Abstract
Dry spot formation and changes in liquid composite molding (LCM) were investigated by flow visualization experiments. The dry spot size can be reduced by three mechanisms: (1) it can be compressed by the hydrostatic pressure from the surrounding saturated region; (2) it can be reduced by bleeding trapped air into the surrounding saturated region if there is a pressure gradient in the saturated region; and (3) it may gradually disappear by the wicking flow due to the capillary pressure difference between the saturated region and the dry fiber region. Experiments of packing and bleeding, a technique used in industry to eliminate dry spots, were also carried out and the results are explained based on the three types of dry spot changes.
Keywords
Get full access to this article
View all access options for this article.