For gold alloys containing only In as a base metal, an external In2O3 layer forms uniformly on the alloy surface. However, when the alloy contains Sn and In, no external oxide layer can be detected by electron probe micro-analysis, and oxide particles composed of In2O3 and SnO2 precipitate in the alloy. For alloys containing Ni, in addition to In and Sn, the external oxide is composed of NiO; there is little development of internal oxide. For alloys containing Fe and Sn, an oxide layer of only Fe2O3 forms on the alloy surface, and the internal oxidation zone shows a band-like structure containing SnO2 and a small amount of Fe2O3.
Get full access to this article
View all access options for this article.
References
1.
Ohno, H.; Ichikawa, T.; Shiokawa, N.; Ino, S.; and Iwasaki, H.: ESCA Study on the Mechanism of Adherence of Metal to Silica Glass , J Mat Sci16:1381-1390, 1981 .
2.
Lautenschlager, E.P.; Greener, E.H.; and Elking-Ton , W.E.: Micro-probe Analysis of Gold-Porcelain Bonding, J Dent Res48:1206-1210, 1969.
3.
Cascone, P.J. and Tuccillo, J.F.: Theoretical Interfacial Reactions Responsible for Bonding in Porcelain-to-Metal Systems (Part I), IADR Prog & Abstr56:No. 640, 1977.
4.
Cascone, P.J. ; Massimo, M.; and Tuccillo, J.F.: Theoretical Interfacial Reactions Responsible for Bonding in Porcelain-to-Metal Systems (Part II), IADR Prog & Abstr57:No. 872, 1977.
5.
Ringle, R.R. ; Fairhurst, C.W.; and Anusavice , K.J.: Microstructures in Non-precious Alloys Near the Porcelain-Metal Interaction Zone, J Dent Res58:1987-1993, 1979 .
6.
Yli-Urpo, A. : Investigation of a Dental Gold Alloy and Its Ceramic Bonding, Acta Odont Scand Suppl69:59-182, 1975.
7.
Iwama, H.: Bonding Strength between Porcelain and Gold Alloy, J Jpn Soc Dent App Mater17:11-18, 1976.
8.
Uchiyama, I.; Watanabe, A.; and Kimoto, S.: Electron Probe X-ray Microanalyzer, Tokyo, Japan: Nikkan Kogyo Shinbun-Shya, 1972, pp. 127-184.
9.
Bohm, G. and Kahlweit, M.: On Internal Oxidation of Metallic Alloys, Acta Metallurgica12:641-648, 1964.
10.
Igarashi, T. ; Shibata, M.; and Kodama, Y.: The Precipitation Behavior of Oxide during Internal Oxidation of Ag-In-Sn Alloys, J Jpn Inst Met44:378-386, 1980.
11.
Pethe, L.D. ; Mathur, H.B.; and Biswas, A.B.: Transition from Internal to External Oxidation in Indium-Silver Alloys, Canad J Chem46:1187-1196, 1968.
12.
Kofstad, P.: High-temperature Oxidation of Metals, New York : John Wiley & Sons, Inc., 1966, p. 133.
13.
Meijering, J.L.: Internal Oxidation in Alloys, Adv Mater Res5:1-81, 1971.
14.
Ohno, H.: Studies on High Temperature Oxidation of Noble Metal Alloys for Dental Use (Part I), J Jpn Soc Dent App Mater17:297-312, 1976.
15.
Kubschewski, O. and Alcock, C.B.: Metallurgical Thermochemistry, 5th ed., New York: Pergamon Press, 1979, p. 378.
16.
Cullity, B.D.: Elements of X-ray Diffraction, Reading, PA: Addison-Wesley Publishing Co., 1956, p. 269.
17.
Rapp, R.A.: The Transition from Internal to External Oxidation and the Formation of Interruption Bands in Silver-Indium Alloys,Acta Metallugica9:730-741, 1961.
18.
Hauffe, K.: Oxidation of Metals, New York: Plenum Press, 1965, p. 296.
19.
Ibid., p. 302.
20.
Leven, E.M. and McMurdie, H.F.: Phase Diagrams for Ceramists, 1975 Supplement , Columbus, OH: The American Ceramic Society, 1975, p. 43.
