A Novel Multi-Cross-linking Diluent System to Stabilize Self-Etch Bonding

Abstract

Despite the indispensability of 2-hydroxyethyl methacrylate (HEMA) for improving the wettability of self-etch (SE) adhesives, elevated concentration may compromise the durability of the hybrid layer. This study proposes a modification strategy to preserve the wettability of SE adhesives while reducing excessive HEMA content and enhancing hybrid layer integrity through introducing collagen-protective and hydrophobic features. Thus, a novel diluent system was developed by partially replacing HEMA with 2 hydrophobic cross-linking reagents, 3-(4-formylphenoxy)-2-hydroxypropyl methacrylate (FPA) and glycidyl methacrylate (GMA). Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), confocal laser scanning microscopy (CLSM), wettability, and water contact angle analyses confirmed that FPA induced rapid but transient cross-linking with collagen. Thus, the compatibility of collagen with hydrophobic adhesives was improved. The time-dependent cross-linking efficacy of GMA was evaluated by ATR-FTIR and sodium dodecyl sulfate–polyacrylamide gel electrophoresis. Guided by these findings, FPA-GMA adhesives were formulated and subjected to physicochemical (flexural strength, Vickers microhardness, and water sorption/solubility) and biological (Cell Counting Kit-8, calcein acetoxymethyl ester/propidium iodide) evaluations. Enzymatic degradation assays, including in situ zymography, gelatin zymography, and the hydroxyproline releasing test, verified that FPA-GMA adhesives built the degradation-resistant hybrid layer during dentin bonding. CLSM, micro-tensile bond strength, and nanoleakage analysis corroborated the establishment of a stable and durable FPA-GMA dentin-bonding interface before and after 10,000 thermocycles. Collectively, this study evaluated whether FPA-GMA formulations improve the physicochemical properties of experimental adhesives and their biological/functional interactions with dentin, as assessed by enzymatic activity and bonding performance at the dentin–bonding interface. The results demonstrated that FPA-GMA provided sustained collagen protection while preserving SE infiltration and enhancing its mechanical properties, which thereby improved the durability of the dentin-bonding interface.

Keywords

dental bonding cross-linking reagent matrix metalloproteinase adhesive collagen hydroxyethyl methacrylate

Get full access to this article

View all access options for this article.

References

Ahmed

, et al. 2021. Multiparameter evaluation of acrylamide HEMA alternative monomers in 2-step adhesives. Dent Mater. 37(1):30–47. https://doi.org/10.1016/j.dental.2020.10.002

Altunsoy

Selim Botsali

Ulker

. 2015. Evaluation of HEMA released from four different adhesive systems by HPLC. J Appl Biomater Funct Mater. 13(2):e100–e105. https://doi.org/10.5301/jabfm.5000200

Betancourt

Baldion

Castellanos

. 2019. Resin-dentin bonding interface: mechanisms of degradation and strategies for stabilization of the hybrid layer. Int J Biomater. 2019(1):5268342. https://doi.org/10.1155/2019/5268342

Cadenaro

, et al. 2023. Progress in dental adhesive materials. J Dent Res. 102(3):254–262. https://doi.org/10.1177/00220345221145673

Chang

Tanaka

2002. XPS study for the microstructure development of hydroxyapatite-collagen nanocomposites cross-linked using glutaraldehyde. Biomaterials. 23(18):3879–3885. https://doi.org/10.1016/s0142-9612(02)00133-3

Chen

, et al. 2021. Synergistic effects of graphene quantum dots and carbodiimide in promoting resin-dentin bond durability. Dent Mater. 37(10):1498–1510. https://doi.org/10.1016/j.dental.2021.07.004

da Costa Sanches

, et al. 2015. Thermal characterization study of chondroitin sulfate-co-N-isopropylacrylamide as drugs carrier. J Therm Anal Calorim. 120(1):991–999. https://doi.org/10.1007/s10973-014-4380-4

De Angelis

, et al. 2022. Meta-analytical analysis on components released from resin-based dental materials. Clin Oral Investig. 26(10):6015–6041. https://doi.org/10.1007/s00784-022-04625-4

De-Paula

, et al. 2020. Influence of collagen cross-linkers addition in phosphoric acid on dentin biomodification and bonding of an etch-and-rinse adhesive. Dent Mater. 36(1):e1–e8. https://doi.org/10.1016/j.dental.2019.11.019

10.

Orakdogen

2022. Dynamic modulation and epoxy functionalization of protein-mediated enoate ester-based hybrid cryogels. Int J Biol Macromol. 223(Pt A):1158–1179. https://doi.org/10.1016/j.ijbiomac.2022.11.063

11.

Fajardo

Fávaro

Rubira

Muniz

EC.

2013. Dual-network hydrogels based on chemically and physically crosslinked chitosan/chondroitin sulfate. React Funct Polym. 73(12):1662–1671. https://doi.org/10.1016/j.reactfunctpolym.2013.10.003

12.

Fujita

, et al. 2011. Effect of reacted acidic monomer with calcium on bonding performance. J Dent Res. 90(5):607–612. https://doi.org/10.1177/0022034510397837

13.

Fujita (Nakajima)

Nikaido

Arita

Hirayama

Nishiyama

. 2018. Demineralization capacity of commercial 10-methacryloyloxydecyl dihydrogen phosphate-based all-in-one adhesive. Dent Mater. 34(10):1555–1565. https://doi.org/10.1016/j.dental.2018.06.027

14.

