The stress field in a coated continuous fiber composite subjected to thermo- mechanical loadings is calculated by use of four concentric circular cylinders model. The target material is Ni- or SiC- coated graphite fiber/6061 Aluminum composite. Ni coating is found to be advantageous over SiC-coating from the crack resistance view point.
Get full access to this article
View all access options for this article.
References
1.
Mikata, Y. and Taya, M., "The Stress Field in and Around a Coating in a Coated Short Fiber Composite Subjected to Uniaxial and Biaxial Loading,"J. Appl. Mech., Vol. 52, pp. 19-24 (1985).
2.
Mikata, Y. and Taya, M., "Thermal Stresses in a Coated Short Fiber Composite," submitted for publication.
3.
Ishikawa, T. , Koyama, K. and Kobayashi, S., "Thermal Expansion Coefficients of Unidirectional Composites,"J. Comp. Mater., Vol. 12, pp. 153-168 (1978).
4.
Uemura, M., Iyama, H. and Yamaguchi, Y., "Thermal Residual Stresses in Filament-Wound Carbon-Fiber-Reinforced Composites,"J. Thermal Stress, Vol. 2, pp. 393-412 (1979).
5.
Iesan, D., "Thermal Stresses in Composite Cylinders,"J. Thermal Stress, Vol. 3, pp. 495-508 (1980).
6.
Christensen, R.M. and Lo, H., "Solutions for Effective Shear Properties in Three-Phase Sphere and Cylinder Models,"J. Mech. Phys. Solids, Vol. 27, pp. 315-330 (1979).
7.
Takeuchi, Y., Furukawa, T. and Tanigawa, Y., "The Effect of Thermoelastic Coupling for Transient Thermal Stresses in a Composite Cylinder," ASME, WAM, DE-2 (1983).
8.
Eshelby, J.D. , "The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems,"Proceedings of the Royal Society, London, Series, A, Vol. 241, pp. 376-386 (1957).
9.
Eshelby, J.D. , "The Elastic Field Outside an Ellipsoidal Inclusion,"Proceedings of the Royal Society , London, Series A, Vol. 252, pp. 561-569 (1959).
10.
Elliott, H.A. , "Three-Dimensional Stress Distributions in Hexagonal Aeolotropic Crystals,"Proc. Camb. Phil. Soc., Vol. 44, pp. 552-533 (1948).
11.
Metcalfe, A.G. and Klein, M.J., "Effect of the Interface on Longitudinal Tensile Properties," in Composite Materials , Vol. 1, edited by Metcalfe, et. al., Academic Press, pp. 125-168 (1974).
12.
Ochiai, S. and Murakami, Y., "Tensile Strength of Composites with Brittle Reaction Zones at Interfaces,"J. Mater. Sci., Vol. 14, pp. 831-840 (1979).
13.
Ishikawa, H. , Chou, T.W. and Taya, M., "Prediction of Failure Modes in Unidirectional Short-Fibre Composites,"J. Mater. Sci., Vol. 17, pp. 832-842 (1982).
14.
Hoffman, R.W. , Physics of Thin Films, Vol. 3, edited by R. W. Hoffman, Academic Press , pp. 211-280 (1966).
