Fracture Mechanics Approach to Adhesive Joints

Abstract

This study investigates the problem of applying fracture mechanics to the opening mode fracture of a two-material (aluminum-epoxy-aluminum) system. The results of a finite element analysis of a two-material, single- edge-notch (SEN) plate are used with a compliance method in order to obtain strain energy rates, g, and with a displacement method to obtain stress intensity factors, K. Approximate relationships between the homo geneous system and the adhesive system for both K and g are determined. The relationship between K and g for the adhesive system is obtained. The experimental investigation provides an experimental compliance calibration for the same adhesive system and loading. Good reproducibility of the fracture toughness values obtained for the two-material system with SEN and tapered DCB specimens indicates the geometry independence of the fracture toughness. The effect of the notch root radius and proper specimen preparation are also considered.

Get full access to this article

View all access options for this article.

References

S. Mostovoy and E.J. Ripling , "Fracture Toughness of an Epoxy System," J. Applied Polymer Science, Vol. 10 (1966), p. 1351.

E.J. Ripling , S. Mostovoy and R.L. Patrick , "Application of Fracture Mechanics to Adhesive Joints," ASTM STP No. 360, Symposium on Recent Developments in Adhesion Science, (1963).

E.J. Ripling , S. Mostovoy and R.L. Patrick , "Measuring Fracture Toughness of Adhesive Joints," Materials Research and Standards, ASTM, Vol. 4 (March, 1964).

S. Mostovoy and E.J. Ripling , "Influence of Water on Stress Corrosion Cracking of Epoxy Bonds," J. Applied Polymer Science, Vol 13. ( 1969), p. 1083.

S. Mostovoy , C. Bersch and E.J. Ripling , "Fracture Toughness of Adhesive Joints," National SAMPE Technical Conference, Aerospace Adhesives and Elastomers, Dallas, October 6-8, 1970, Vol. 2 (1970). p. 273.

O.C. Zienkiewicz , The Finite Element Method in Structural and Continuum Mechanics, McGraw-Hill, (1967).

S.K. Chan , I.S. Tuba and W.K. Wilson , "On the Finite Element Method in Linear Fracture Mechanics," Engineering Fracture Mechanics, Vol. 2 (1970), p. 1.

A.S. Kobayashi , D.E. Maiden , B.J. Simon and S. Iida , "Application of Finite Element Analysis Method to Two-Dimensional Problems in Fracture Mechanics," ASME Paper No. 69-WA/PVP-12, (1969).

J.P. Gallagher , "Experimentally Determined Stress Intensity Factors for Several Contoured Double Cantilever Beam Specimens," Engineering Fracture Mechanics, Vol. 3 (1971), p. 27.

10.

E. Gross , J.E. Srawley and W.F. Brown "Stress-Intensity Factors for a Single-Edge-Notch Tension Specimen by Boundary Collocation of a Stress Function," NASA TN D-2395, ( 1964).

11.

G.R. Irwin , "Trends in Fracture Mechanics," ASM Fracture Control Conference, Philadelphia, Pennsylvania, January, 1970.

12.

C.E. Feltner , "On the Mechanical Behavior and Fracture Morphology of Epoxy Resin," University of Illinois, T&AM Report No. 224, (August 1962).