Fukegawa

, et al. 2006. Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res. 85(10):941–944. https://doi.org/10.1177/154405910608501014

15.

Garcia

, et al. 2021. Magnetic motion of superparamagnetic iron oxide nanoparticles- loaded dental adhesives: physicochemical/biological properties, and dentin bonding performance studied through the tooth pulpal pressure model. Acta Biomater. 134:337–347. https://doi.org/10.1016/j.actbio.2021.07.031

16.

Shan

Tay

Niu

2019. Novel biomedical applications of crosslinked collagen. Trends Biotechnol. 37(5):464–491. https://doi.org/10.1016/j.tibtech.2018.10.007

17.

Kim

, et al. 2021. 3D bioprinted silk fibroin hydrogels for tissue engineering. Nat Protoc. 16(12):5484–5532. https://doi.org/10.1038/s41596-021-00622-1

18.

Leme-Kraus

, et al. 2020. Dimeric proanthocyanidins on the stability of dentin and adhesive biointerfaces. J Dent Res. 99(2):175–181. https://doi.org/10.1177/0022034519892959

19.

Nakabayashi

Nakamura

Yasuda

1991. Hybrid layer as a dentin-bonding mechanism. J Esthet Restor Dent. 3(4):133–138. https://doi.org/10.1111/j.1708-8240.1991.tb00985.x

20.

Riaz

, et al. 2018. FTIR analysis of natural and synthetic collagen. Appl Spectrosc Rev. 53(9):703–746. https://doi.org/10.1080/05704928.2018.1426595

21.

Sauro

, et al. 2007. Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives. Dent Mater. 23(6):705–713. https://doi.org/10.1016/j.dental.2006.06.010

22.

Sauro

, et al. 2009. Influence of the hydrostatic pulpal pressure on droplets formation in current etch-and-rinse and self-etch adhesives: a video rate/TSM microscopy and fluid filtration study. Dent Mater. 25(11):1392–1402. https://doi.org/10.1016/j.dental.2009.06.010

23.

Schuurmans

CarlCL

, et al. 2021. Hyaluronic acid and chondroitin sulfate (meth)acrylate-based hydrogels for tissue engineering: synthesis, characteristics and pre-clinical evaluation. Biomaterials. 268:120602. https://doi.org/10.1016/j.biomaterials.2020.120602

24.

Stape

THS

Mutluay

Tezvergil-Mutluay

. 2024. To etch or not to etch, part III: on the hydrophobic-rich content and fatigue strength of universal adhesives after long-term ageing. Dent Mater. 40(1):44–52. https://doi.org/10.1016/j.dental.2023.09.012

25.

Takamizawa

, et al. 2019. SEM observation of novel characteristic of the dentin bond interfaces of universal adhesives. Dent Mater. 35(12):1791–1804. https://doi.org/10.1016/j.dental.2019.10.006

26.

Tang

, et al. 2023a. Bonding performance of experimental HEMA-free two-step universal adhesives to low C-factor flat dentin. Dent Mater. 39(6):603–615. https://doi.org/10.1016/j.dental.2023.04.008

27.

Tang

, et al. 2023b. The cross-linking and protective effect of artemisinin and its derivatives on collagen fibers of demineralized dentin surface. J Dent. 138:104733. https://doi.org/10.1016/j.jdent.2023.104733

28.

Tian

, et al. 2025. A novel dual cross-linking reagent for dentin bonding interface stability. J Dent Res. 104(3):251–259. https://doi.org/10.1177/00220345241300263

29.

Tjäderhane

. 2015. Dentin bonding: can we make it last? Oper Dent. 40(1):4–18. https://doi.org/10.2341/14-095-bl

30.

Wei

, et al. 2024. Light-curable urushiol enhanced bisphenol A glycidyl dimethacrylate dentin bonding agent. J Dent. 148:105261. https://doi.org/10.1016/j.jdent.2024.105261

31.

W-C

, et al. 2016. Hydrogen bonds of a novel resin cement contribute to high adhesion strength to human dentin. Dent Mater. 32(1):114–124. https://doi.org/10.1016/j.dental.2015.11.002

32.

Yaghmoor

, et al. 2022. Incorporation of MMP inhibitors into dental adhesive systems and bond strength of coronal composite restorations: a systematic review and meta-analysis of in vitro studies. Jpn Dent Sci Rev. 58:298–315. https://doi.org/10.1016/j.jdsr.2022.09.004

33.

Yamauchi

Wang

Egusa

Sun

2020. High-performance dental adhesives containing an ether-based monomer. J Dent Res. 99(2):189–195. https://doi.org/10.1177/0022034519895269

34.

Wang

Spencer

2009. Nanophase separation of polymers exposed to simulated bonding conditions. J Biomed Mater Res B Appl Biomater. 88(2):339–348. https://doi.org/10.1002/jbm.b.31047

35.

Yoshida

Inoue

2012. Chemical analyses in dental adhesive technology. Jpn Dent Sci Rev. 48(2):141–152. https://doi.org/10.1016/j.jdsr.2012.03.001

36.

, et al. 2021. A novel dentin bonding scheme based on extrafibrillar demineralization combined with covalent adhesion using a dry-bonding technique. Bioact Mater. 6(10):3557–3567. https://doi.org/10.1016/j.bioactmat.2021.03.024

37.

, et al. 2025. Effects of a hydrophilic collagen-reactive monomer on dentin bond durability. J Dent Res. 104(7):734–742. https://doi.org/10.1177/00220345251316434

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.85 MB