Material Damping in Aluminum and Metal Matrix Composites

Abstract

The material damping in beam-like specimens of aluminum and metal matrix com posites was measured. A unique apparatus to determine damping by free decay while the specimens are in free fall in a vacuum was used. The specimens tested include 2024-T3 and 6061-T4 aluminum, and unidirectional graphite/metal matrix specimens with P55 and P100 fibers and 6061 Aluminum and AZ91C Magnesium as matrix materials. Tests were conducted to determine the dependence of damping on frequency and stress level. For the aluminum specimens, the material damping followed the Zener model at very low stress levels. Below the Zener relaxation frequency, a strong dependence of damping on stress was found for even moderate stress levels. Damping for the aluminum matrix materials was slightly above that predicted by the Zener model for a homogeneous bar of the matrix aluminum. For the magnesium matrix specimens, damping significantly above the Zener prediction for the homogeneous matrix material was observed.

Get full access to this article

View all access options for this article.

References

Crawley, E.F. and D.G. Mohr "Experimental Measurement of Material Damping in Free Fall with Tunable Excitation." AIAA Journal , 23(1).125-131 (January 1985).

Sheen, R.F. and E.F. Crawley. "Experimental Measurement of Material Damping for Space Structures," Proceedings of the Vibration Damping Workshop, Long Beach, CA (February 1983 ).

Rawal, S. and M.S. Misra "Material Damping in Space Structures," Proceedings of the Vibration Damping Workshop II, Las Vegas, NV (March 1986).

Mohr, D.G. and E.F. Crawley. "Experimental Measurements of Material Damping of Aluminum and Graphite/Epoxy in Free-Fall with Tunable Excitation," M.I.T. Space Systems Laboratory Report #11-82 (June 1982 ).

Marquardt, D.W. 'An Algorithm for Least Squares Estimation of Nonlinear Parameters," Journal of the Society for Industrial and Applied Mathematics, 11(2) (June 1963).

Zener, C.M. Elasticity and Anelasticity of Metals, University of Chicago Press, Chicago, Illinois ( 1948).

McClintock, F.A. and A.S. Argon. Mechanical Behavior of Materials, Addision Wesley Publishing Company (1966).

Mason, W.P. Piezoelectric Crystals and their Applications to Ultrasonics, Van Nostrand (1950).

Mason, W.P. "Internal Friction and Fatigue in Metals at Large Strain Amplitudes ," Proceedings of the 9th International Conference on Applied Mechanics, Vol. 5, Brussels (1956).

10.

Lazan, B.J. "Damping Mechanisms and Phenomenology in Materials," Proceedings of the Eleventh International Congress of Applied Mechanics, Munich (1984).

11.

Niblett, D.H. and J. Wilkes. "Dislocation Damping in Metals ," Advances in Physics, 9(33) (January 1960).

12.

Granato, A. and K. Lucke. "Theory of Mechanical Damping Due to Dislocations," Journal of Applied Physics, 27(6) (June 1956).

13.

Granick, N. and J.E. Stern. "Material Damping of Aluminum by a Resonant-Dwell and Technique ," NASA TN D-2893 (August 1965).

14.

van Schoor, M.C. and E.F. Crawley. "Material Damping in Aluminum and Metal Matrix Materials ," MIT Space Systems Laboratory Report #10-85 (December 1984).