This work presents a novel approach to quantify the nonlinear shear stress-strain behavior of carbon fiber reinforced polymer composites without finite element stress calculation. Full-field noncontact deformation measurements using Digital Image Correlation are used to measure surface strains in Short Beam Shear IM7/8552 specimens. The presented spline-based optimization technique solves the inverse problem of generating both axial and shear stress-strain curves without ad hoc assumptions on the material model. Accuracy of the analysis method was verified by finite element analysis (FEA). This method improves on available closed-form and iterative FEA based solutions due to flexibility and accuracy without the computational expense.
NikishkovYMakeevASeonG.Progressive fatigue damage simulation method for composites. Int J Fatigue2013;
48: 266–279.
2.
ASTM Standard D4762.Standard guide for testing polymer matrix composite materials. West Conshohocken, PA: Author, 2017.
3.
ChaterjeeSAdamsDFOplingerDW.Test methods for composites a status report. Volume III. Shear Test Methods. Report DOT/FAA/CT-93/17, *III, Federal Aviation Admin. (Atlantic City, N.J.), June 1993.
4.
RamaultCMakrisASolH, et al. Development of an inverse method for material characterization using a biaxially loaded cruciform composite specimen. In: Proc SEM Annu Conf. Albuquerque, New Mexico, USA, 1-4 June 2009.
5.
GuXPierronF.Towards the design of a new standard for composite stiffness identification. Compos Part A Appl Sci Manuf2016;
91: 448–460.
6.
Sutton MA, Orteu J and Schreier HW (eds). Image correlation for shape, motion and deformation measurements. New York, NY: Springer Science+Business Media, LLC, 2009.
7.
LenoirNBornertMDesruesJ, et al.
Volumetric digital image correlation applied to x-ray microtomography images from triaxial compression tests on argillaceous rock. Strain2007;
43: 193–205..
8.
MakeevASeonGClineJ, et al.
In quest of methods for measuring 3D mechanical properties of composites. Compos Sci Technol2014;
100: 105–112.
9.
SeonGMakeevAClineJ, et al.
Assessing 3D shear stress-strain properties of composites using digital image correlation and finite element analysis based optimization. Compos Sci Technol2015;
117: 371–378.
10.
MakeevAHeYCarpentierP, et al.
A method for measurement of multiple constitutive properties for composite materials. Compos Part A Appl Sci Manuf2012;
43: 2199–2210.
11.
CarpentierPMakeevA.Novel methods for assessment of three-dimensional constitutive properties for composites. Kem2010;
452-453: 401–404.
12.
ASTM Standard D2344. Standard test method for short-beam strength of polymer matrix composite materials and their laminates. West Conshohocken, PA: ASTM, 2016.
13.
MerzkirchMFoeckeT.Investigation of the interlaminar shear properties of fiber-reinforced polymers via flexural testing using digital image correlation. Mater Perform Charact2020;
9: 666–674.
KavanaghKTCloughRW.Finite element applications in the characterization of elastic solids. Int J Solids Struct 1971; 7: 11–23.
16.
MahnkenRSteinE.A unified approach for parameter identification of inelastic material models in the frame of the finite element method. Comput Methods Appl Mech Eng1996;
136: 225–258.
17.
ChanAChiuWKLiuXL.Determining the elastic interlaminar shear modulus of composite laminates. Compos Struct2007;
80: 396–408.
18.
GenoveseKLambertiLPappalettereC.A new hybrid technique for in-plane characterization of orthotropic materials. Exp Mech2004;
44: 584–592.
19.
PottierTToussaintFVacherP.Contribution of heterogeneous strain field measurements and boundary conditions modelling in inverse identification of material parameters. Eur J Mech A/Solids2011;
30: 373–382.
20.
HildFRouxS.Digital image correlation: from displacement measurement to identification of elastic properties - A review. Strain2006;
42: 69–80.
21.
ZenkourAM.Generalized shear deformation theory for bending analysis of functionally graded plates. Appl Math Model2006;
30: 67–84.
22.
MagnuckiKMalinowskiMMagnucka-BlandziE, et al.
Three-point bending of a short beam with symmetrically varying mechanical properties. Compos Struct2017;
179: 552–557.
23.
CuiHKoussiosSLiY, et al.
Measurement of adhesive shear properties by short beam shear test based on higher order beam theory. Int J Adhes Adhes2013;
40: 19–30.
24.
SabikA.Direct shear stress vs strain relation for fiber reinforced composites. Compos Part B Eng2018;
139: 24–30.
25.
AvrilSBonnetMBretelleAS, et al.
Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech2008;
48: 381–402.
26.
FlorentinELubineauG. Identifiying product behaviour using constitutive equation gap method. In: IDMME – virtual concept2010, Bordeaux, France, 20–22 October 2010.
27.
CalderónAP. On an inverse boundary value problem. In: Seminar on numerical analysis and its applications to continuum physics. Rio de Janeiro: Soc. Brasilian de Matematica, 1980, pp.65–73.
28.
LubineauGFlorentinE.The global equilibrium method and its hybrid implementation for identifying heterogeneous elastic material parameters. Comput Struct2011;
89: 656–667.
29.
GrédiacM.The use of full-field measurement methods in composite material characterization: interest and limitations. Compos Part A Appl Sci Manuf2004;
35: 751–761.
30.
GrédiacMPierronF.Identifying constitutive parameters from heterogeneous strain fields using the virtual fields method. Proc IUTAM2012;
4: 48–53.
31.
RahmaniBVillemureILevesqueM.Regularized virtual fields method for mechanical properties identification of composite materials. Comput Methods Appl Mech Eng2014;
278: 543–566.
32.
MarkiewiczELangrandB.Characterisation and parameters identification of materials constitutive and damage models: from normalised direct approach to most advanced inverse problem resolution. Proc Eng2017;
173: 33–40.
33.
MakeevAHeYSchreierH.Short-beam shear method for assessment of stress-strain curves for fibre-reinforced polymer matrix composite materials. Strain2013;
49: 440–450.
34.
HeYMakeevA.Nonlinear shear behavior and interlaminar shear strength of unidirectional polymer matrix composites: a numerical study. Int J Solids Struct2014;
51: 1263–1273.
35.
HeTLiuLMakeevA, et al.
Characterization of stress-strain behavior of composites using digital image correlation and finite element analysis. Compos Struct2016;
140: 84–93.
36.
SeonGMakeevAVan Der VossenB, et al. DIC data driven methods to verify simplifying assumptions and increase confidence in material properties of laminated composites. In: 32nd Technical Conference of the American Society for Composites 2017, Purdue, 23–25 October 2017.
37.
WisnomMR.Modelling of stable and unstable fracture of short beam shear specimens. Composites1994;
25: 394–400.
38.
MarlettK.Hexcel 8552 IM7 unidirectional qualification material property data report. Wichita, 2011.
39.
JonesIBiggerRBlaysatB, et al.
A good practices guide for digital image correlation. Int Digit Image Correl Soc2018; 69–75.
40.
MakeevACarpentierPShonkwilerB.Methods to measure interlaminar tensile modulus of composites. Compos Part A Appl Sci Manuf2014;
56: 256–261.
41.
CarpentierPMakeevALiuL, et al.
An improved short-beam method for measuring multiple constitutive properties for composites. J Test Eval2016;
44: 20130335.
HeYMakeevAShonkwilerB.Characterization of nonlinear shear properties for composite materials using digital image correlation and finite element analysis. Compos Sci Technol2012;
73: 64–71.
44.
RambergWOsgoodWR. Description of stress-strain curves by three parameters. USA: National Advisory Committee for Aeronautics, 1943.
