Multi attribute decision making through COPRAS on tensile properties of hybrid fiber metal laminate sandwich structures for aerospace and automotive industries
Restricted accessResearch articleFirst published online October, 2023
Multi attribute decision making through COPRAS on tensile properties of hybrid fiber metal laminate sandwich structures for aerospace and automotive industries
Fiber metal laminates (FMLs) are made by sandwiching a fiber-reinforced composite between thin layers of metal. FMLs are modern materials utilized in the manufacture of automobiles and aircraft because of their improved mechanical behavior compared to conventional metallic alloys. In the current study, different fabrics, that is, jute (J), glass (G), carbon (C), basalt (B), and aramid (A) were used as reinforcing components for composites that were sandwiched between two aluminum (Al) alloy sheets as a metal component in the proposed FMLs. The effect of hybridizing J-reinforced composite with different declared fabrics on the tensile response of the designed FMLs was experimentally investigated. The proposed FMLs were created using manual lay-up and compression casting techniques. Complex proportional assessment (COPRAS) was adapted to find the best FMLs structure that achieved the optimum tensile properties. The Al/2C/4J/2C/Al and Al/8J/Al structures were ranked first and last, respectively, based on COPRAS results.
KrishnakumarS. Fiber metal laminates — The synthesis of metals and composites. Mater Manuf Process1994; 9: 295–354.
2.
SinmazçelikTAvcuEBoraMÖ, et al.A review: Fibre metal laminates, background, bonding types and applied test methods. Mater Des2011; 32: 3671–3685.
3.
LiXZhangXGuoY, et al.Influence of fiber type on the impact response of titanium-based fiber-metal laminates. Int J Impact Eng2018; 114: 32–42.
4.
MegahedMAbd El-bakyMAAlsaeedyAM, et al.An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate. Compos B Eng2019: 176.
5.
HynesNRJVigneshNJJappesJTW, et al.Effect of stacking sequence of fibre metal laminates with carbon fibre reinforced composites on mechanical attributes: Numerical simulations and experimental validation. Compos Sci Technol2022: 221.
6.
SanjayMRMadhuPJawaidM, et al.Characterization and properties of natural fiber polymer composites: A comprehensive review. J Clean Prod2018; 172: 566–581.
7.
VigneshwaranSSundarakannanRJohnKM, et al.Recent advancement in the natural fiber polymer composites: A comprehensive review. J Clean Prod2020: 277.
8.
KarthiNKumaresanKSathishS, et al.An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas. Mater Today Proc2020; 27: 2828–2834.
9.
Abd El-BakyMAAttiaMAAbdelhaleemMM, et al.Flax/basalt/E-glass fibers reinforced epoxy composites with enhanced mechanical properties. J Nat Fibers2020; 19: 954–968.
10.
FarsaniREKhaliliSMRDaghighV. Charpy impact response of basalt fiber reinforced epoxy and basalt fiber metal laminate composites: Experimental study. Int J Damage Mech2013; 23: 729–744.
11.
GunwantD. Prediction of tensile properties of novel natural fiber based fiber metal laminates (FMLs) using FEM. Int J Res Appl Sci Eng Technol2018; 6: 1391–1396.
12.
IshakNMSivakumarDMansorMR. The application of TRIZ on natural fibre metal laminate to reduce the weight of the car front hood. J Braz Soc Mech Sci Eng2018; 40.
13.
Bahari-SambranFMeuchelboeckJKazemi-KhasraghE, et al.The effect of surface modified nanoclay on the interfacial and mechanical properties of basalt fiber metal laminates. Thin-Walled Struct2019: 144.
14.
IshakNMMalingamSDMansorMR, et al.Investigation of natural fibre metal laminate as car front hood. Mater Res Express2021; 8: 025303.
15.
KuanHCantwellWHazizanMA, et al.The fracture properties of environmental-friendly fiber metal laminates. J Reinforc Plast Compos2011; 30: 499–508.
16.
AmuthakkannanPManikandanVUthayakumarM. Mechanical properties of basalt and glass fiber reinforced polymer hybrid composites. J Adv Microsc Res2014; 9: 44–49.
17.
NatrayanLSathishTBaskara SethupathyS, et al.Interlaminar shear, bending, and water retention behavior of Nano-SiO2 filler-incorporated Dharbai/glass fiber-based hybrid composites under cryogenic environment. Adsorpt Sci Technol2022; 2022: 1–10.
18.
VelmuruganGNatrayanLRaoYS, et al.Influence of epoxy/Nanosilica on mechanical performance of Hemp/Kevlar fiber reinforced hybrid composite with an ultrasonic frequency. Adsorpt Sci Technol2022; 2022: 1–11.
