Laser Evaluation of Handpiece Contamination

Abstract

Six different models of ultra-high speed handpieces were evaluated in regard to debris accumulation following cutting through tooth structure. A weight-load machine and a laser particle detector were utilized to evaluate the amount of the debris retained. Amounts of debris accumulated after dry and wet cutting were also evaluated. The effect of simple wiping of the handpieces with alcohol gauze was assessed. The results obtained show that the longer the cutting time, the larger the amounts of debris retained on the handpieces. Dry cutting resulted in smaller amounts of debris entrapped than following wet cutting. The cleaning by wiping with alcohol gauze reduced the amounts of the debris, but is insufficient and cannot be utilized as a single procedure for decontaminating handpieces. The external head design is a cardinal factor in retention of debris: larger but smoother surfaces will retain less debris than smaller but more complicated surfaces. External tubings are debris retention foci.