A general mathematical model wich allows for three dimensional flow, and one dimen sional consolidation of the composite, is developed. The model assumes that the fibers make up a deformable, nonlinear elastic network. The resin flow is modelled using Darcy's Law for an anisotropic porous medium, with a resin of time varying viscosity. The general case is then solved for two important molding situations: 1) Compression Mold ing, and 2) Bleeder Ply Molding.
Get full access to this article
View all access options for this article.
References
1.
Gutowski, T.G."A Resin Flow/Fiber Deformation Model for Composites,"SAMPE Quarterly, 16(4) (July 1985).
2.
Springer, G.S."Resin Flow During the Cure of Fiber Reinforced Composites,"J. Composite Mat'l., 16 (September 1982)
3.
Loos, A.C. and G S. Springer."Curing of Epoxy Matrix Composites,"J. Composite Mat'l , 17(March 1983).
4.
Loos, A.C. and G.S. Springer."Calculation of Cure Process Variables During Cure of Graphite/ Epoxy Composites," in Composite Mat'l, ASTM, STP 797, C. E. Browning, ed. (1982).
5.
Lmdt, J.T."Engineering Principles of the Formation of Epoxy Resin Composites,"SAMPE Quarterly (October 1982 ).
6.
Halpin, J.C. , J. L. Kardos and M.P. Dudukovic."Processing Science: An Approach for Prepreg Composite Systems,"Pure and Appl. Chem ., 55(5) ( 1983).
7.
Williams, J., T. Donnellan and R. Trabocco."A Predictive Model for Resin Flow During Composite Processing,"presented at 16th Nat. SAMPE (October 1984).
8.
Trabocco, R., J. Williams and T. Donnellan."Processing Graphite-Epoxy Composites Using the NADC Flow Model,"presented at the 30th Nat. SAMPE Sym . Anaheim, CA (1985).
9.
Bartlett, C.J."Use of the Parallel Plate Plastometer to Characterize Glass-Reinforced Resins: 1. Flow Model,"SPE Ann. Tech. Conf . (1978).
10.
Scheidegger, A.E."The Physics of Flow Through Porous Media,"U. Toronto Press, 3rd ed. (1974).
11.
Gibson, R.E. , G.L. England and M. J. L. Hussey."The Theory of One-Dimensional Consolidation of Saturated Clays,"Geotechnique, 17:261-273 (1967).
12.
Biot, M.A."Theory of Elasticity and Consolidation for a Porous Anisotropic Solid,"J. Applied Physics, 26(1) (February 1955).
13.
Kingery, J."Composite Process Modeling: Consolidation of Aligned Fiber Assemblies," S. M. Thesis, Dept. of Mech. Eng. MIT (June 1985).
Wineman, S."Viscous Flow Through Algined Graphite Fibers in Compression," S. B. Thesis , Dept. of Mech. Eng. MIT (June 1985 ).
16.
Bloechle, D.P."Use of the Parallel Plate Plastometer to Characterize Glass-Reinforced Resins: 2. Experimental Results for B-Staged Epoxy Materials,"SPE Ann. Tech. Conf. (1978).
17.
Mallett, L."Microcomputer Based Control of Composite Curing," S. M. Thesis, Dept. of Mech. Eng. MIT (June 1985).
18.
Gutowski, T. G., S. Wineman and Z. Cai."Applications of the Resin Flow/Fiber Deformation Model,"31st SAMPE Proceedings, Las Vegas (April 1986).
19.
Timoshenko, S.P. and J. N. Goodier.Theory of Elasticity, McGraw-Hill, 3rd ed. (1934 ).
Taylor, D.W.Fundamentals of Soil Mechanics, John Wiley (1948).
22.
Scott, R.F.Principles of Soil Mechanics, Addison-Wesley (1963).
23.
Rohsenow, W.M. and H. Choi, Heat, Mass and Momentum Transfer, Prentice-Hall (1961).
24.
Kardos, J., M.P. Dudukovic, E.L. McKague and M.W. Lehman, "Void Formation and Transport During Laminate Processing: An Imtial Model Framework," in Composite Mat'ls. ASTM STP 797 , C. E. Browing, ed. (1982).
25.
Browning, C.E., R.A. Brand, E.L. McKague, J.L. Kardos and M.P. Dudukovic."Processing Science of Epoxy Resin Composites,"Industrial Review, General Dynamics Convair Division, San Diego, CA (October 26, 1983).
Gutowski, T.G. , J. Kingery and D. Boucher."Experiments in Composites Consolidation: Fiber Deformation,"SPE Ann. Tech. Conf. Proceeding, Boston (May 1986).