19.
GanesanVKaliyamoorthyB. Utilization of taguchi technique to enhance the interlaminar shear strength of wood dust filled woven jute fiber reinforced polyester composites in cryogenic environment. J Nat Fibers2020; 19: 1990–2001.
20.
MavaniSIMehtaNMParsaniaPH. Synthesis, fabrication, mechanical, electrical, and moisture absorption study of epoxy polyurethane–jute and epoxy polyurethane–jute–rice/wheat husk composites. J Appl Polym Sci2007; 106: 1228–1233.
21.
AttiaMAAbd El-BakyMAHassanMA, et al.Crashworthiness characteristics of carbon-jute-glass reinforced epoxy composite circular tubes. Polym Compos2018; 39: E2245–E2261.
22.
SivagurunathanRWaySLTSivagurunathanL, et al.Effects of triggering mechanisms on the crashworthiness characteristics of square woven jute/epoxy composite tubes. J Reinforc Plast Compos2018; 37: 824–840.
23.
El-BakyMAAAllahMMAKamelM, et al.Lightweight cost-effective hybrid materials for energy absorption applications. Sci Rep2022; 12: 21101.
24.
MohammedMRozyantyRMohammedAM, et al.Fabrication and characterization of zinc oxide nanoparticle-treated kenaf polymer composites for weather resistance based on a solar UV radiation. Bioresources2018; 13: 6480–6496.
25.
FengNLDharMalingamSZakariaKA, et al.Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials. J Sandw Struct Mater2017; 21: 2440–2455.
26.
AzghanMAEslami-FarsaniR. The effects of stacking sequence and thermal cycling on the flexural properties of laminate composites of aluminium-epoxy/basalt-glass fibres. Mater Res Express2018; 5.
27.
AzghanMABahari-SambranFEslami-FarsaniR. Modeling and experimental study on the mechanical behavior of glass/basalt fiber metal laminates after thermal cycling. Int J Damage Mech2021; 30: 1192–1212.
28.
ArpatappehFAAzghanMAEslami-FarsaniR. The effect of stacking sequence of basalt and Kevlar fibers on the Charpy impact behavior of hybrid composites and fiber metal laminates. Proc IME C J Mech Eng Sci2020; 234: 3270–3279.
29.
ZareeiNGeranmayehAEslami-FarsaniR. Interlaminar shear strength and tensile properties of environmentally-friendly fiber metal laminates reinforced by hybrid basalt and jute fibers. Polym Test2019; 75: 205–212.
30.
Abd El-BakyMAAlshorbagyAEAlsaeedyAM, et al.Fabrication of cost effective fiber metal laminates based on jute and glass fabrics for enhanced mechanical properties. J Nat Fibers2020; 19: 303–318.
31.
AthanasopoulosGRibaCRAthanasopoulouC. A decision support system for coating selection based on fuzzy logic and multi-criteria decision making. Expert Syst Appl2009; 36: 10848–10853.
32.
AthawaleVMChakrabortyS. Material selection using multi-criteria decision-making methods: a comparative study. Proc Inst Mech Eng Part L2012; 226: 266–285.
33.
RaoRV. A decision making methodology for material selection using an improved compromise ranking method. Mater Des2008; 29: 1949–1954.
34.
LiAZhaoJGongZ, et al.Optimal selection of cutting tool materials based on multi-criteria decision-making methods in machining Al-Si piston alloy. Int J Adv Des Manuf Technol2016; 86: 1055–1062.
35.
ManiyaKBhattMG. A selection of material using a novel type decision-making method: Preference selection index method. Mater Des2010; 31: 1785–1789.
36.
ShanianASavadogoO. A material selection model based on the concept of multiple attribute decision making. Mater Des2006; 27: 329–337.
37.
PodvezkoV. The Comparative Analysis of MCDA Methods SAW and COPRAS, vol. 22. Engineering Economics, 2011.
38.
ZavadskasEKKaklauskasATurskisZ, et al.Contractor selection multi-attribute model applying COPRAS method with grey interval numbers, 2008.
39.
BaroutajiAArjunanASinghG, et al.Crushing and energy absorption properties of additively manufactured concave thin-walled tubes. Results in Engineering2022; 14.
40.
GhoseDPradhanSTamuliP, et al.Optimal material for solar electric vehicle application using an integrated Fuzzy-COPRAS model. Energy Sources, Part A Recovery, Util Environ Eff2019; 45: 3859–3878.
