Three-dimensional (3D) woven fabrics have emerged as an effective structure for ballistic protection due to their flexibility, multi-impact resistance, and ability to form complex shapes. However, the influence of different 3D fabric architectures on ballistic performance is not fully understood. This study investigates the ballistic response of three types of 3D angle-interlock woven fabrics (3DTAWF, 3DSSWF, 3DSBWF) using numerical simulations with experimentally validated material models. Full-scale fabric models enable examining the dynamic behavior at the yarn level. Results show 3DSBWF exhibits the best ballistic performance with higher ballistic limit and energy absorption compared to 3DTAWF and 3DSSWF. Damage evolution indicates 3DSBWF and 3DSSWF have better structural integrity during penetration. The higher warp density and straighter warp path contribute to balanced warp-weft energy absorption and improved impact resistance in 3DSBWF. This study elucidates the role of 3D fabric structure on energy absorption patterns and failure morphology. The findings provide valuable insights into 3D woven fabric designs for optimizing ballistic protection performance.
CuongH-MImadABoussuF, et al.Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact. Int J Impact Eng2016; 88: 91–101. DOI: 10.1016/j.ijimpeng.2015.08.011.
2.
HuJ. 3-D fibrous assemblies: properties, applications and modelling of three-dimensional textile structures. Amsterdam, Netherlands: Elsevier, 2008.
3.
YangDWeiQSChenXG, et al.Investigation of ballistic performance on 3D compound structure fabric by finite element analysis. Textil Res J2022; 92: 1782–1795.
4.
Ha-MinhCBoussuFKanitT, et al.Effect of frictions on the ballistic performance of a 3D warp interlock fabric: numerical analysis. Appl Compos Mater2011; 19: 333–347. DOI: 10.1007/s10443-011-9202-2.
5.
Ha-MinhCKanitTBoussuF, et al.Numerical multi-scale modeling for textile woven fabric against ballistic impact. Comput Mater Sci2011; 50: 2172–2184. DOI: DOI: 10.1016/j.commatsci.2011.02.029.
6.
WeiQChenJYangD, et al. Influence of clamping methods on the ballistic performance of 3D shallow straight-joint woven fabrics. Textil Res J2024. DOI: 10.1177/00405175241239347.
7.
LuanKSunBGuB. A multi-scale geometrical model for finite element analyses of three-dimensional angle-interlock woven composite under ballistic penetration. Comput Model Eng Sci2011; 79: 31–61.
8.
YangYLiuYXueS, et al.Multi-scale finite element modeling of ballistic impact onto woven fabric involving fiber bundles. Compos Struct2021; 267: 113856. DOI: 10.1016/j.compstruct.2021.113856.
9.
WeiQYangDGuB, et al.Numerical and experimental investigation on 3D angle interlock woven fabric under ballistic impact. Compos Struct2021; 266: 113778. DOI: 10.1016/j.compstruct.2021.113778.
10.
TapieEGuoYBShimVPW. Effect of pre-tension on energy absorbed by fabric during projectile penetration. Int J Impact Eng2018; 121: 134–150. DOI: 10.1016/j.ijimpeng.2018.07.008.
11.
ZahidBChenX. Manufacturing of single-piece textile reinforced riot helmet shell from vacuum bagging. J Compos Mater2012; 47: 2343–2351. DOI: 10.1177/0021998312457703.
12.
ChenXLoWYTayyarAE, et al.Mouldability of angle-interlock woven fabrics for technical applications. Textil Res J2002; 72: 195–200. DOI: 10.1177/004051750207200302.
13.
PereraYSMuwanwellaRMHWFernandoPR, et al.Evolution of 3D weaving and 3D woven fabric structures. Fashion and Textiles2021; 8: 11. DOI: 10.1186/s40691-020-00240-7.
14.
XiaogangCDanY. Use of 3D angle-interlock woven fabric for seamless female body armor: Part 1: ballistic evaluation. Textil Res J2010; 80: 1581–1588. DOI: 10.1177/0040517510363187.
15.
TabieiANilakantanG. Ballistic impact of dry woven fabric composites: a review. Appl Mech Rev2008; 61: 010801.
16.
ChenXSpolaMPayaJG, et al.Experimental studies on the structure and mechanical properties of multi-layer and angle-interlock woven structures. J Text Inst1999; 90: 91–99. DOI: 10.1080/00405009908658693.
17.
AbtewMABoussuFBruniauxP, et al.Forming characteristics and surface damages of stitched multi-layered para-aramid fabrics with various stitching parameters for soft body armour design. Compos Appl Sci Manuf2018; 109: 517-537. DOI: 10.1016/j.compositesa.2018.02.037.
18.
ChenXPotiyarajP. CAD/CAM of orthogonal and angle-interlock woven structures for industrial applications. Textil Res J1999; 69: 648–655. DOI: 10.1177/004051759906900905.
19.
AbtewMABoussuFBruniauxP, et al.Engineering of 3D warp interlock p-aramid fabric structure and its energy absorption capabilities against ballistic impact for body armour applications. Compos Struct2019; 225: 111179. DOI: 10.1016/j.compstruct.2019.111179.
20.
WuHHuangCGuoR, et al.Influences of clamping methods and weaving architectures on the ballistic performance of 3D orthogonal woven fabrics. Compos Struct2023; 319: 117088. DOI: 10.1016/j.compstruct.2023.117088.
21.
WeiQGuBSunB. Ballistic penetration damages and energy absorptions of stacked cross-plied composite fabrics and laminated panels. Int J Damage Mech2020; 29: 1465–1484. DOI: 10.1177/1056789520927074.
