In this study, a series of experiments and finite element analyses were conducted to investigate the effects of glass fiber sheet (GFS) lamination on the strength of pin-bearing single-bolted pultruded glass-fiber-reinforced polymer (PGFRP) connections. In the experiments, nine types of GFS lamination were molded using the vacuum-assisted resin transfer molding method (VaRTM) and bonded onto the surfaces of PGFRP members. Then, four different end distances of PGFRP plates to bolt diameters (e/d) were surveyed, ranging from 3 to 6. The results indicated that all types of GFS lamination offered excellent improvement effects for the ultimate loads of the PGFRP connections. The strengthening effects were better when the connections had smaller e/d values. In addition, external 0°/90° GFSs provided the best performance for GFS-strengthened PGFRP connections with medium e/d values. Finally, it was demonstrated that finite element analysis (FEA) could be a useful method for predicting the failure loads of GFS-strengthened PGFRP connections.
QureshiJA review of fibre reinforced polymer structures. Fibers2022; 10, 27.
2.
FangHBaiYLiuW, et al.Connections and structural applications of fibre reinforced polymer composites for civil infrastructure in aggressive environments. Compos. B. Eng2019; 164: 129–143.
3.
AliHTAkramiRFotouhiS, et al.Fiber reinforced polymer composites in bridge industry. Structs2021; 30, 774–785.
4.
HuWLiYYuanHReview of experimental studies on application of FRP for strengthening of bridge structures. Adv Mater Sci Eng2020; 2020: 8682163.
5.
NaserMZHawilehRAAbdallaJAFiber-reinforced polymer composites in strengthening reinforced concrete structures: a critical review. Eng struct2019; 198: 109542.
6.
VedernikovASafonovATucciF, et al.Pultruded materials and structures: a review. J Compos Mater2020; 54(26): 4081–4117.
7.
ShinYHYoongYYHejaziH, et al.Review on pultruded FRP structural design for building construction. IOP Conf Ser: Earth Environ Sci2019; 357: 012006.
ZhangZJBaiYXiaoXBonded sleeve connections for joining tubular glass fiber-reinforced polymer beams and columns: experimental and numerical studies. J Compos Constr2018; 22(4), 04018019.
10.
ManaloAAravinthanTFamA, et al.State-of-the-Art review on FRP sandwich systems for lightweight civil infrastructure. J Compos Constr2017; 21: 1–16.
11.
Al-saadiAUAravinthanTLokugeWStructural applications of fibre reinforced polymer (FRP) composite tubes: a review of columns members. Comp Struct2018; 204, 513–524.
12.
TurveyGJBolted connections in PFRP structures. Prog struct eng mater2000; 2: 146–156.
13.
ChenYDuanMZouX, et al.Experimental and numerical investigation of joints for a pultruded fiber-reinforced polymer truss. Polym2022; 14 (22): 4810.
14.
YangKBaiYDingC, et al.Comparative study on mechanical performance of bolted joints with steel and fibre reinforced polymer bolts. J Build Eng202141, 102457.
15.
TurveyGJSingle-bolt tension joint tests on pultruded GRP plate - effects of tension direction relative to pultrusion direction. Comp Struct199842(4), 341–351.
16.
YuanRLLiuCJExperimental characterization of FRP mechanical connections. In: Proc. 3rd Inter Conf. on advanced composite materials in bridges and structures. Quebec, Canada: The Canadian Society for Civil Engineers2000: pp. 103–110.
17.
ParkHJEffects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Comp Struct2001; 53: 213–221.
18.
MandalBChakrabartiANumerical failure assessment of multi-bolt FRP composite joints with varying sizes and preloads of bolts. Comp Struct2018; 187: 169–178.
19.
GaoJZhaoQLiuJ, et al.Effect of transverse clamping force on the tensile behavior of a novel pultruded carbon fiber-reinforced polymer joint: fatigue test. Adv Struct Eng2020; 23(7): 1413–1422.
