Design Optimization of Composite Plates: Part I—Design Criteria for Strength,Stiffness,and Manufacturing Complexity of Composite Laminates

Abstract

Design criteria are essential for describing the objectives of optimization. Strength, stiffness, and manufacturing are addressed.

The mechanical criteria, for strength and stiffness, provide with the magnitude by which the thickness of a given laminate must be scaled in order to just meet all requirements. For first-ply-failure strength, a quartic failure criterion was derived from the quadratic Tsai-Wu criterion, for unsymmetric and symmetric laminates subject to mixed loadsets. For stiffness, maximum displacement constraints can be selectively set on all components and modulus. Combined strength and stiffness control is also analyzed. While developed for single elements, these criteria are also suited for designing entire laminated plates.

Assessing manufacturing complexity without undertaking a detailed cost analysis is achieved by an index which interprets numerically qualitative issues such as simple and complex layups. The new manufacturing complexity index takes into account variations in thickness, the steepness of plydrops and the number of zones across a structure.

Get full access to this article

View all access options for this article.

References

1. P. M. Manne, Design Optimization of Composite Plates. PhD thesis, Department of Aeronautics & Astronautics, Stanford University, Stanford, CA, May 1996.

2. P. M. Manne and S. W. Tsai , "Design Optimization of Composite Plates. Part II—Structural Optimization by Plydrop Tapering," Journal of Composite Materials, 32(6): 572-598.

3. S. W. Tsai and H. T. Hahn , Introduction to Composite Materials. Lancaster, PA: Technomic Publishing, Co., Inc., 1980.

4. S. W. Tsai , Composites Design. Dayton, OH: Think Composites, 4th ed., 1988.

5. S. W. Tsai , Theory of Composites Design. Dayton, OH: Think Composites, 1992.

6. F. K. Chang , Design of Composite Structures. AA257 Class Notes, Stanford University, Spring 1991.

7. J. A. Kurland, Strength Optimization of Laminated Composite Structures. PhD thesis, Department of Mechanical Engineering, Stanford University, Stanford, CA, June 1994.

8. W. Press , S. Tenkolsky , W. Vetterling , and B. Flannery , Numerical Recipes in C. Cambridge, United Kingdom: Cambridge University Press, 2nd ed., 1992.

9. G. Dahlquist and A. Björck , Numerical Methods. Prentice-Hall Series in Automatic Computation, Englewood Cliffs, NJ: Prentice-Hall, 1974.

10.

10. J. Reddy and A. Miravete , Practical Analysis of Composite Laminates. Boca Raton, FL: CEC Press, 1995.

11.

11. J. E. Ashton and J. M. Whitney , Theory of Laminated Plates, vol. IV of Progress in Materials Science, Lancaster, PA: Technomic Publishing Co., Inc., 1970.

12.

12. A. E. Love , A Treatise on the Mathematical Theory of Elasticity. New York, NY: Dover, 4th ed., 1927.

13.

13. M. R. Spiegel , Mathematical Handbook of Formulas and Tables. Schaum's Outline Series in Mathematics & Statistics, New York, NY: McGraw-Hill, 1974.

14.

14. S. Metschan , D. Graesser , G. Mabson , M. Proctor , D. Tervo , and L. Ilcewicz , "Manufacturing Data for Costade Analysis of Composite Fuselage Panels," in Boeing's Advanced Technology Composite Aircraft Structures Program Presentations, 5th Advanced Composite Technology Conference, August 1994.

15.

15. P. M. Manne and S. W. Tsai , "Design Optimization of Tapered Composite Structures Using SAMCEF," in Conference Proceedings, 5th SAMCEF Users Conference, Liege, Belgium, June 1996.