Eight different cross-linking agents were added to the monomer component of a linear poly(methyl methacrylate) denture-base resin in various concentrations, and their effect on the impact resistance of the cured polymer studied. The cross-linking agents were chosen to provide a range of cross-linking chain lengths and degrees of chain flexibility. When tested under oral conditions, the polymers cross-linked with long and flexible chains did not show the marked reduction in impact resistance found in polymers cross-linked with shorter and stiffer cross-linking chains. It seems likely that by replacing EGDMA in denture-base resins with a cross-linking agent such as PEG 600 DMA, one could use a higher concentration with a consequent improvement in solvent resistance.
Get full access to this article
View all access options for this article.
References
1.
Acquaviva, S.J. (1971): A Drop Weight Test for the Impact Strength of Ceramic Materials, Mats Res Stand11:21, 22, 47.
2.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (1980): ANSI/ASTM D256-78, Standard Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials.
3.
Amos, J.L.; Rubens, L.C.; and Hornbacher, H.G. (1952): Monomeric Ethylvinylbenzene and Divinylbenzene Mixture and its Copolymers. In: Styrene: its Polymers, Copolymers and Derivatives, R. Boundy and R. Boyer, Eds., New York, Usa: Rein-hold Publishing Corp., pp. 709, 723-726.
4.
Atkinson, J.R. and Brinson, G. (1984): High-Strength Polymers, Metals Forum7:131-145.
5.
Bevan, E.M. and Earnshaw, R. (1968): The Role of Water Sorption in the Solvent Crazing of Acrylic Resins. Part 1, Aust Dent J13:265-273.
6.
BRAUER, G.M. (1977): Polymers in Dentistry. In: Dental Materials Review, R.G. Craig, Ed., Michigan, USA: University of Michigan School of Dentistry, pp. 78-111.
7.
Brown, R.P., Ed. (1981): Handbook of Plastics Test Methods, 2nd ed., London, UK: George Godwin Ltd., pp. 152-168.
8.
Bucknall, C.B. (1977): Toughened Plastics, London , UK: Applied Science Publishers Ltd., pp. 243-304.
9.
Cowperthwaite, G.F.; Foy, J.J.; and Malloy, M.A. (1980): The Nature of the Cross-linking Matrix found in Dental Composite Filling Materials and Sealants, Amer Chem Soc Reprints, Div. of Organic Coatings and Plastics Chemistry, 17th Meeting, 42 :208-214.
10.
Dulik, D.; Bernier, R.; and Brauer, G.M. (1981): Effect of Diluent Monomer on the Physical Properties of BIS-GMA-based Composites, J Dent Res60:983-989.
11.
Harrison, A.; Huggett, R.; and Jagger, R.C. (1978): The Effect of a Cross-linking Agent on the Abrasion Resistance and Impact Strength of an Acrylic Resin Denture Base Material, J Dent6:299-304.
12.
Haward, R.N. (1949): The Strength of Plastics and Glass, London, UK: Cleaver-Hume Press Ltd., pp. 190-197.
13.
Hargreaves, A.S. (1969): The Prevalence of Fractured Dentures, Br Dent J126:451-455.
14.
Hill, R.G. (1981): The Cross-linking Agent Ethylene Glycol Dimethacrylate Content of the Currently Available Acrylic Denture Base Resins, J Dent Res60:725-726.
15.
HULSE, G. (1965): Other Mechanical Properties of High Polymers. In: Physics of Plastics, P. Ritchie, Ed., London, UK: Iliffe Books Ltd., pp. 163-185.
16.
INTERNATIONAL STANDARDS ORGANISATION (1982): International Standard ISO 179, Plastics - Determination of Charpy Impact Strength of Rigid Materials.
17.
Jagger, R.G. and Huggett, R. (1975): The Effect of Cross-linking on Indentation Resistance, Creep and Recovery of an Acrylic Resin Denture Base Material, J Dent3:15-18.
18.
Mark, H. (1942): Intermolecular Forces and Mechanical Behaviour of High Polymers, Ind Eng Chem34:1343-1348.
19.
Mori, T. and Earnshaw, R. (1980): Improvement in the Impact Resistance of Cast Gypsum by Polymer Impregnation, Metals Forum3:236-241.
20.
NIELSEN, L.E. (1974): Mechanical Properties of Polymers and Composites, Vol. 2, New York, USA: Marcel Dekker, Inc., pp. 308-323.
21.
Parker, E.R. (1957): Brittle Behaviour of Engineering Structures, New York, NY: John Wiley and Sons, Inc. , pp. 6-13.
22.
Price, C.A. and Earnshaw, R. (1984): Impact Testing of a Polysulphone Denture Base Polymer, Aust Dent J29:398-403.
23.
Ruyter, I.E. and Svendsen, S.A. (1980): Flexural Properties of Denture Base Polymers, J Prosthet Dent43:95-104.
24.
Smith, D.C. (1957): The Non-metallic Denture Base - Recent Developments , Dent Prac8:73-80.
25.
Vincent, P.I. (1962): The Effect of Notches: Strength of Plastics, Part 5, Plastics27:116-117.
26.
Wollff, E.M. (1962): The Effect of Cross-linking Agents on Acrylic Resins, Aust Dent J7:439-444.
27.
YOUNG, R.J. (1979): Fracture of Thermosetting Resins. In: Developments in Polymer Fracture 1, E. Andrews, Ed., London, UK: Applied Science Publishing Ltd., pp. 183-222.