41.
GargH. Algorithms for possibility linguistic single-valued neutrosophic decision-making based on COPRAS and aggregation operators with new information measures. Measurement2019; 138: 278–290.
42.
ZhaoXZhuGZhouC, et al.Crashworthiness analysis and design of composite tapered tubes under multiple load cases. Compos Struct2019; 222.
43.
M Awd AllahMAbdel-AziemWA Abd El-bakyM. Collapse behavior and energy absorbing characteristics of 3D-printed tubes with different infill pattern structures: an experimental study. Fibers Polym2023: 1–14.
44.
DarkoAPLiangD. An extended COPRAS method for multiattribute group decision making based on dual hesitant fuzzy Maclaurin symmetric mean. Int J Intell Syst2020; 35: 1021–1068.
45.
VaratharajuluMDuraiselvamMKumarMB, et al.Multi criteria decision making through TOPSIS and COPRAS on drilling parameters of magnesium AZ91. J Magnesium Alloys2022; 10: 2857–2874.
46.
KraujalienėL. Comparative analysis of multicriteria decision-making methods evaluating the efficiency of technology transfer. Bus Manag Educ2019; 17: 72–93.
47.
GonDDasKPaulP, et al.Jute composites as wood substitute. Int J Textil Sci2013; 1: 84–93.
48.
ShahSSShaikhMNKhanMY, et al.Present status and future prospects of jute in nanotechnology: a review. Chem Rec2021; 21: 1631–1665.
49.
AlshahraniHSebaeyTAAwd AllahMM, et al.Jute-basalt reinforced epoxy hybrid composites for lightweight structural automotive applications. J Compos Mater2023.
50.
MishraVBiswasS. Physical and mechanical properties of bi-directional jute fiber epoxy composites. Procedia Eng2013; 51: 561–566.
51.
Abd El-bakyMAAttiaMA. Experimental study on the improvement of mechanical properties of GLARE using nanofillers. Polym Compos2020; 41: 4130–4143.
52.
BoufaidaZFargeLAndréS, et al.Influence of the fiber/matrix strength on the mechanical properties of a glass fiber/thermoplastic-matrix plain weave fabric composite. Compos Appl Sci Manuf2015; 75: 28–38.
53.
MegahedMTobbalaDEEl-bakyMAA. The effect of incorporation of hybrid silica and cobalt ferrite nanofillers on the mechanical characteristics of glass fiber-reinforced polymeric composites. Polym Compos2020; 42: 271–284.
54.
Awd AllahMMShakerAHassanMA, et al.The influence of induced holes on crashworthy ability of glass reinforced epoxy square tubes. Polym Compos2022.
55.
El AalMIAAwd AllahMMAbd El-bakyMA. Carbon-glass reinforced epoxy hybrid composites for crashworthy structural applications. Polym Compos2023.
56.
AlshahraniHSebaeyTAAwd AllahMM, et al.Multi-response optimization of crashworthy performance of perforated thin walled tubes. J Compos Mater2023; 57: 1579–1597.
57.
AlshahraniHSebaeyTAAwd AllahMM, et al.Quasi-static axial crushing performance of thin-walled tubes with circular hole discontinuities. J Compos Mater2022.
58.
AllahMMAHegazyDAAlshahraniH, et al.Fiber metal laminates based on natural/synthesis fiber composite for vehicles industry: an experimental comparative study. Fibers Polym2023: 1–13.
59.
El-BakyMAAAllahMMAKamelM, et al.Energy absorption characteristics of E-glass/epoxy over-wrapped aluminum pipes with induced holes: an experimental research. Sci Rep2022; 12: 21097.
60.
El-bakyMAAAllahMMAKamelM, et al.Fabrication of glass/jute hybrid composite over Wrapped aluminum cylinders: an advanced material for automotive applications. Fibers and Polymers, 2023.
61.
MegahedMAbd El-bakyMAAlsaeedyAM, et al.Improvement of impact and water barrier properties of GLARE by incorporation of different types of nanoparticles. Fibers Polym2020; 21: 840–848.
62.
MelaibariAAAttiaMAAbd El-bakyMA. Understanding the effect of halloysite nanotubes addition upon the mechanical properties of glass fiber aluminum laminate. Fibers Polym2021; 22: 1416–1433.
63.
MegahedMAli-EldinSSAbd El MoezzSM, et al.Synthesis of developed rice straw sheets and glass fiber-reinforced polyester composites. J Compos Mater2020; 54: 3381–3394.
64.
