Materials Science Elastic Modulus of a Triple-stranded Stainless Steel Arch Wire via Three- and Four-point Bending

Algra, E.A.H. and Der Kinderen, T.A. [1982]: Kunststoffen en Rubber Instituut TNO, private communication.

Brantley, W.A. [1976]: Comments on Stiffness Measurements for Orthodontic Wires, J Dent Res 55:705.

Brantley, W.A. ; Augat, W.S. ; Myers, C.L. ; and Winders, R.V. [1978]: Bending Deformation Studies of Orthodontic Wires, J Dent Res 57:609-615.

Brantley, W.A. and Myers, C.L. [1979]: Measurement of Bending Deformation for Small Diameter Orthodontic Wires, J Dent Res 58:1696-1700.

Brumfield, R.C. [1949]: Dental Gold Structures - Analysis and Practicalities . New York: J.F. Jelenko & Co., Inc., pp. 146-162.

Cernica, J.N. [1966]: Strength of Materials. New York: Holt, Rinehart, and Winston, Inc., p. 410.

Costello, G.A. [1977] : Large Deflections of Helical Spring Due to Bending , J Eng Mech Div 103 (No. EM3): pp. 481-487.

Costello, G.A. [1981]: Department of Theoretical and Applied Mechanics , University of Illinois, private communication.

Costello, G.A. and Miller, R.E. [1979]: Lay Effect of Wire Rope, J Eng Mech Div 105 (No. EM4):pp. 597-608.

Costello, G.A. and Phillips, J.W. [1976]: Effective Modulus of Twisted Wire Cables, J Eng Mech Div 102 (No. EM1):pp. 171-181.

Craig, R.G. ; Slesnick, H.J. ; and Peyton, F.A. [1965]: Application of 17-7 Precipitation-hardenable Stainless Steel in Dentistry , J Dent Res 44:587-595.

Cullity, B.D. [1956]: Elements of X-ray Diffraction. Reading, MA: Addison-Wesley, p. 292.

DATASHEET No. 9 [1968], Quick Refresher on Stainless Steel Fundamentals , International Nickel, New York .

Dusenberry, G.R. (1974): A Study of Elastic Bending Properties in Multistranded Wire, M.S. Thesis, University of North Carolina School of Dentistry.

Eshbach, O.W. and Souders, M. [1975]: Handbook of Engineering Fundamentals, 3rd ed. New York: John Wiley & Sons, p. 518.

Goldberg, A.J. ; Morton, J. ; and Burstone, C.J. [1983]: The Flexure Modulus of Elasticity of Orthodontic Wires, J Dent Res 62:856-858.

Goldberg, A.J. ; Vanderby, R., Jr. ; and Burstone, C.J. [1977] : Reduction in the Modulus of Elasticity in Orthodontic Wires , J Dent Res 56:1227-1231.

Hammant, B. [1971] : The Use of 4-point Loading Tests to Determine Mechanical Properties , Composites 2:246-249.

Heap, R.D. and Norman, R.H. [1969]: Flexural Testing of Plastics. London: The Plastics Institute.

Huang, N.C. [1977]: On the Flexure of Elastic Two-filament Yarns, Textile Res J 47:73-76.

Huang, N.C. [1981]: Department of Aerospace and Mechanical Engineering , University of Notre Dame, private communication.

Knutsson, L. [1980] : Flexure Tests of Three Fibrous Composite Materials . The Aeronautical Research Institute of Sweden, Technical Note HU-2127, Part 3, Stockholm.

Love, A.E.H. [1944]: A Treatise on the Mathematical Theory of Elasticity . New York: Dover Publications , Chapters 18 and 19.

Lyman, T. , Ed. [1969]: Metals Handbook, Vol. I, Properties and Selection of Metals, 8th ed. Metals Park: American Society for Metals, pp. 408-431.

McConnell, K.G. and Zemke, W.P. [1980]: The Measurement of Flexural Stiffness of Multistranded Electrical Conductors While Under Tension, Experimental Mech , June: 198-204.

Murray, P.F. [1981]: The Firestone Tire & Rubber Company, private communication.

Nielsen, L.E. [1967]: Mechanical Properties of Polymers. New York: Reinhold Publishing Corp., p. 7.

Parker, T.D. [1968]: Strength of Stainless Steels at Elevated Temperature . In: Selection of Stainless Steels, Metals Park: American Society for Metals, pp. 62-63.

Pattishall, F.D. [1968]: A Comparison of the Mechanical Properties of Solder Joints Formed on Stainless Steel and Green Elgiloy Wires Using Electric and Flame Soldering Techniques, M.S. Thesis, University of North Carolina School of Dentistry.

Phillips, J.W. and Costello, G.A. [1979]: General Axial Response of Stranded Wire Helical Springs, Int J Non-Linear Mech 14:247-257.

Schmid, E. and Boas, W. [1950]: Plasticity in Crystals (English Translation). London: Hughes and Co.

Timoshenko, S. and Lessells, J.M. [1925]: Applied Elasticity. East Pittsburgh, PA: Westinghouse Technical Night School Press, p. 214.

Yoshikawa, D.K. ; Burstone, C.J. ; Goldberg, A.J. ; and Morton, J. [1981] : Flexure Modulus of Orthodontic Stainless Steel Wires, J Dent Res 60:139-145.