Aluminum matrix composite materials containing SiC whisker and Saffil alumina short fiber are fabricated by the direct squeeze infiltration method. Optimum processing conditions for preforms and squeeze casting are suggested. For minimum damage of the reinforcements, the relatively low pressure of 25 MPa is applied.
Get full access to this article
View all access options for this article.
References
1.
Schoutens, J.E. and K. Tempo.1982. Introduction to the Metal Matrix Composite Materials. MMCIAC.
2.
Chou, T.W., A. Kelly and A. Ocura.1985. "Fibre-Reinforced Metal-Matrix Composites,"Composites, 16(3):187-206.
3.
Surappa, M.K. and P.K. Rohatgi.1978. "Production of Alumimum-Graphite Particle Composites Using Copper-Coated Graphite Particles,"Metals Technology (Oct.):358-361.
4.
Krishnan, B.P. , M.K. Surappa and P.K. Rohatgi.1981. "The UPAL Process: A Direct Method of Preparing Cast Aluminum Alloy-Graphite Particle Composites,"J. of Materials Science , 16:1209-1216.
5.
Girot, F.A., L. Albingre, J.M. Quemsset and R. Naslain.1987. "Rheocastmg of Al Matrix Composites,"J. of Metals (Nov.):18-21.
6.
Hosking, F.M. , F.F. Portillo, R. Wunderlin and R. Mehrabian.1982. "Composites of Aluminium Alloys: Fabrication and Wear Behaviour,"J. of Materials Science, 17:477-498.
7.
Mehrabian, R. , R.G. Riek and M.C. Flemings.1974. "Preparation and Casting of Metal-Particulate Non-Metal Composites,"Metallurgical Transactions, 5:1899-1905.
8.
Nieh, T.G. and D.J. Chellman.1984. "Modulus Measurements in Discontinuous Reinforced Aluminum Composites,"Scripta Metallurgica , 18:925-928.
9.
Divecha, A.P. , S.G. Fishman and S.D. Karmarkar.1981. "Silicon Carbide Reinforced Aluminum—A Formable Composite,"J. of Metals (Sept.):12-16.
10.
McDanels, D.L.1985. 'Analysis of Stress-Strain, Fracture, and Ductility Behaviour of Aluminum Matrix Composites Containing Discontinuous Silicon Carbide Reinforcement,"Metallurgical Transactions A, 16A:1105-1115.
11.
Williams, D.R. and M.E. Fine.1985. "Quantitative Determination of Fatigue Microcrack Growth in SiC Whisker Reinforced 2124 Al Alloy Composites,"Proceeding of ICCM-V, San Diego, CA , July 29-Aug. 1 , 1985, AIME TMS, pp. 639-670.
12.
Girot, F.A. , R. Fedou, J.M. Quemsset and R. Naslain.1987. "On the Squeeze Casting Conditions of Aluminum Matrix Composite Materials," Proceeding of the American Society for Composites, The Second Technical Conference, Dayton, OH, pp. 361-370.
13.
Sakamoto, A. , H. Hasegawa and Y. Minoda.1985. "Mechanical Properties of SiC Whisker Reinforced Aluminum Composites,"Proceeding of ICCM-V, San Diego, CA, July 29-Aug. 1, 1985, AIME TMS, pp. 699-707.
14.
Kannikeswaran, K. and R.Y. Lin.1987. "Trace Element Effects on Al-SiC Interfaces,"J. of Metals (Sept.):17-19.
15.
Clyne, T.W. and J.F. Mason.1987 "The Squeeze Infiltration Process for Fabrication of Metal Matrix Composites,"Metallurgical Transaction A, 18A.1519-1530.
16.
Clyne, T.W. and M.G. Bader.1985. "Analysis of a Squeeze-Infiltration Process for Fabrication of Metal Matrix Composites,"Proceeding of ICCM-V, San Diego, CA, July 29-Aug.1, 1985, AIME TMS, pp 755-771.
17.
