Abstract
In this study, the Time-Temperature-Crystallinity Superposition Principle (TTCSP) was applied to determine the viscoelastic behavior of Thermo-rheological Complex Materials (TCM), specifically Carbon fibre/Poly-Ether-Ketone-Ketone (CF/PEKK) composites. The study investigated the effects of various parameters on the viscoelastic behavior of the composites, such as the degree of crystallinity after different melting temperatures, relaxation, and crystallization times. The TTCSP was utilized on the relaxation data to generate great-grand master curves for the degree of crystallinity for different laminate lay-ups. Hot press forming was employed to manufacture samples under different processing conditions, including various melting and cold crystallization temperatures. Differential Scanning Calorimetry (DSC) was employed to calculate the degree of crystallinity of CF/PEKK composites, while the Dynamic Mechanical Analyzer (DMA) was used to obtain the relaxation data. The generated great-grand master curves proved effective in predicting the relaxation behavior of the composites consolidated using single and double hold cycles at different melting temperatures and crystallization times, respectively. The great-grand master curves presented in this study can serve as valuable tool to calibrate key viscoelastic and/or thermo-viscoelastic material models for aerospace-grade CF/PEKK composites. These models are crucial for simulations aimed at predicting residual stresses and process-induced deformations during the thermoforming process.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