22.
MaPJinLWuL. Experimental and numerical comparisons of ballistic impact behaviors between 3D angle-interlock woven fabric and its reinforced composite. J Ind Textil2019; 48: 1044–1058. DOI: 10.1177/1528083718754903.
23.
WeiQYangDGaoB. Ballistic penetration simulation of a 3D woven fabric using high strain-rate dependent yarn model. J Text Inst2021; 113: 1–10. DOI: 10.1080/00405000.2021.1929706.
24.
SockalingamSChowdhurySCGillespieJW, et al.Recent advances in modeling and experiments of Kevlar ballistic fibrils, fibers, yarns and flexible woven textile fabrics – a review. Textil Res J2017; 87: 984–1010. DOI: 10.1177/0040517516646039.
25.
AbtewMABoussuFBruniauxP, et al.Ballistic impact mechanisms – a review on textiles and fibre-reinforced composites impact responses. Compos Struct2019; 223: 110966. DOI: 10.1016/j.compstruct.2019.110966.
26.
AbtewMABoussuFBruniauxP, et al.Ballistic impact performance and surface failure mechanisms of two-dimensional and three-dimensional woven p-aramid multi-layer fabrics for lightweight women ballistic vest applications. J Ind Textil2019; 50: 1351–1383. DOI: 10.1177/1528083719862883.
27.
WeiQYangDGuB, et al.Numerical analysis of strain rate effect on ballistic impact response of multilayer three dimensional angle-interlock woven fabric. Int J Damage Mech2021; 30: 923–944. DOI: 10.1177/1056789520983598.
28.
BoussuFCristianINaumanS. General definition of 3D warp interlock fabric architecture. Compos B Eng2015; 81: 171–188. DOI: 10.1016/j.compositesb.2015.07.013.
29.
YangYWangZWangM, et al.FE modeling of woven fabric at the fiber bundle level under ballistic impact. Textil Res J2023; 93: 00405175221146691. DOI: 10.1177/00405175221146691.
30.
NilakantanGNuttS. Effects of ply orientation and material on the ballistic impact behavior of multilayer plain-weave aramid fabric targets. Defence Technology2018; 14: 165–178. DOI: 10.1016/j.dt.2018.01.002.
31.
GuBBallistic penetration of conically cylindrical steel projectile into plain-woven fabric target – a finite element simulation. J Compos Mater2004; 38: 2049–2074. DOI: 10.1177/0021998304044776.
32.
ChocronSFigueroaEKingN, et al.Modeling and validation of full fabric targets under ballistic impact. Compos Sci Technol2010; 70: 2012–2022. DOI: 10.1016/j.compscitech.2010.07.025.
33.
WeiQYangDPanZ. Numerical study on the effects of oblique impact on the ballistic behavior of 3D angle interlock woven fabric. Int J Damage Mech2023; 32: 10567895231187672. DOI: DOI: 10.1177/1056789523118767.
MaDWangZGiglioM, et al.Influence of strain-rate related parameters on the simulation of ballistic impact in woven composites. Compos Struct2022; 300: 116142. DOI: 10.1016/j.compstruct.2022.116142.
36.
MamivandMLiaghatGH. A model for ballistic impact on multi-layer fabric targets. Int J Impact Eng2010; 37: 806–812. DOI: 10.1016/j.ijimpeng.2010.01.003.
37.
LuanKGuBH. Energy absorption of three-dimensional angle-interlock woven composite under ballistic penetration based on a multi-scale finite element model. Int J Damage Mech2015; 24: 3–20. DOI: 10.1177/1056789514520800.
38.
TurnerPLiuTZengX, et al.Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Compos Struct2018; 185: 483–495. DOI: 10.1016/j.compstruct.2017.10.091.
39.
JiaXSunBGuB. A numerical simulation on ballistic penetration damage of 3D orthogonal woven fabric at microstructure level. Int J Damage Mech2011; 21: 237-266. DOI: 10.1177/1056789510397078.
40.
TripathiLChowdhurySBeheraBK. Modeling and simulation of impact behavior of 3D woven solid structure for ballistic application. J Ind Textil2020; 51: 6065S–6086S. DOI: 10.1177/1528083720980467.
41.
BilisikK. Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: a review. Textil Res J2016; 87: 2275–2304. DOI: 10.1177/0040517516669075.
42.
YangDWeiQXinB, et al.Research on the creation of TA/LOI compound structure fabric and its ballistic performance for 3D curved-surface ballistic application. Compos B Eng2020; 201: 108275. DOI: 10.1016/j.compositesb.2020.108275.
43.
YangYChenX. Influence of fabric architecture on energy absorption efficiency of soft armour panel under ballistic impact. Compos Struct2019; 224: 111015. DOI: 10.1016/j.compstruct.2019.111015.
44.
López-GálvezHSoldaniX. Suitability of numerical model from low to high velocity impacts against KM2 fabrics with isotropic hypothesis. Compos Struct2019; 214: 390–396. DOI: 10.1016/j.compstruct.2019.01.083.
45.
WangYXiaY. The effects of strain rate on the mechanical behaviour of kevlar fibre bundles: an experimental and theoretical study. Compos Appl Sci Manuf1998; 29: 1411–1415. DOI: 10.1016/s1359-835x(98)00038-4.
46.
HaqueBZGillespieJW. A new penetration equation for ballistic limit analysis. J Thermoplast Compos Mater2013; 28: 950–972. DOI: 10.1177/0892705713495430.
