Abstract
Phase-change granular actuators combine the high volumetric expansion and actuation stress of bulk phase-change systems with the tunable properties of granular materials. One form of these actuators utilizes microcapsule grains made from an elastic matrix encapsulating multiple solvent cores, where phase changes from liquid to gas drive volumetric expansion. Previous work demonstrated grain expansions up to 700%, though material selection was not optimized. This study explores how shell and core material choices affect the synthesis and performance of phase-change granular actuators. We identify specific combinations of solvents and silicone matrices that influence encapsulation efficiency, grain morphology, and processing requirements. Results show that increasing shell stiffness and core solvent boiling point raises actuation temperatures, while softer shells enable greater volumetric expansions. Overall, tuning the material composition allows for control of actuation metrics.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
