture Toughness of Tooth Coloured Restorative Materials, J Oral Rehabil11:257-272.
16.
McKinney, J.E. and Wu, W. (1985): Chemical Softening and Wear of Dental Composites , J Dent Res64:1326-1331.
17.
Pilliar, R.M.; Smith, D.C.; and Maric, B. (1986a): Fracture Toughness of Dental Composites Determined Using the Short-rod Fracture Toughness Test, J Dent Res65:1308-1314.
18.
Pilliar, R.M.; Vowles, R.; and Williams, D.F. (1987): Fracture Toughness Testing of Biomaterials Using a Mini-Short Rod Specimen Design, J Biomed Mater Res (accepted for publication).
19.
Rosenfield, A.R. (1981): Wear and Fracture Mechanics. In: Fundamentals of Friction and Wear of Materials, D.A. Rigney, Ed., Metals Park, OH: American Society for Metals, pp. 221-234.
20.
Ruyter, I.E. (1985): Monomer Systems and Polymerization. In: Posterior Composite Resin Dental Restorative Materials, G. Vanherle and D.C. Smith, Eds., The Netherlands: Peter Szulc Publ. Co. , pp. 109-135.
21.
Smith, D.C.; Maric, B.; and Pilliar, R.M. (1987): Sorption of Water by Dental Resin Composites, J Dent Res (submitted).
22.
Tani, Y. (1985): Current Status of Posterior Composite Resins in Japan. In: Posterior Composite Resin Dental Restorative Materials , G. Vanherle and D.C. Smith, Eds., The Netherlands: Peter Szulc Publ. Co. , pp. 185-197.
