Microwave Curing of Composites

Abstract

A model was developed which describes the microwave curing process of continuous fiber reinforced organic matrix composites. On the basis of the model, a computer code was developed which provides the temperature distribution, the resin viscosity, the degree of cure of the resin, and the resin contents of the composite and the bleeder during microwave curing of flat plate composites. In addition, the computer code gives the void sizes and the residual stresses after the cure. Tests were conducted using a microwave oven measuring the temperature distribution inside Fiberite S2/9134B glass epoxy composites, and the temperature distribution inside and resin flow out of Hercules AS/3501-6 graphite epoxy composites. The data were compared with results calculated with the computer code for the conditions employed in the tests, and good agreements were found between the data and the numerical results. Parametric studies were also performed to illustrate how the model and associated computer code can be used to determine the appropriate microwave cure cycle which results in a composite that is cured uniformly and in the shortest amount of time.

Get full access to this article

View all access options for this article.

References

Williams, N.H. , "Curing Epoxy Resin Impregnated Pipe at 2450 MHz," Journal of Microwave Power, 2, pp. 123-127 (1967).

Wilson, L.K. , and Salerno, J.P. , "Microwave Curing of Epoxy Resins," AVRADCOM Report No. 78-46 ( 1978).

Gourdenne, A. , Massarani, A.-H. , Monchaux, P. , Aussudre, S. , and Thourel, L. , "Crosslinking of Thermosetting Resins by Microwave Heating: Quantitative Approach," American Chemical Society, Division of Polymer Chemistry, Polymer Preprints , 20, pp. 471-474 (1979).

Strand, N.S. , "Microwave Curing of Thermoset Resins," Society of Manufacturing Engineers Technical Paper EM79-368 (1979 ).

Gourdenne, A. , Monchaux, P. , Le Van , Q. , Aussudre, S. , Thourel, L. , Audo, N. , and Nedelec, J. , "Utilisation du Chauffage Dielectrique Micro-Ondes Pour La Preparation de Composites Epoxy-Verre et Epoxy-Graphite: Aspects Theoretiques et Practiques," in Proceedings of the Third International Congress of Composite Materials, Volume 2, pp. 1514-1520, Paris, France ( 1980).

Gourdenne, A. , and Le Van, Q. , "Intimate Study of the Microwave Curing," American Chemical Society, Division of Polymer Chemistry, Polymer Preprints, 22 , pp. 125-127 (1981).

Haven, R.E. , "New Approach to the High Frequency Electric Field Curing of Polymeric Composites," Ph.D. Thesis, Department of Mechanical Engineering, MIT (1980).

Lee, W.I. , "Microwave Curing of Composites," Ph.D. Thesis The University of Michigan (1983).

Lee, W.I. , and Springer, G.S. , "Interaction of Electromagnetic Radiation with Organic Matrix Composites," Journal of Composite Materials, Vol. 18, pp. 357-386 (1984).

10.

Arpaci, V.S. , Conduction Heat Transfer, Addison-Wesley (1966).

11.

Lee, W.I. , Loos, A.C. , and Springer, G.S. , "Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin," Journal of Composite Materials , 16, pp. 510-520 (1982).

12.

Loos, A.C. , and Springer, G.S. , "Curing of Epoxy Matrix Composites," Journal of Composite Materials, 17 , pp. 135-169 (1983).

13.

Loos, A.C. , and Springer, G.S. , "Curing of Graphite/Epoxy Composites," AFWAL-TR-83-4040 ( 1983 ).

14.

Tsai, S.W. , and Hahn, H.T. , Introduction to Composite Materials Technomic Publishing Co. (1980).

15.

von Hippel, A.R. , Dielectric Materials and Applications , MIT Press (1966).

16.

Hercules Incorporated, Aerospace Division, "Magnamite Graphite Fiber Presentation," Magna, Utah (received 1981).