Abstract
In this work, the features of the fracture surfaces of graphite-epoxy specimens as seen by both optical and scann ing electronic microscope (SEM) are presented. A variety of test conditions were investigated. They are: tension (quasi- static), compression (quasi-static), and tension-tension fatigue. Failure due to delamination was also studied (Mode I-Peel Testing). The sequence of events leading to failure was monitored using an X-ray technique with an opaque additive for image enhancement. After mechanical testing, specimens were sectioned and prepared for microscopic analysis. Two principal fracture surface features were identified: (1) overlapping platelets of epoxy and (2) branched microcrack structures. These fatures could be used to identify the direc tion of failure propagation and, in some cases, distinguish between failure modes.
Get full access to this article
View all access options for this article.