Abstract
To define the optimized material properties of caries-infiltrating resins (infiltrants), we evaluated the effects of infiltrant composition and penetration coefficient (PC) on the inhibition of the progression of natural approximal caries lesions in vitro. Non-cavitated natural enamel lesions were etched (15% HCl gel) and infiltrated for 5 min with experimental resins varying in PC (cm/sec): PC63, PC185, PC204, and PC391. As a positive control (PosC), lesions were covered with flowable composite resin, whereas untreated lesions served as negative controls (NegC). Specimens were exposed to a demineralizing solution (pH 4.95) for 400 days. Progression of mineral loss was analyzed by transverse wavelength-independent microradiography. Percentage progressions of NegC [median (25th/75th percentile), 24 (10/56)], PC63 [9 (3/39)], and PC185 [12 (9/24)] were significantly higher compared with those of PosC [1 (-8/8)], PC204 [-2 (-4/2)], and PC391 [0 (-5/9)] (p < 0.05). Thus, infiltrants with PC > 200 cm/sec are capable of inhibiting lesion progression.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
