The fracture resistance of a commercial TiB2 particle/SiC matrix composite was evalu ated at temperatures ranging from 20 to 1400°C. A laser interferometric strain gage (LISG) was used to continuously monitor the crack mouth opening displacement (CMOD) of the chevron-notched and straight-notched, three-point bend specimens used. Crack growth resistance curves (R-curves) were determined from the load versus displacement curves and displacement calibrations. Fracture toughness, work-of-fracture, and R-curve levels were found to decrease with increasing temperature. Microstructure, fracture sur face, and oxidation coat were examined to explain the fracture behavior.
Get full access to this article
View all access options for this article.
References
1.
Shih, T.T. and J. Opoku.Eng. Fract. Mech., 12:479 (1979).
2.
Katz, P.N.Nitrogen Ceramics, F. L. Riley, ed. p. 643, Nordoff , Leyden (1977).
3.
Godfrey, D.J.Proc. Br. Ceram. Soc., 22:1 (1973).
4.
Garnier, J.E., W.D.G. Boecker, C.H. McMurty and S. Calandra. "Electric-Discharge Machining of Silicon Carbide Based Materials," presented at the 89th Annual Meeting of the American Ceramic Society, Pittsburgh, PA, Paper No. 150-C-87 (April 26-30, 1987).
5.
Seshadri, S.G., J.E. Garnier and K.Y. Chia. "Effect of Machining Techniques on the Mechanical Properties of SiC/TiB2 Composites," presented at the 89th Annual Meeting of the American Ceramic Society, Pittsburgh, PA, Paper No. 149-C-87 (April 26-30, 1987).
Sharpe, W.N., Jr.Handbook on Experimental Mechanics, A. S. Kobayashi, ed. Chapter 13, Englewood Cliffs: Prentice Hall (1966).
9.
Jenkins, M.G. , A.S. Kobayashi, M. Sakai, K.W. White and R.C. Bradt. "Fracture Toughness Testing of Ceramics Using a Laser Interferometric Strain Gage," to be published in Am. Ceram. Soc. Bull. (1987).
10.
Pook, L.P.Int. J. Fract., 8:103 (1972).
11.
Munz, D.G., J.L. Shannon, Jr. and R.T. Bubsey.Int. J. Fract., 16:R137 (1980).
12.
Jenkins, M.G. , A.S. Kobayashi, K.W. White and R.C. Bradt. "A 3-D Finite Element Analysis of a Chevron-Notched, Three-Point Bend Fracture Specimen for Ceramic Materials," to be published in Int. J. Fract. (1987).
13.
Tada, H., P.C. Paris and G.R. Irwin.The Stress Analysis of Cracks Handbook, Del Research Corporation, Hellerton, PA (1973).
14.
Pabst, R.F.Fracture Mechanics of Ceramics, Vol. 2, R. C. Bradt, D. P. H. Hasselman and F. F. Lange, eds., New York:Plenum Press, p. 555 (1974).
15.
Munz, D., R.T. Bubsey and J.L. Shannon, Jr.J. Am. Ceram. Soc., 65:300 (1980).
16.
Nakayama, J.Jpn. J. Appl. Phys., 3:422 (1964).
17.
Tattersall, H.G. and G. Tappin.J. Mater. Sci., 1:296 ( 1966).
18.
Nakayama, J. , H. Abe and R.C. Bradt.J. Am. Ceram. Soc., 64:671 (1981).
19.
Jenkins, M.G. "Ceramic Crack Growth Resistance Determination Utilizing Laser Interferometry," PhD. Dissertation, University of Washington, Seattle, WA (1987 ).
20.
Zangvil, A.Personal communication, University of Illinois , Urbana, IL.
21.
Selsing, J.J. Am. Ceram. Soc., 44:419 (1961).
22.
Lange, F.F.Fracture Mechanics of Ceramics, Vol. 2, R. C. Bradt, D. P. H. Hasselman and F. F. Lange, eds., New York:Plenum Press, p. 599 (1974).
23.
Chia, K.Y. and S.G. Seshadri. "Sharp Crack Fracture Toughness Testing of Ceramics," presented at the 89th annual meeting of the American Ceramic Society , Pittsburgh, PA, Paper No. 162-C-87 (April 26-30, 1987).
