The objective was to evaluate the effect of glycerol on functional properties and sorption behavior of films elaborated with myofibrillar proteins of fish. Analyses of solubility, water vapor permeability (WVP), tensile strength (TS), elongation, and moisture sorption isotherms were performed. Films with lower glycerol concentrations (5, 10, and 15%) showed lower (p ≤ 0.05) permeability when compared to films with 30 and 40%. The increase in the glycerol concentration decreased the TS and increased the elongation of the lyophilized myofibrillary protein films (p ≤ 0.05). Glycerol significantly affected the solubility properties, with an increase of 95.96%. In the sorption process, the films presented curves types II and III, in which high concentrations of glycerol increased their water content. The sorption hysteresis decreased when the concentration of glycerol increased up to its disappearance in films with 40% glycerol. The GAB model was adequate to represent the sorption process of biodegradable films in the relative humidity range of 10–85% under the studied conditions. Films based on fish myofibrillar proteins in the presence of glycerol increase the water's binding capacity to mono and multilayers, and depending on the packaged food, like fresh produce, can preserve the moisture in the food, prolonging its shelf-life.
ValenteBSXavierEGPereiraHS, et al. Composting in residues management of freshwater fish. Bol Do Ins Pesca2014; 40: 95–103.
2.
PiresMBMagnoFSAraújoJL. Obtaining a protein isolate extracted from by-products of acoupa weakfish (Cynoscion acoupa). In: Vieira VB and Piovesan N (eds) Innovation in food science and technology. vol. 1. Ponta Grossa, PR: Atena, 2019, pp.216–227.
3.
AssisRQLopesSMCostaTMH, et al. Active biodegradable cassava starch films incorporated lycopene nanocapsules. Ind Crops Prod2017; 109: 818–827.
4.
FélixMVillegasLRomeroA, et al. Development of rice protein bio-based plastic materials processed by injection molding. Ind Crops Prod2016; 79: 152–159.
5.
PereiraGVSPereiraGVSAraujoEF, et al. Optimized process to produce biodegradable films with myofibrillar proteins from fish byproducts. Food Packag Shelf Life2019; 21: 100364.
6.
PereiraGVSPereiraGVSNevesEMPX, et al. Effect of adding fatty acids and surfactant on the functional properties of biodegradable films prepared with myofibrillar proteins from acoupa weakfish (Cynoscion acoupa). Food Sci Technol2019; 39: 287–294.
7.
KaewprachuPOsakoKBenjakulS, et al. Effect of protein concentrations on the properties of fish myofibrillar protein based film compared with PVC film. J Food Sci Technol2016; 53: 2083–2091.
8.
Van der WelGKAdanOCG.Moisture in organic coatings – a review. Prog Org Coatings1999; 37: 1–14.
9.
TorresMDChenloFMoreiraR.Structural features and water sorption isotherms of carrageenans: a prediction model for hybrid carrageenans. Carbohydr Polym2018; 180: 72–80.
10.
ChiumarelliMHubingerMD.Stability, solubility, mechanical and barrier properties of cassava starch – carnauba wax edible coatings to preserve fresh-cut apples. Food Hydrocoll2012; 28: 59–67.
11.
SobralPJAMenegalliFCHubingerMD, et al. Mechanical, water vapor barrier and thermal properties of gelatin based edible films. Food Hydrocoll2001; 15: 423–432.
12.
ChantaweeKRiyajanS-A.Effect of glycerol on the physical properties of carboxylated Styrene-Butadiene rubber/cassava starch blend films. J Polym Environ2019; 27: 50–60.
13.
HuXZhangXTianM, et al. Robust ultraviolet shielding and enhanced mechanical properties of graphene oxide/sodium alginate composite films. J Compos Mater2016; 50: 2365–2374.
14.
SabaghiMMaghsoudlouYHabibiP.Enhancing structural properties and antioxidant activity of kefiran films by chitosan addition. Food Struct2015; 5: 66–71.
15.
BergoPMoraesICFSobralPJA.Effects of different moisture contents on physical properties of PVA-gelatin films. Food Biophys2012; 7: 354–361.
16.
OthmanSHEdwalSAMRisyonNP, et al. Water sorption and water permeability properties of edible film made from potato peel waste. Food Sci Technol2017; 37: 63–70.