Chi, F.K., R.D. Maier, T.W. Krucek and P. M.Boymel.1987. "Short Aluminosilicate Fiber Reinforced Aluminum Alloy,"Proceeding of ICCM-VI & ECCM-II, July20-24,
Masur, L.J., A. Mortensen, J.A. Cornie and M.C. Flemings.1987. "Pressure Casting of Fiber-Remforced Metals," Proceeding of ICCM-VI & ECCM-II, July 20-24
Yang, J. and D.D.L. Chung.1989. "Casting Particulate and Fibrous Metal-Matrix Composites by Vacuum Infiltration of a Liquid Metal under an Inert Gas Pressure,"Proceeding ICCM-VII, Nov. 22-24
Gallerneault, M. and D.J. Lloyd.1989. "The Effects of Preform Reactivity upon the As-Cast Microstructure of Fibre Reinforced AlSi Alloys,"Canadian Metall. Quarterly , 28(3).265-270.
24.
Ghosh, P.K. and S. Ray.1986. "Effect of Porosity and Alumina Content on the Mechanical Properties of Compocast Aluminum Alloy-Alumina Particulate Composite,"J of Materials Science , 21:1667-1674.
25.
Nutt, S.R. and R.W. Carpenter.1985. "Non-Equilibrium Phase Distribution in Al-SiC Composite,"Materials Science & Engineering , 75:169-177.
26.
Flom, Y. and R.J. Arsenault.1986. "Deformation of SiC/Al Composites,"J of Metals (July): 31-34.
27.
Nardone, V.C. and K.M. Prewo.1986. "On the Strength of Discontinuous Silicon Carbide Reinforced Aluminum Composites," Scnpta Metallurgica, 20:43-48.
28.
Arsenault, R.J.1984. "The Strengthening of Aluminum Alloy 6061 by Fiber and Platelet Silicon Carbide,"Materials Science & Engineering, 64:171-181.
29.
Bengtsson, S., C.H. Li and R. Warren.1989. "Microstructural Studies of d-Alumina Fibre Reinforced Aluminum and Al Alloys,"Proceeding ICCM-VII, Nov. 22-24,
Schierding, R.G. and O.D. Deex.1969. "Factors Influencing the Properties of Whisker-Metal Composites,"J. of Composite Materials, 3:618-629.
32.
Wadsworth, J., C.A. Henshall, T.G. Nieh, A.R. Pelton and P.S. Gilman.1985. "Extended Ductility in SiC Whisker Reinforced Aluminum Alloys and Mechamcally Alloyed Aluminum Alloys,"High Strength Powder Metallurgy Aluminum AlloysII, pp. 137-154.
33.
Friend, C.M.1989. "The Effect of Temperature on the Tensile Strength of Short d-Alumina Fibre/Aluminum Alloy Metal Matrix Composites,"Scripta Metallurgica,23:33-37.
34.
Dinwoodie, J. , E. Moore, C.A. J. Langman and W.R. Symes.1985. "The Properties and Applications of Short Staple Alumina Fibre Reinforced Aluminum Alloys,"Proceeding of ICCM-V, San Diego, CA, July 29-Aug. 1, 1985, AIME TMS, pp. 671-685.
35.
Long, T.T., T. Nishimura, T. Aisaka, M. Ose and M. Morita.1988. "Mechanical Properties and Wear Resistance of 6061 Al Alloy Reinforced with Hybrid Al2O3 Fibers and SiC Whiskers,"Transactions of Japan Institute of Metal , 29(11):920-927.
36.
Kelly, A. and W.R. Tyson.1965. "Tensile Properties of Fibre Reinforced Materials: Copper/ Tungsten and Copper/Molybdenum,"J. of Mech. Phys. Solids, 13:329.
37.
Lim, T. and K.S. Han.Private results.
38.
Tsai, S.W. and N.J. Pagano.1968. "Invanant Properties of Composite Materials," Composite Materials WorkshopLancaster, PA: Technomic Publishing Co. , Inc. , pp. 233-253.
39.
Lim, T. and K.S. Han.1989. "The Effective Stiffness of the Random Oriented Fiber Composite,"Proceeding ICCM-VII , Nov. 22-24,
Chnstman, T. and S. Suresh.1988. "Microstructural Development in an Aluminum Alloy-SiC Whisker Composite,"Acta Metallurgica,36(7):1691-1704.
42.
Christman, T. , A. Needleman, S. Nutt and S. Suresh.1989. "On Microstructural Evolution and Micromechanical Modelling of Deformation of a Whisker-Reinforced Metal Matrix Composite,"Materials Science & Engineering , 107A:49-61.
