Effects of Hydrostatic Stress on the Yielding of Cold Rolled Metals and Fiber-Reinforced Composites

Abstract

Get full access to this article

View all access options for this article.

References

Schmid

and Boas

Plasticity of Crystals, Hughes and Co. (1950),p. 125, 152.

Taylor

G. I.

“Plastic Strain in Metals,” J. of the Institute of Metals, Vol. 62, No. 1 (1938),p. 307.

Taylor

G. I.

and Elam

C. F.

“The Distortion of an Aluminum Crystal During a Tensile Test,” Proc. Roy. Soc., Vol. 102A (1923),p. 647.

Lin

T. H.

“Physical Theory of Plasticity,” Advances in Applied Mechanics, Vol. 11, Academic Press(1971),p. 255.

Barrett

C. S.

Structure of Metals, McGraw-Hill (1952),p. 345.

Bridgman

P. W.

Metals Technology Pub. 1782 (1944).

von Mises

, Gottingen Nachnichten, Math. Phys. Klasse (1913),p. 382.

Hencky

“Zur Theorie Plastischen Deformationen und der hierdurch in Material heirogerfenen Nachspannunger,” Zeits ang Math. Mech., Vol. 4 (1924),p. 323.

Taylor

G. I.

and Quinney

“The Plastic Distortion of Metals,” Phil. Trans. Roy. Soc. (London), Vol. 230 (1921),p. 323.

10.

Taylor

G. I.

“The Mechanism of Plastic Deformation of Crystals,” Proc. Roy. Soc. London, Vol. 145 (1934), pp. 362–87.

11.

Hill

The Mathematical Theory of Plasticity, Clarendon Press (1950),p. 33, 318.

12.

Calcote

L. R.

The Analysis of Laminated Composite Structures. Van Nostrand Reinhold Company, (1969), pp. 153–158.

13.

Lin

T. H.

Salinas

and Ito

Y. M.

“Elastic-Plastic Analysis of Unidirectional Composites,” J. Composite Materials. Vol. 6 (1972),p. 48.

14.

Yamada

Yoshimura

and Sakurai

“Plastic Stress-Strain Matrix and Its Application for the Solution of Elastic-Plastic Problems by the Finite Element Method,” Inter. J. Mech. Sci., Vol. 10, No. 5 (1968),p. 343.

15.

Lin

T. H.

Salinas

and Ito

Y. M.

“Initial Yield Surface of a Unidirectionally Reinforced Composite,” J. of Applied Mechanics, Paper No. 71-APMW-21.