DelgadoJFPeltzerMAWagnerJR, et al. Hydration and water vapour transport properties in yeast biomass-based films: a study of plasticizer content and thickness effects. Eur Polym J2018; 99: 9–17.
19.
IchikawaKMoriTKitanoH, et al. Fourier transform infrared study on the sorption of water to various kinds of polymer thin films. J Polym Sci B Polym Phys2001; 39: 2175–2182.
20.
LaemmliUK.Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature1970; 227: 680–685.
21.
American Society for Testing and Materials (ASTM). Annual book of ASTM standards. Philadelphia, PA, USA: American Society for Testing and Materials, 2003.
22.
GontardNGuilbertSCuqJ-L.Edible wheat gluten films: influence of the main process variables on film properties using response surface methodology. J Food Science1992; 57: 190–195.
23.
American Society for Testing and Materials (ASTM) D882-91. Annual book of ASTM standards. Standard test methods for tensile properties of thin plastic sheeting. Philadelphia: American Society for Testing and Materials, 1996.
24.
Association of Official Analytical Chemists (AOAC). Official methods of 494 analysis. In: Horwitz W (ed.) AOAC 495 international. vols. 1 and 2, 17th ed. Gaithersburg, MD, USA: Association of Official Analytical Chemists, 2000, p.2200.
25.
BrunauerSEmmettPHTellerE.Adsorption of gases in multimolecular layers. J Am Chem Soc1938; 60: 309–319, 510.
26.
Van den BergC. Description of the water activity of food for engineering purposes using the GAB sorption model. In: McKenna BM (ed.) Engineering and foods. vol. 1. New York, United States: Elsevier Applied Science Publishers, 1984, pp.311–321.
27.
OswinCR.The kinetics of package life. III. The isotherm. J Chem Technol Biotechnol1946; 65: 419–421.
28.
PelegM.An empirical model for the description of moisture sorption curves. J Food Science1988; 53: 1216–1217.
29.
HalseyG.Physical adsorption on non‐uniform surfaces. J Chem Phys1948; 16: 931–937.
30.
HendersonSMA basic concept of equilibrium moisture. Agric Eng1952; 33: 29–32.
31.
MontgomeryDCRungerGC.Applied statistics and probability for engineers. 7th ed. Hoboken, Nova Jersey, USA: John Wiley & Sons, Inc., 2018, p.564.
32.
AraújoCSRodriguesAMCPeixoto JoeleMRS, et al. Optmizing process parameters to obtain a bioplastic using proteins from fish byproducts through the response surface methodology. Food Packag Shelf Life2018; 16: 23–30.
33.
KaewprachuPOsakoKRawdkuenS.Effects of plasticizers on the properties of fish myofibrillar protein film. J Food Sci Technol2018; 55: 3046–3055.
34.
XuXLiBKennedyJF, et al. Characterization of konjac glucomannan–gellan gum blend films and their suitability for release of nisin incorporated therein. Carbohydr. Polym2007; 70: 192–197.
35.
PereiraGVSPereiraGVSNevesEMPX, et al. Glycerol and fatty acid influences on the rheological and technological properties of composite films from residues of Cynoscion acoupa. Food Biosci2020; 38: 100773.
36.
ShrinerRLFusonRC.Identificação sistemática de compostos orgânicos. Rio de Janeiro, RJ: Publisher Guanabara Dois S.A. 1983.
37.
HoqueMSBenjakulSProdpranT.Effects of partial hydrolysis and plasticizer content on the properties of film from cuttlefish (Sepia pharaonis) skin gelatin. Food Hydrocoll2011; 25: 82–90.
38.
FanMHuTZhaoS, et al. Gel characteristics and microstructure of fish myofibrillar protein/cassava starch composites. Food Chem2017; 218: 221–230.
39.
ParkHJChinnanMS.Gas and water vapor barrier properties of edible films from protein and cellulosic materials. J Food En1995; 25: 497–507.
40.
SouzaSMASobralPJAMenegalliFC.Physical properties of edible films based on bovine myofibril proteins. Semina: Ciênc Agràr2012; 33: 283–296.
41.
KaewprachuPOsakoKRungraengN, et al. Characterization of fish myofibrillar protein film incorporated with catechin-Kradon extract. Int. J. Biol. Macromol2018; 107: 1463–1473.
42.