ZakariaAZShelesh-nezhadKChakherlouTN, et al.Effects of aluminum surface treatments on the interfacial fracture toughness of carbon-fiber aluminum laminates. Eng Fract Mech2017; 172: 139–151.
65.
Sharifi GolruSAttarMMRamezanzadehB. Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating. Appl Surf Sci2015; 345: 360–368.
66.
AlshahraniHSebaeyTAAwd AllahMM, et al.Metal/polymer composite cylinders for crash energy absorption applications. Polym Compos2022.
67.
Moussavi-TorshiziSEDariushiSSadighiM, et al.A study on tensile properties of a novel fiber/metal laminates. Materials Science and Engineering: A2010; 527: 4920–4925.
68.
MegahedMAbd El-bakyMAAlsaeedyAM, et al.Synthesis effect of nano-fillers on the damage resistance of GLARE. Fibers Polym2021; 22: 1366–1377.
69.
De SantisSde FeliceG. Tensile behaviour of mortar-based composites for externally bonded reinforcement systems. Compos B Eng2015; 68: 401–413.
70.
KhashabaUA. In-plane shear properties of cross-ply composite laminates with different off-axis angles. Compos Struct2004; 65: 167–177.
71.
KhashabaUAEl-SonbatyIASelmyAI, et al.Drilling analysis of woven glass fiber-reinforced/epoxy composites. J Compos Mater2012; 47: 191–205.
72.
SelmyAIAbd ElbakyMAGhazyMR, et al.In-plane shear characteristics of unidirectional glass fiber/epoxy functionally graded (FG) and nonfunctionally graded (NFG) composite laminates with statistical analysis. J Compos Mater2014; 49: 3347–3358.
73.
KumarSSridharISivashankerS, et al.Tensile failure of adhesively bonded CFRP composite scarf joints. Mater Sci Eng, B2006; 132: 113–120.
74.
SelmyAIElsesiARAzabNA, et al.Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites. Mater Des2011; 32: 743–749.
75.
AliHQYilmazÇYildizM. The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading. Polym Test2022; 111: 107612.
76.
Abd El-bakyMAAttiaMAAbdelhaleemMM, et al.Mechanical characterization of hybrid composites based on flax, basalt and glass fibers. J Compos Mater2020; 54: 4185–4205.
77.
OhG. A simplified toughness estimation method based on standard tensile data. Int J Pres Ves Pip2022: 199.
78.
SelmyAIAbd El-bakyMAHegazyDA. Mechanical properties of inter-ply hybrid composites reinforced with glass and polyamide fibers. J Thermoplast Compos Mater2018; 32: 267–293.
79.
AttiaMAEl-bakyMAAAbdelhaleemMM, et al.Hybrid composite laminates reinforced with flax-basalt-glass woven fabrics for lightweight load bearing structures. J Ind Textil2020; 51: 4622S–4664S.
80.
Awd AllahMMAbd El-bakyMAHassanMA, et al.Crashworthiness performance of thin-walled Glass/Epoxy square tubes with circular cutouts: an experimental study. Fibers Polym2022; 23: 3268–3281.
81.
TanPTongLStevenG, et al.Behavior of 3D orthogonal woven CFRP composites. Part I. Experimental investigation. Compos Appl Sci Manuf2000; 31: 259–271.
82.
MonteroWFaragRDíazV, et al.Uncertainties associated with strain-measuring systems using resistance strain gauges. J Strain Anal Eng Des2010; 46: 1–13.
83.
WangFLiXZhangJ, et al.Micromechanical modelling of the progressive failure in unidirectional composites reinforced with bamboo fibres. Mech Mater2016; 94: 180–192.
84.
WangFZhouSYangM, et al.Thermo-mechanical performance of polylactide composites reinforced with alkali-treated bamboo fibers, Polymers. vol. 10, 2018.
85.
KhashabaUSeifM. Effect of different loading conditions on the mechanical behavior of [0/±45/90] s woven composites. Compos Struct2006; 74: 440–448.
86.
RouzegarJAssaeeHElahiSM, et al.Axial crushing of perforated metal and composite-metal tubes. J Braz Soc Mech Sci Eng2018; 40.
87.
Dhar MalingamSJumaatFANgLF, et al.Tensile and impact properties of cost-effective hybrid fiber metal laminate sandwich structures. Adv Polym Technol2018; 37: 2385–2393.
88.
ChandrasekarMIshakMSapuanM, et al.Tensile and flexural properties of the hybrid flax/carbon based fibre metal laminate. Proceedings of the 5th postgraduate seminar on natural Fiber Composites2016; 2016: 5–10.
