Experimental Determination of the In Situ Transverse Lamina Strength in Graphite/Epoxy Laminates

Abstract

The uniaxial tensile load at which transverse cracking initiated in the 90 deg. laminae of (0₂/90 _n ) _s , (±30/90 _n ) _s and (±60/90 _n ) _s , n =1,2,4,8, T300/934 composite laminates was determined experimentally using DIB enhanced x-radiography. "In situ" transverse strengths of the 90 deg. laminae corresponding to these loads were then calculated based upon lamination theory predictions including the effects of residual thermal stresses. These in situ strengths, which were as high as 2.5 times the unidirec tional transverse strength, were found to depend strongly on both the 90 deg. laminae thickness and orientation of adjacent laminae suggesting that transverse strength should not be considered as an intrinsic lamina property.

Get full access to this article

View all access options for this article.

References

Tsai, S.W. , and V.D. Azzi , "Strength of Laminated Composite Materials", AIAA J . Vol. 4, No. 2, Feb. 1966, p. 296.

Sandhu, R.S. , "A Survey of Theories of Failure of Isotropic and Anisotropic Materials" , AFFDL TR-72-71, 1972.

Wu, E.M. and J.K. Scheublein , "Laminate Strength — A Direct Characterization Procedure", Composite Materials: Testing and Design, ASTM STP 546, 1974, p. 188.

Narayanaswami, R. and H.M. Adelman , "Evaluation of the Tensor Polynomial and Hoffman Strength Theories for Composite Materials" J. Comp. Matls., Vol. 11, Oct. 1977, p. 366.

Tennyson, R.C. , D. MacDonald and A.P . Nanyaro , "Evaluation of the Tensor Polynomial Failure Criterion for Composite Materials", J. Comp. Matls., Vol. 12, Jan. 1978, p. 63.

Tennyson, R.C. , "Application of the Cubic Strength Criterion to the Failure Analysis of Composite Structures" NASA CR-165712, May 1981.

Sun, C.T. and S.E. Yamada , "Strength Distribution of a Unidirectional Fiber Composite" J. Comp. Matls., Vol. 12, Apr. 1978, p. 169.

Chamis, C.C. and T.L. Sullivan , "In Situ Ply Strength: An Initial Assessment" , NASA TM-73771, 1978.

Eselun, S.A. , H.D. Neubert and E.G. Wolff , "Microcracking Effects on Dimensional Stability", Proc. 24th National SAMPE Symposium, San Francisco, CA, May 1979, p. 1299.

10.

Parvizi, A. , K.W. Garrett and J.E . Bailey , "Constrained Cracking in Glass Fiber-Reinforced Epoxy Cross-Ply Laminates", J. Matls. Sci., Vol. 13, 1978, p. 195.

11.

Bader, M.G. , J.E. Bailey , P.T. Curtis and A. Parvizi , "The Mechanisms of Initiation and Development of Damage in Multi-axial Fibre-Reinforced Plastic Laminates", Proc. 3rd Int. Symp. Mech. Behavior of Matls., Cambridge, U.K ., Vol. 3, 1979, p. 227.

12.

Wang, A.S.D. and F.W. Crossman , "Initiation and Growth of Transverse Cracks and Edge Delaminations in Composite Laminates, Part 1. An Energy Method" , J. Comp. Matls. Supplement , Vol. 14, 1980, p. 71.

13.

Wang, A.S.D. , "Growth Mechanisms of Transverse Cracks and Ply Delaminations in Composite Laminates" Proc. 3rd Int. Conf. on Composite Matls. , Paris, France, Aug. 1980, p. 170.

14.

Crossman, F.W. and A.S.D. Wang , "The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates" Damage in Composite Materials, ASTM STP-775, 1982.

15.

Bader, M.G. and P.T. Curtis , "The Micromechanics of Fibre Composites — Carbon Fibre Programme" , First Report Agreement A93B/25, Dept. of Metallurgy and Materials Technology, Univ. of Surrey, U.K., July 1977.

16.

Francis, P.H. , D.E. Walrath and D.N . Weed , "Investigation of First Ply Failure in Graphite/Epoxy Laminates Subjected to Biaxial Static and Fatigue Loadings", AFML-TR-77-62, June 1977.

17.

McLaughlin, P.V. , A. Dasgupta , and Y.W . Chun , "BILAM — A Composite Laminate Failure Analysis Code Using Bilinear Stress-Strain Approximations" , Lawrence Livermore Laboratory UCRL-15371 , October 1980.

18.

Griffith, A.A. , "The Theory of Rupture", Proc. First International Congress on Applied Mechanics, Delft, Holland , 1924, p. 55.

19.

Aveston, J. and A. Kelly , "Theory of Multiple Fracture of Fibrous Composites", J. Matls. Sci., 8, 1973, p. 352.

20.

Schapery, R.A. , "Research on Composite Materials for Structural Design", Proc. Mechanics of Composite Review, Dayton, OH, Oct. 1981, p. 51.

21.

Rodini, B.T. and J.R. Eisenmann , "An Analytical and Experimental Investigation of Edge Delamination in Composite Laminates" Proc. 4th Conf. Fibrous Composites in Structural Design, San Diego, CA, Nov. 1978, p. 441.