20.
CoelhoAMGMottramJTA review of the behaviour and analysis of bolted connections and joints in pultruded fibre reinforced polymers. Mater Des201574: 86–107.
21.
LeeYGChoiEYoonSJEffect of geometric parameters on the mechanical behavior of PFRP single bolted connection. Compos B Eng2015; 75: 1–10.
22.
TajeunaTALégeronFLangloisS, et al.Effect of geometric parameters on the behavior of bolted GFRP pultruded plates. J Compos Mater2016; 50(26): 3731–3749.
23.
TurveyGJCooperCReview of tests on bolted joints between pultruded GRP profiles. Proc Inst Civ Eng Struct2004157 (3): pp. 211–233.
24.
AnsariMTASinghKKAzamMSEffect of ply stacking and fiber volume fraction on ILSS of woven GFRP laminates. Proceedings of International Conference in Mechanical and Energy Technology2020174561–568.
25.
NareshKKrishnapillaiSVelmuruganVEffect of fiber orientation on carbon/epoxy and glass/epoxy composites subjected to shear and bending. Solid State Phenom2017267, 103–108.
26.
AktasABearing strength of carbon epoxy laminates under static and dynamic loading. Compos Struct200567: 485–489.
DomenicoBNew composite materials. Berlin, Germany: Springer International Publishing Switzerland2014
29.
JoachimAWünschJWellerBMaterial selection and testing of composite panels made of glass and fibre-reinforced plastic. Glass Struct Eng20216, 103–117.
30.
BankLCComposites for construction: structural design with FRP materials. Hoboken, NJ, John Wiley and Sons, Inc.2006
31.
HeslehurstRBDesign and analysis of structural joints with composite materials. Lancaster, PA: DEStech Pub., Inc2013.
32.
GenedyMChennareddyRSolimanEM, et al.Improving shear strength of bolted joints in pultruded glass fiber reinforced polymer composites using carbon nanotubes. J Reinf Plast201736(13): 958–971.
33.
SolimanEAl-HaikMTahaMROn and off-axis tension behavior of fiber reinforced polymer composites incorporating multi-walled carbon nanotubes. J Compos Mater201246(14): 1661–1675.
34.
YamanakaYTodorokiAUedaM, et al.Fiber line optimization in single ply for 3D printed composites. Open J. Compos Mater201606: 121–131.
35.
SugiyamaKMatsuzakiRMalakhovAV, et al.3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber. Compos Sci Technol2020186: 107905.
36.
MaraVHaghaniRAl-EmraniMImproving the performance of bolted joints in composite structures using metal inserts. J Comp Mater201650(21): 3001–3018.
37.
NhutPVYorestaFSKitaneY, et al.Improving the shear strength of bolted connections in pultruded GFRP using glass fiber sheets. Comp Struct2021255: 112896.
38.
NhutPVYorestaFSKitaneY, et al.On the strengthening of pultruded GFRP connections using glass fiber sheets: a study on the influence of bolt diameter. Appl Compos Mater202229: 651–681.
39.
NhutPVTranQDMatsumotoYPin‐bearing connection strength of single‐bolted pultruded glass fiber‐reinforced polymer profiles strengthened by glass fiber sheet. Polym Compos2022; 43(8): 5011–5030.
40.
JISK7164Plastics-Determination of tensile properties - Part 4:Test conditions for isotropic and orthotropic fibre-reinforced plastic compositesTokyo, JapanMinistry of Economy, Trade and Industry, 2005.
41.
JISK7018Fiber-reinforced plastic composites - determination of compressive properties in the in-plane directionTokyo, JapanMinistry of Economy, Trade and Industry, 2019.
42.
ASTM D 7078/D7078M – 05 standard test method for shear properties of composite materials by V-notched rail shear methodWest Conshohocken, PennsylvaniaAmerican Society for Testing and Materials, 2005.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
