Composite tubes can be reinforced with continuous fibers. When such tubes are subjected to crushing loads, the response is complex and depends on interaction between the different mechanisms that control the crushing process. The modes of crush ing and their controlling mechanisms are described. Also, the resulting crushing process and its efficiency are addressed.
Farley, G.L. and R.M. Jones1989. "Energy-Absorption Capability of Composite Tubes and Beams," NASA TM 101634.
2.
Bannerman, D.C. and C.M. Kindervater.1983. "Crash Energy Absorption Properties of Composite Structural Elements;' Proceedings of the Fourth International Conference SAMPE European Chapter, Bordeaux, France, October, pp. 155-167.
3.
Thornton, P.H.1979. "Energy Absorption in Composite Structures,"Journal of Composite Materials , (July):248-262.
4.
Price, J.N. and D. Hull.1987. "The Crush Performance of Composite Structures,"Composite Structures , Marshall, ed. , Elsevier Applied Science, pp. 2.32-2.44
5.
Hull, D.1982. "Energy Absorption of Composite Materials under Crash Conditions," Proceedings of the Fourth International Conference on Composite Materials, Japan Society for Composite Materials, Tokyo, Japan, October, T. Hayashi, K. Kawata and S. Umekawa, eds., pp. 861-870.
6.
Kindervater, C.M.1983. "Energy Absorbing Qualities of Fiber-Reinforced Plastic Tubes,"Proceedings of the AHS National Specialist Meeting on Composite Materials for Helicopters, Philadelphia, PA, March, 1983.
7.
Mamalis, A.G. , D.E. Manolakas and G.L. Viegelahn.1990. "Crashworthy Behavior of Thin-Walled Tubes of Fiberglass Composite Materials Subjected to Axial Loading,"Journal of Composite Materials , 24:72-91.
8.
Fairfull, A.H. and D. Hull.1987. "Effects of Specimen Dimensions on the Specific Energy Absorption of Fibre Composite Tubes," Proceedings of the Sixth International Conference on Composite Materials, July, F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson and J. Morton, eds. , London, U.K.: Elsevier Applied Science, pp. 3.36-3.45.
9.
Fairfull, A.H. and D. Hull.1988. "Energy Absorption of Polymer Matrix Composite Structures : Friction Effects," Structural Failure in Symposium on Structural Failure, June.
10.
Snowdon, P. and D. Hull."Energy Absorption of SMC Under Crash Conditions," Fibre Reinforced Composites Conference '84, Plastics and Rubber Institute, pp. 5.1-5.10.
11.
Schmueser, D.W. , G.A. Kardomateas and G.T. Mase.1987. "Material Design Parameters Affecting the Compressive and Bending Load Capacity of Delaminated Angle-Ply Composites," Proceedings of the Third Annual Conference on Advanced Composites, ASM International, Detroit, Michigan, September 1987, pp. 83-91.
12.
Schmueser, D.W. and L.E. Wickliffe.1987. "Impact Energy Absorption of Continuous Fiber Composite Tubes,"ASME, 109:72-77.
13.
Sen, J.K. and C.C. Dremann.1985. "Design Development Tests for Composite Crashworthy Helicopter Fuselage,"SAMPE Quarterly , 17(1):29-39.
14.
Kindervater, C.M.1981. "Quasi-Static and Dynamic Crushing of Energy Absorbing Materials and Structural Components with the Aim of Improving Helicopter Crashworthiness,"Proceedings of Seventh European Rotorcraft and Powered Lift Aircraft Forum, Garmisch-Partenkirchen , Federal Republic of Germany, September 1981, pp. 66.1-66.25.
