Ultrathinning Dental Porcelain for Transmitted Light Microscopy

Abstract

A technique for ultrathinning brittle materials, originally developed at Battelle Pacific Northwest Labs for examination of lunar materials, has been successfully adapted for the preparation of dental porcelain specimens. A commercial dental porcelain and "Component No. 1" of the Weinstein et al. patent were ultrathinned using this technique. Each material was examined in the unfired powder form, after one firing, and after five firings. The sections were typically from 2 to 6 μm thick. The ultrathinned specimens were then examined using transmitted light microscopy. Identical areas of fired porcelain specimens were also examined by reflected light microscopy, scanning electron microscopy, and transmitted light microscopy of ultrathinned specimens in order to compare the three techniques. The porcelain powder and each frit were analyzed by x-ray diffractometry (XRD). Leucite (K₂O·Al₂O₃·4SiO₂) was detected by XRD in the commercial porcelain and the Component No. 1 frit. Optical micrographs of the ultrathinned specimens revealed a second phase within the glassy frit particles of the commercial porcelain and the Component No. 1 material. No phase changes between unfired and fired specimens were detected by XRD. This success in ultrathinning dental porcelains provides a significant improvement in the ability to resolve the constituent phases of these materials relative to standard petrographic techniques and a useful addition to the techniques available for microstructural examination of dental porcelain.

Get full access to this article

View all access options for this article.

References

Beauchamp, R.H. and Williford, J.F. (1974): Metallographic Methods Applied to Ultrathinning Lunar Rocks, Meteorites, Fossils, and Other Brittle Materials for Optical Microscopy. In: Metallographic Specimen Preparation, J.L. McCall and W.M. Mueller , Eds., New York: Plenum Press, pp. 233-249.

Beauchamp, R.H. ; Williford, J.F. ; and Gafford, E.C. (1972a): Exploratory Development and Services for Preparing and Examining Ultrathin Polished Sections of Lunar Rocks and Particulates , Part I, Battelle Pacific Northwest Laboratories Research Report, March 23, 1972.

Beauchamp, R.H. ; Williford, J.F. ; and Gafford, E.C. (1972b): Exploratory Development and Services for Preparing and Examining Ultrathin Polished Sections of Lunar Rocks and Particulates , Part II, Battelle Pacific Northwest Laboratories Research Report, March 23, 1972.

Burk, B. and Burnett, A.P. (1978): Leucite-Containing Porcelains and Method of Making Same. U.S. Patent #4101330, July 18, 1978.

Chamot, E.M. and Mason, C.W. (1938): Handbook of Chemical Microscopy, Vol. 1, 2nd ed., New York: John Wiley & Sons, pp. 360-375.

Donney, J.D.H. and Ondik, H.M. (1973): Crystal Data Determinative Tables, Vol. II: Inorganic Compounds, 3rd ed., Washington, DC: U.S. Department of Commerce, pp. C-359, T-85.

Fairhurst, C.W. ; Anusavice, K.J. ; Hashinger, D.T. ; Ringle, R.D. ; and Twiggs, S.W. (1980): Thermal Expansion of Dental Alloys and Porcelains , J Biomed Mater Res 14:435-446.

Kacicz, J.M. and Burnett, A.P. (1985): Characterization of Dental Porcelain by the Robinson Backscatter Technique, IADR Abst 64: No. 635.

Weinstein, M. ; Katz, S. ; and Weinstein, A.B. (1962): Fused Porcelain-to-Metal Teeth, U.S. Patent #3052982, September 11, 1962.

10.

Winchell, A.N. and Winchell, H. (1964): The Microscopical Character of Artificial Inorganic Solid Substances: Optical Properties of Artificial Minerals, 3rd ed., New York: Academic Press.