Abstract
Laminated multifunctional composites are highly desired in modern lightweight engineering structures. The purpose of this study is to develop a composite laminate with impact tolerance, delamination healing, strain sensing, Joule heating, deicing, and room temperature shape restoration functionalities. In this study, a novel self-healable and recyclable shape memory vitrimer was used as the matrix, unidirectional glass fabric was used as reinforcement, and tension programmed shape memory alloy (SMA) wires were used as z-pins. To provide multifunctionality, the programmed SMA wires were further twisted and formed into sinusoidal shape. Copper wire strands were hooked to the sinusoidal SMA z-pins to make them a closed circuit. Low velocity impact, compression after impact, damage self-healing, deicing, and room temperature shape restoration tests were conducted. The tests result show that the desired multifunctionality of the laminated composite was achieved. The hybrid laminate provides a promising design for lightweight load-carrying engineering structures.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
