K.L. Reifsnider, W.W. Stinchcomb, R.S. Williams, and L.A. Marcus, "Heat Generation in Composite Materials During Fatigue Loading," Technical Report AFOSR-TR-73-1961, May 1973.
2.
F.H. Chang, D.E. Gordon, and A.H. Gardner, "A Study of Fatigue Damage in Composites by Nondestructive Testing Techniques,"ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis, Eds., 1977, pp. 57-72.
3.
J.J. Nevadunsky , J.J. Lucas, and M.J. Salkind, "Early Fatigue Damage Detection in Composite Materials"Journal of Composite Materials , Vol. 9 October 1975, pp. 394-407.
4.
R.M. Collins , "NDI Policy and Techniques for Advanced Composites," Proceedings, 11th National SAMPE Technical Conference, November 1979, pp. 178-191.
5.
A. Vary, "A Review of Issues and Strategies in Nondestructive Evaluation of Fiber Reinforced Structural Composites," Proceedings 11th National SAMPE Technical Conference, November 1979, pp. 167-177.
6.
R.S. Williams, and K.L. Reifsnider , "Characterization of Acoustic Emission During Fatigue Loading of Composite Specimens," AFOSR-TR-74-1200, May 1974.
7.
D.M. Egan and J.H. Williams, Jr., "Acoustic Emission Spectral Analysis of Fiber Composite Failure Mechanisms,"NASA CR-2938, January 1978.
8.
R.K. Erf, Editor, Holographic Nondestructive Testing , Academic Press, New York, New York , 1974.
9.
K.L. Reifsnider , E.G. Henneke II, and W.W. Stincomb, "Delamination in Quasi-Isotropic Graphic-epoxy Laminates,"ASTM STP 617 , 1977, pp. 93-105.
10.
R.B. Pipes , B.E. Kaminski and N.J. Pagano, "Influence of the Free Edge on the Strength of Angle-Ply Laminates,"ASTM STP 521, 1973, pp. 218-228.
11.
E.F. Rybicki , D.W. Schmueser and J. Fox, "An Energy Release Rate Approach for Stable Crack Growth in the Free-Edge Delamination Problem,"Journal of Composite Materials, cVol. 11, October 1977, pp. 470-487.
12.
H.T. Hahn and R.Y. Kim, "Fatigue Behavior of Composite Laminate,"Journal of Composite Materials , Vol. 10, April 1976, pp. 156-180.
13.
J.P. Fanucci, "Damage Initiation and Propagation During Compressive Fatigue of Flawed Graphite/Epoxy Composites," Doctoral Thesis, Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, September 1980.
14.
A.J. Durelli and V.J. Parks, Moire Analysis of Strain, Prentice-Hall, Inc. Englewood Cliffs, New Jersey, 1970.