Tsai, S.W. and Wu, E.M., "A General Theory of Strength for Anisotropic Materials,"J. Composite Materials, Vol. 5, pp. 58-80 (1971).
2.
Puppo, A.H. and Evensen, H.A., "Strength of Anisotropic Materials under Combined Stresses,"AIAA Journal, Vol. 10, pp. 468-474 (1972).
3.
Kaminski, B.E. and Lantz, R.B., "Strength Theories of Failure for Anisotropic Materials,"Composite Materials: Testing and Design, ASTM STP 460, American Society for Testing and Materials , pp. 160-169 (1969).
4.
Gol'denbalt, I.I. and Kopnov, V.A., "Strength of Glass-Reinforced Plastics in the Complex Stress State,"Polymer Mechanics , Vol. 1, pp. 54-59 (1965).
5.
Eckold, G.C. , Leadbetter, D., Soden , P.D. and Griggs, P.R., "Lamination Theory in Prediction of Failure Envelopes for Filament Wound Materials Subjected to Biaxial Loading,"Composite, Vol. 9, pp. 243-246 (1978).
6.
Wu, E.M., "Phenomenological Anisotropic Failure Criterion,"Mechanics of Composite Materials, Edited by Sendeckyj, G. P., Vol. 2, pp. 353-431, Academic Press, New York (1974).
7.
Choo, Vincent K. S. and Hull, D., "Influence of Radial Compressive Stress Owing to Pressure on the Failure Mode of Composite Tube Specimens,"J. Composite Materials, Vol. 17, pp. 344-356 (1983).
8.
Hull, D., Legg, M.J. and Spencer, B., "Failure of Glass/Polyester Filament Wound Pipe,"Composites, Vol. 9, pp. 17-24 (1978).
9.
Choo, Vincent K. S., "Multiaxial Testing of Fibre Reinforced Composite Materials,"Liverpool University PhD Thesis (1982).
10.
Choo, Vincent K. S., "Design and Construction of a Feedback Control System for a Servo-hydraulic Multiaxial Test Rig,"Journal of Microcomputer Applications, 6, pp. 181-197 (1983).
11.
Sauer, J.A. and Pae, K.D., "Mechanical Properties of High Polymers,"Introduction to Polymer Science and Technology, ed. H. S. Kaufman & J. J. Falcetta, ch 7, John Wiley & Sons, New York, New York (1977).