ZavarezeERHalalSLMETellesAC, et al. Biodegradable films based on myofibrillar proteins of fish. Braz J Food Technol2012; 15: 53–57.
43.
CuqBGontardNCuqJL, et al. Selected functional properties of fish myofibrillar Protein-Based films as affected by hydrophilic plasticizers. J Agric Food Chem1997; 45: 622–626.
44.
VieiraMGASilvaMASantosLO, et al. Natural-based plasticizers and biopolymer films: a review. Eur Polym J2011; 47: 254–263.
45.
KaewprachuPOsakoKBenjakulS, et al. Biodegradable protein-based films and their properties: a comparative study. Packag Technol Sci2016; 29: 77–90.
46.
WihodoMMoraruC.Physical and chemical methods used to enhance the structure and mechanical properties of protein films: a review. J Food Eng2013; 114: 292–302.
47.
SanyangMLSapuanSMJawaidM, et al. Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (Arenga pinnata) starch for food packaging. J Food Sci Technol2016; 53: 326–336.
48.
MohammadiNATabatabaeiRHPashaniaB, et al. Effects of ascorbic acid and sugars on solubility, thermal, and mechanical properties of egg white protein gels. Int J Biol Macromol2013; 62: 397–404.
BrunauerSDemingLSDemingWE, et al. On a theory of the van der Waals adsorption of gases. J Am Chem Soc1940; 62: 1723–1731.
51.
MedeirosMLAyrosaAMIBPitomboRNM, et al. Sorption isotherms of cocoa and cupuassu products. J Food Eng2006; 73: 402–406.
52.
NgKCBurhanMShahzadMW, et al. A universal isotherm model to capture adsorption uptake and energy distribution of porous heterogeneous surface. Sci Rep2017; 7: 1–11.
53.
LecetaIUrangaJAranaP, et al. Valorisation of fishery industry wastes to manufacture sustainable packaging films: modelling moisture-sorption behaviour. J Clean Prod2015; 91: 36–42.
54.
TownsJK.Moisture content in proteins: its effects and measurement. J Chromatogr A1995; 705: 115–127.
55.
RajiAOOjediranJO.Moisture sorption isotherms of two varieties of millet. Food Bioprod Process J2011; 9: 178–184.
56.
CaurieM.Hysteresis phenomenon in foods. Int J Food Sci Tech2007; 42: 45–49.
57.
RaoKS.Hysteresis in sorption. VI: Disappearance of the hysteresis loop. The rôle of elasticity of organogels in hysteresis in sorption. Sorption of water on some cereals. J Phys Chem1941; 45: 531–539.
58.
Aguirre-LoredoRYRodriguez-HernandezAIVelazquezG.Modelling the effect of temperature on the water sorption isotherms of chitosan films. Food Sci Technol2016; 37: 112–118.
59.
CrapisteGHRotsteinE.Prediction of sorptional equilibrium data for Starch-Containing foodstuffs. J Food Science1982; 47: 1501–1507.
60.
BizotH, Using the “GAB” model to construct sorption isotherms. In: Jowit R, Escher F, Hallistrom B, et al. (eds) Physical properties of foods. London: Applied Science Publishers, 1984, pp.27–41.
61.
OthmanSHKechikNRAShapi’iRA, et al. Water sorption and mechanical properties of starch/chitosan nanoparticle films. J Nanomater2019; 2019: 12.
62.
PedroMAMTelis-RomeroJTelisVRN.Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder. Ciênc Tecnol Aliment2010; 30: 993–1000.
63.
GabasALTelis-RomeroJGiraldo-GómezGI, et al. Propiedades termodinámicas de sorción de água de la pulpa de lulo en polvo con encapsulantes. Ciênc Tecnol Aliment2009; 29: 911–918.
64.
LewickiPP.The applicability of the GAB model to food water sorption isotherms. Int J Food Sci Technol1997; 32: 553–557.
65.
ChangLSKarimRMohammedAS, et al. Moisture sorption isotherm and shelf-life prediction of anticaking agent incorporated spray-dried soursop (Annona muricata L.) powder. J Food Process Eng2019; 42: 1–10.
66.
CarvalhoBRAGrossoCRFSobralPJA.Effect of chemical treatment on the mechanical properties, water vapour permeability and sorption isotherms of gelatin-based films. Packag Technol Sci2008; 21: 165–169.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
