A theoretical elastic solution for filament-wound cylinders with any number of layers and any uniform configuration in each layer is presented. The cylinder may have axial, torsional, or pressure loads or any combination of these loads and includes thick-wall cylinders.
Get full access to this article
View all access options for this article.
References
1.
V.C. Cutler, "Bending Analysis of Directionally Reinforced Plastic Pipe," The Society of Plastic Industry, Inc., 16th Annual Technical And Management Conference, Reinforced Plastics Division (1961).
2.
R.E. Sherrer, "Effect of Resin Properties on Filament-Wound Cylinders," Boeing Company Document No. D2-125193-1 (1966).
3.
W.B. Rosen, N.F. Dow, and Z. Hashin, "Mechanical Properties of Fibrous Composites," Contract NASA 470, NASA Contractor Report, General Electric Company, Philadelphia, Pa. (1964).
4.
Z. Hashin, and W.B. Rosen, "The Elastic Moduli of Fiber-Reinforced Materials," Journal of Applied Mechanics, (1964), p. 223.
5.
R.Y. Bodine, "Some Elasticity Problems for an Anisotropic Solid, University of Wisconsin, Ph.D. Thesis (1961).
6.
R.E. Sherrer, and C.W. Harter, "Filament-Wound Cylinders under Axial, Torsional and Pressure Loads ," Boeing Company Document No. D2-23221 (1964).
7.
S. Timoshenko, and J.N. Goodier, Theory of Elasticity, McGraw-Hill Book Co., New York (1951).
8.
Allen M. Shibley, "A Survey of Filament Winding: Materials, Design Criteria, Military Applications," Plastics Technical Evaluation Center, Picatinny Arsenal, Dover, New Jersey (1962).
